Use atomic compare-and-swap to detect if we've been preempted by another thread
and therefore can avoid making the expensive write() syscall.
Speeds up the heavily contended case by about 1-2% and has little if any impact
on the non-contended case. I wasn't able to measure the difference at any rate.
There were too many errors in this commits; it totally broke on
Windows. Besides, when the moon is dark, the cleanup code could delete
some random files from my hard drive.
This reverts commit 7573f4a4c4.
accept4() piggybacks on the socketcall() on i386. socketcall() has the flaw
that it returns EINVAL instead of ENOSYS when the operation is not supported.
The problem is that accept4() also returns EINVAL when its flag argument is
invalid.
Try to discern between the two failure cases to the best of our abilities.
This fixes the issue that a mount point would be treated as a
symlink, but readlink would subsequently return an NT namespaced
path that is unusable for many purposes.
This also pre-emptively fixes the problems that would arise when
an user has a reparse point whose tag is neither
IO_REPARSE_TAG_MOUNT_POINT nor IO_REPARSE_TAG_SYMLINK.
Finally uv_lstat() will now return the correct length in st_size.
Previously the length was computed incorrectly for relative
symlinks, and those that had non-ascii characters in their target.
Or rather, don't assume that dlopen() does *not* clobber dlerror().
Joe Ferner reports that loading libjava on OS X sets dlerror() even when
dlopen() succeeds, which makes uv_dlopen() raise an error when it shouldn't.
I haven't been able to reproduce it but it's possible that libjava clobbers
dlerror() by trying (and failing) to load other libraries.
At any rate, Joe confirmed that this patch addresses the issue.
Fixes#462.
Fixes a lifecycle issue where the req got created, added to the list of active
reqs but wasn't properly activated because uv__connect() returned early.
produces better error message from test-dgram-multicast-multi-process
when run w/o network.
before:
=== release test-dgram-multicast-multi-process ===
Path: simple/test-dgram-multicast-multi-process
dgram.js:287
throw new errnoException(errno, 'addMembership');
^
Error: addMembership Unknown system errno 19
at new errnoException (dgram.js:356:11)
at Socket.addMembership (dgram.js:287:11)
at Object.<anonymous> (/home/roman/wc/node/test/simple/test-dgram-multicast-multi-process.js:224:16)
at Module._compile (module.js:449:26)
at Object.Module._extensions..js (module.js:467:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.runMain (module.js:487:10)
at process.startup.processNextTick.process._tickCallback (node.js:244:9)
[PARENT] Worker 9223 died. 1 dead of 3
dgram.js:287
throw new errnoException(errno, 'addMembership');
^
Error: addMembership Unknown system errno 19
at new errnoException (dgram.js:356:11)
at Socket.addMembership (dgram.js:287:11)
at Object.<anonymous> (/home/roman/wc/node/test/simple/test-dgram-multicast-multi-process.js:224:16)
at Module._compile (module.js:449:26)
at Object.Module._extensions..js (module.js:467:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.runMain (module.js:487:10)
at process.startup.processNextTick.process._tickCallback (node.js:244:9)
[PARENT] sent 'First message to send' to 224.0.0.114:12346
dgram.js:287
[PARENT] sent 'Second message to send' to 224.0.0.114:12346
throw new errnoException(errno, 'addMembership');
[PARENT] sent 'Third message to send' to 224.0.0.114:12346
^
[PARENT] sendSocket closed
[PARENT] Worker 9224 died. 2 dead of 3
Error: addMembership Unknown system errno 19
at new errnoException (dgram.js:356:11)
at Socket.addMembership (dgram.js:287:11)
at Object.<anonymous> (/home/roman/wc/node/test/simple/test-dgram-multicast-multi-process.js:224:16)
at Module._compile (module.js:449:26)
at Object.Module._extensions..js (module.js:467:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.runMain (module.js:487:10)
at process.startup.processNextTick.process._tickCallback (node.js:244:9)
[PARENT] Worker 9225 died. 3 dead of 3
[PARENT] All workers have died.
[PARENT] Fail
Command: out/Release/node /home/roman/wc/node/test/simple/test-dgram-multicast-multi-process.js
after:
=== release test-dgram-multicast-multi-process ===
Path: simple/test-dgram-multicast-multi-process
dgram.js:287
throw new errnoException(errno, 'addMembership');
^
Error: addMembership ENODEV
at new errnoException (dgram.js:356:11)
at Socket.addMembership (dgram.js:287:11)
at Object.<anonymous> (/home/roman/wc/node/test/simple/test-dgram-multicast-multi-process.js:224:16)
at Module._compile (module.js:449:26)
at Object.Module._extensions..js (module.js:467:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.runMain (module.js:487:10)
at process.startup.processNextTick.process._tickCallback (node.js:244:9)
[PARENT] Worker 13141 died. 1 dead of 3
dgram.js:287
throw new errnoException(errno, 'addMembership');
^
[PARENT] sent 'First message to send' to 224.0.0.114:12346
[PARENT] sent 'Second message to send' to 224.0.0.114:12346
[PARENT] sent 'Third message to send' to 224.0.0.114:12346
[PARENT] sent 'Fourth message to send' to 224.0.0.114:12346
[PARENT] sendSocket closed
dgram.js:287
throw new errnoException(errno, 'addMembership');
^
Error: addMembership ENODEV
at new errnoException (dgram.js:356:11)
at Socket.addMembership (dgram.js:287:11)
at Object.<anonymous> (/home/roman/wc/node/test/simple/test-dgram-multicast-multi-process.js:224:16)
at Module._compile (module.js:449:26)
at Object.Module._extensions..js (module.js:467:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.runMain (module.js:487:10)
at process.startup.processNextTick.process._tickCallback (node.js:244:9)
[PARENT] Worker 13142 died. 2 dead of 3
Error: addMembership ENODEV
at new errnoException (dgram.js:356:11)
at Socket.addMembership (dgram.js:287:11)
at Object.<anonymous> (/home/roman/wc/node/test/simple/test-dgram-multicast-multi-process.js:224:16)
at Module._compile (module.js:449:26)
at Object.Module._extensions..js (module.js:467:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.runMain (module.js:487:10)
at process.startup.processNextTick.process._tickCallback (node.js:244:9)
[PARENT] Worker 13143 died. 3 dead of 3
[PARENT] All workers have died.
[PARENT] Fail
Command: out/Release/node /home/roman/wc/node/test/simple/test-dgram-multicast-multi-process.js
Failed tests would leave behind extra files, and some tests weren't cleaning up
properly in the first place - this adds a cleanup_watch_dir() helper method to
make all the fs-event tests more consistent.
Newer versions of gyp do not support files with the same basenames (example:
core.c and linux/core.c).
The nominal reason is consistency across build systems. Apparently, msbuild
doesn't support it either.
Somewhere, someplace, baby Jesus cries sad little tears...
Fixes#464.
