`uv_fs_utime()` and `uv_fs_futime()` receive the timestamp as
a `double` and then convert it to `struct timeval` or `struct timespec`
where necessary but the calculation for the sub-second part exhibited
rounding errors for dates in the deep past or the far-flung future,
causing the timestamps to be off by sometimes over half a second on
unix, or to be reinterpreted as unsigned and end up off by more than
just sign but many also decades.
Fixes: https://github.com/nodejs/node/issues/32369 (partially)
PR-URL: https://github.com/libuv/libuv/pull/2747
Co-authored-by: Jameson Nash <vtjnash@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/libuv/libuv/pull/3031
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
With the addition of `uv_timer_get_due_in()` it's observable with tools like
valgrind that the `timer->timeout` field isn't initialized until the timer
is started.
Fixes the following valgrind warning when running the `timer_init` test:
==325215== Conditional jump or move depends on uninitialised value(s)
==325215== at 0x1B0131: uv_timer_get_due_in (timer.c:134)
==325215== by 0x19AF09: run_test_timer_init (test-timer.c:164)
==325215== by 0x119FF1: run_test_part (runner.c:376)
==325215== by 0x11875D: main (run-tests.c:68)
==325215==
==325215== Conditional jump or move depends on uninitialised value(s)
==325215== at 0x19AF1F: run_test_timer_init (test-timer.c:164)
==325215== by 0x119FF1: run_test_part (runner.c:376)
==325215== by 0x11875D: main (run-tests.c:68)
Fixes: https://github.com/libuv/libuv/issues/3020
PR-URL: https://github.com/libuv/libuv/pull/3038
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Richard Lau <rlau@redhat.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Equivalents of `pipe` and `socketpair` for cross-platform use.
PR-URL: https://github.com/libuv/libuv/pull/2953
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Return `UV_EINVAL` when one or more arguments are NULL.
Fixes: https://github.com/libuv/help/issues/137
PR-URL: https://github.com/libuv/libuv/pull/2795
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
The behavior of `uv_read_start()` when the handle is closing or already
busy reading wasn't consistent across platforms. Now it is.
Fixes: https://github.com/libuv/help/issues/137
PR-URL: https://github.com/libuv/libuv/pull/2795
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
The seccomp filter with older Android SDKs kills the process when libuv
tries to make system calls it doesn't know about.
This commit adds ifdef guards that stop libuv from making those system
calls with affected SDKs.
Fixes: https://github.com/libuv/libuv/issues/2923
PR-URL: https://github.com/libuv/libuv/pull/3027
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
`ssize_t` is 32 bits on 32 bits architectures, `off_t` is 64 bits
(because libuv builds with `-D_LARGEFILE_SOURCE`.)
Introduced in commit ca10e36149 ("linux: use copy_file_range for
uv_fs_copyfile when possible") merged in July of this year.
Fixes: https://github.com/libuv/libuv/issues/3011
PR-URL: https://github.com/libuv/libuv/pull/3028
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <rlau@redhat.com>
Fix a bug where libuv forgets about EADDRINUSE errors reported earlier:
uv_tcp_bind() + uv_tcp_connect() seemingly succeed but the socket isn't
actually bound to the requested address.
This bug goes back to at least 2011 if indeed it ever worked at all.
PR-URL: https://github.com/libuv/libuv/pull/2218
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Android/i386 doesn't have separate sendmmsg/recvmmsg system calls,
they're multiplexed through the socketcall system call.
(More precisely, the system calls may be present but the standard
seccomp filter rejects them, whereas socketcall is whitelisted.)
This commit removes the flags and timeout arguments from libuv's
internal system call wrappers because they're always zero and it
makes EINVAL/ENOSYS detection after a failed socketcall() easier.
Fixes: https://github.com/libuv/libuv/issues/2923
PR-URL: https://github.com/libuv/libuv/pull/2925
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit initializes user_timeout in uv__io_poll to avoid a
maybe-uninitialized warning:
$ cmake .. -DCMAKE_C_FLAGS="-Wmaybe-uninitialized -O3"
...
[ 14%] Building C object CMakeFiles/uv.dir/src/unix/tty.c.o
/libuv/libuv/src/unix/linux-core.c: In function ‘uv__io_poll’:
/libuv/libuv/src/unix/linux-core.c:351:10: warning:
‘user_timeout’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
351 | if (timeout == -1)
| ^
PR-URL: https://github.com/libuv/libuv/pull/2976
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit includes patches from dports to fix the DragonFly
BSD build. It also removes the now unused uv_exepath_procfs().
PR-URL: https://github.com/libuv/libuv/pull/2952
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
On Windows allow utf-16 surrogate pars to pass through, which allows
conhost on newer Windows versions and other terminal emulators to be
able to render them.
Fixes: https://github.com/libuv/libuv/issues/2909
PR-URL: https://github.com/libuv/libuv/pull/2971
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Libuv was using _POSIX_PATH_MAX wrong. Bug introduced in commit b56d279b
("unix: do not require PATH_MAX to be defined") from September 2018.
_POSIX_PATH_MAX is the minimum max path size guaranteed by POSIX, not
the actual max path size of the system libuv runs on. _POSIX_PATH_MAX
is always 256, the real max is often much bigger.
This commit fixes buffer overruns when processing very long paths in
uv_fs_readlink() and uv_fs_realpath() because libuv was not allocating
enough memory to store the result.
Fixes: https://github.com/libuv/libuv/issues/2965
PR-URL: https://github.com/libuv/libuv/pull/2966
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
On Windows when connecting to an unavailable port, the connect() will
retry for 2s, even on loopback devices. This uses a call to WSAIoctl to
make the connect() call fail instantly on local connections.
PR-URL: https://github.com/libuv/libuv/pull/2896
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Contents of template variable passed for posix call mkstemp on error
code EINVAL is unknown. On AIX platform, template will get clobbered
on EINVAL and any attempt to read template might result in error.
In libuv, req->path is passed directly to the mkstemp call and
behavior of this string on error is platform dependent. To avoid
portability issues, it's better to have a common behavior on all
platform. For both unix and windows platform libuv will rewrite path
with an empty string on all error cases.
Fixes: https://github.com/libuv/libuv/issues/2913
Refs: https://github.com/nodejs/node/pull/33549
Refs: https://github.com/libuv/libuv/pull/2933
PR-URL: https://github.com/libuv/libuv/pull/2938
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Store a copy of the original argv[0] to protect `uv_exepath()`
against `uv_set_process_title()` changing the value of argv[0].
Extract common code for finding a program on the current PATH.
Fixes: https://github.com/libuv/libuv/issues/2674
PR-URL: https://github.com/libuv/libuv/pull/2677
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
This commit updates uv_{get,set}_process_title() to return an
error when uv_setup_args() is needed, but has not been called.
Per-platform behavior after this commit:
- Windows: uv_setup_args() does nothing, get/set process title
works as before.
- Unix: get/set process title will return ENOBUFS if
uv_setup_args() wasn't called, if it failed, or if the process
title memory has been freed by uv__process_title_cleanup()
(via uv_library_shutdown()).
- AIX: set process title returns ENOBUFS if uv_setup_args()
wasn't called, if it failed to allocate memory for the argv
copy, or if the proctitle memory has been freed by
uv__process_title_cleanup() (via uv_library_shutdown).
Getting the process title will do the same except it can
still succeed if uv_setup_args() was called but failed to
allocate memory for the argv copy.
- BSD: uv_setup_args() is only needed for getting the initial
process title; if uv_setup_args() is not called then any
get_process_title calls() before a set_process_title() call
will return an empty string.
- Platforms that use no-proctitle.c: get will return an empty
string, set is a no-op (these are the same as before this commit)
Fixes: https://github.com/libuv/libuv/issues/2845
PR-URL: https://github.com/libuv/libuv/pull/2853
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
This commit handles the case where the source and destination
are the same. This behavior was originally addressed in #2298,
but the test added in that PR doesn't validate the file size
after the operation. This commit also updates the test to check
for that case.
Refs: https://github.com/libuv/libuv/pull/2298
Refs: https://github.com/nodejs/node/issues/34624
PR-URL: https://github.com/libuv/libuv/pull/2947
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
This switches uv_cpu_info from using sysctlbyname to
using IOKit to get the speed of the processors.
macOS on ARM does not currently have the hw.cpufrequency
sysctl. We are able to reliable get the clock frequency
on all architectures by using IOKit.
Fixes: https://github.com/libuv/libuv/issues/2911
PR-URL: https://github.com/libuv/libuv/pull/2914
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
No functional changes are intended [NFCI], but this may make it easier
in the future to implement and respect the `modes` flag.
PR-URL: https://github.com/libuv/libuv/pull/2921
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
The API addition `uv_metrics_idle_time()` is a thread safe call that
allows the user to retrieve the amount of time the event loop has spent
in the kernel's event provider (i.e. poll). It was done this way to
allow retrieving this value without needing to interrupt the execution
of the event loop. This option can be enabled by passing
`UV_METRICS_IDLE_TIME` to `uv_loop_configure()`.
One important aspect of this change is, when enabled, to always first
call the event provider with a `timeout == 0`. This allows libuv to know
whether any events were waiting in the event queue when the event
provider was called. The importance of this is because libuv is tracking
the amount of "idle time", not "poll time". Thus the provider entry time
is not recorded when `timeout == 0` (the event provider never idles in
this case).
While this does add a small amount of overhead, when enabled, but the
overhead decreases when the event loop has a heavier load. This is
because poll events will be waiting when the event provider is called.
Thus never actually recording the provider entry time.
Checking if `uv_loop_t` is configured with `UV_METRICS_IDLE_TIME` always
happens in `uv__metrics_set_provider_entry_time()` and
`uv__metrics_update_idle_time()`. Making the conditional logic wrapping
each call simpler and allows for instrumentation to always hook into
those two function calls.
Rather than placing the fields directly on `uv__loop_internal_fields_t`
add the struct `uv__loop_metrics_t` as a location for future metrics API
additions.
Tests and additional documentation has been included.
PR-URL: https://github.com/libuv/libuv/pull/2725
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Add struct `uv__loop_internal_fields_t` as a location for future
additions to `uv_loop_t` while also maintaining v1.x compatibility.
Currently `uv__loop_internal_fields_t` only contains the `flags` field.
The reason for adding the `flags` field is because the same field was
never added to `UV_LOOP_PRIVATE_FIELDS` in Windows as it was in Unix.
The idea for creating a struct and attaching it to `uv_loop_t` for
future API enhancements was taken from a comment by bnoordhuis in:
https://github.com/libuv/libuv/issues/2506#issuecomment-540050665
Also add `internal_fields` to `uv_loop_t` to store the pointer to
`uv__loop_internal_fields_t`. This naming makes more sense than just
using `active_reqs.unused[1]`. To maintain ABI compatibility, shrink the
`unused` array.
PR-URL: https://github.com/libuv/libuv/pull/2725
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
This is a port of 70002c80 to z/OS to fix the same potential issue that
could effectively enter an infinite loop (but not a busy loop) under
certain conditions when polling for events.
PR-URL: https://github.com/libuv/libuv/pull/2725
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Allows for determining if a buffer large enough for multiple dgrams
should be allocated in alloc_cb of uv_udp_recvstart, for example.
Contributes towards #2822.
PR-URL: https://github.com/libuv/libuv/pull/2830
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
This fix avoids inserting a duplicate pending request in the case where
`WSARecv()` returns an error (e.g. when a connection has been terminated
by its peer) when `uv_read_start()` is called in a read callback.
Fixes: https://github.com/libuv/libuv/issues/2687
PR-URL: https://github.com/libuv/libuv/pull/2688
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
PR-URL: https://github.com/libuv/libuv/pull/2895
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
This was part of commit c70dd705 ("unix: use relaxed loads/stores for
feature checks") and was reviewed as such but I accidentally dropped
it in the rebase before the final merge.
Fixes: https://github.com/libuv/libuv/issues/2884
PR-URL: https://github.com/libuv/libuv/pull/2886
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
This issue manifested on `connected` udp sockets trying to send
datagrams to a non-existent server and returning `ECONNREFUSED` because
an ICMP error was received before the actual sending was performed.
PR-URL: https://github.com/libuv/libuv/pull/2899
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
It was reported that mach_absolute_time() can jump backward in time when
the machine is suspended. Use mach_continuous_time() when available to
work around that (macOS 10.12 and up.)
Fixes: https://github.com/libuv/libuv/issues/2891
PR-URL: https://github.com/libuv/libuv/pull/2894
Reviewed-By: Phil Willoughby <philwill@fb.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
`__atomic_load_n()` and friends were added in gcc 4.7.0 but we still
have some centos6 machines with a vintage gcc 4.4.7 from 2012 in the
CI matrix.
PR-URL: https://github.com/libuv/libuv/pull/2888
Refs: https://github.com/libuv/libuv/pull/2886
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Make ThreadSanitizer stop complaining about the static variables that
libuv uses to record the presence (or lack) of system calls and other
kernel features.
Fixes: https://github.com/libuv/libuv/issues/2884
PR-URL: https://github.com/libuv/libuv/pull/2886
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
The variable uv__read_console_status is left as IN_PROGRESS when the
operation is canceled ahead of time by the main thread requesting a
trap (race condition?).
This confuses the next call to uv__cancel_read_console(...) causing
a deadlock due to a semaphore acquisition that is never released by
the reading thread.
Setting the status variable back to COMPLETE or NOT_STARTED fixes
the issue.
Ref: https://github.com/nodejs/node/issues/32999
PR-URL: https://github.com/libuv/libuv/pull/2882
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
