The maximum number of times timers should run when uv_run() is called
with UV_RUN_ONCE and UV_RUN_NOWAIT is 1. Do that by conditionally
calling timers before entering the while loop when called with
UV_RUN_DEFAULT.
The reason to always run timers at the end of the while loop, instead of
at the beginning, is to help enforce the conceptual event loop model.
Which starts when entering the event provider (e.g. calling poll).
Other than only allowing timers to be processed once per uv_run()
execution, the only other noticeable change this will show is if all the
following are true:
* uv_run() is called with UV_RUN_NOWAIT or UV_RUN_ONCE.
* An event is waiting to be received when poll is called.
* Execution time between the call to uv_timer_start() and entering the
while loop is longer than the timeout.
If all these are true, then timers that would have executed before
entering the event provider will now be executed afterward.
Fixes: https://github.com/libuv/libuv/issues/3686
Co-authored-by: Momtchil Momtchev <momtchil@momtchev.com>
Pass the loop to MAKE_VALGRIND_HAPPY() so it's explicit on which loop
needs to be cleaned up. Since it asserts on uv_loop_close(), need to
remove a couple of those that were being done before the call.
Cleanup where loop was assigned, so the entire test either uses loop or
uv_default_loop(). Not both.
Also take care of any reqs that may have been left uncleaned.
This code would previously get confused between rounds of the barrier
being called and a thread might incorrectly get stuck (deadlock) if the
next round started before that thread had exited the current round.
Avoid that by not starting the next round in++ before out-- has reached
zero indicating that all threads have left the prior round.
And fix it that on Windows by replacing the implementation with the one
from unix. There are some awkward platform-specific redirection here
with an extra malloc that is not needed on Win32, but that will be fixed
in libuv v2.
Fixes: https://github.com/libuv/libuv/issue/3872
The call to uv__cwd() always returns a new allocation. The previously
allocated utf16_buffer needs to be free'd before passing it in to
receive the next allocation.
ThreadSanitizer complains about unsynchronized access to the
handle->loop->cf_state pointer.
The warning is probably benign but the fsevents thread already knows
the pointer. It doesn't have to read it, it just needs to propagate it.
Refs: https://github.com/libuv/libuv/issues/3880
The conditional bind-to-port logic in tcp.c had an error path that
closed the socket file descriptor while it was still owned by the
uv_tcp_t handle.
Fix that by not closing the file descriptor and refactoring the code so
it is hopefully harder to get wrong in the future.
The refactoring also makes the code a little flatter, removes duplicated
code, and, arguably, is in a more idiomatic libuv style.
Fixes: https://github.com/libuv/libuv/issues/3461
Replaces: https://github.com/libuv/libuv/pull/3462
Co-authored-by: Ben Noordhuis <info@bnoordhuis.nl>
Remove expectations around uv_cond_timedwait() maximum sleep time.
The OpenBSD buildbot sleeps more than 5x longer than requested. It no
longer makes sense to expect some reasonable upper bound because at that
point we've moved well beyond reasonable.
Fixes: https://github.com/libuv/libuv/issues/3896
Since we are emulating this event, but are not using the pending_queue,
we need to make sure it is accounted for properly. Also DRY some of the
reset_timeout code here.
This was observed to cause a hang in certain rare cases, particularly on
M1 machines.
Do a bit of code cleanup too, since we do not need to initialize the
internal signal handling pipe if it will not be used.
When run under distcheck, the libuv source permissions are read-only,
which makes this test copyfile fail without explicit correction to the
permissions.
ThreadSanitizer's complaints about data races are likely legitimate but
they are pre-existing and not straightforward to fix with the current
design. Something for later.
Refs: https://github.com/libuv/libuv/issues/3681
Legitimate if fairly benign warning: the `stop` global variable was
read and written without proper synchronization; `volatile` isn't
sufficient.
Refs: https://github.com/libuv/libuv/issues/3681
The current fix (libuv#2231) was found to be slow in certain cases. This
change should improve scalabaility a bit by only incurring the spin loop
delay while closing an UV_ASYNC. It also is intended to slightly improve
the behavior after uv_loop_close is called, by parking all of the
pending flags as set, so that it will not access the loop at all (until
the uv_async_t memory is freed, which we leave still to the
responsibility of the user).
Note that this bug appears to still exist on Win32, though it's harder
to address without the refactoring done to this code on libuv master.
Takes some inspiration from https://github.com/libuv/libuv/pull/2654
Takes some inspiration from https://github.com/libuv/libuv/pull/2656
Refs: https://github.com/libuv/libuv/pull/2231
```
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
note: in expansion of macro 'ASSERT_BASE'
#define ASSERT_EQ(a, b) ASSERT_BASE(a, ==, b, int64_t, PRId64)
warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but
argument 3 has type ‘uint32_t’ {aka ‘unsigned int’}
```
Co-authored-by: Jameson Nash <vtjnash@gmail.com>
GitHub gets confused by the non-standard format of the LICENSE file.
Move the extra bits into the creatively named LICENSE-extra file.
Fixes: https://github.com/libuv/libuv/issues/3875
File system operations may return uid and gid values, which we may want
to pretty-print. We already have the code for getting information for
the current user, so just need to add a parameter to make it exposed for
every user. We expose information about groups in a similar manner also.
In Node.js, fs.readlink() on a non-symlink file used to throw an UNKNOWN
error on Windows. This change maps ERROR_NOT_A_REPARSE_POINT to
UV_EINVAL, so that now it throws EINVAL just like other platforms.
This is handled explicitly in `fs__readlink`, since elsewhere it might
map to EPERM instead (such as in `link`).
On Linux, CPUs can come online or go offline while uv_cpu_info() is busy
gathering data. Change uv_cpu_info() in the following ways:
1. Learn online CPUs from /proc/stat
2. Get the model name from /proc/cpuinfo when it has a matching CPU,
or default to "unknown"
3. Get speed from /sys/devices/system/cpu/cpu%u/cpufreq/scaling_cur_freq
when it exists, or default to 0
Before this commit, libuv read the speed from /proc/cpuinfo but that
reports the base frequency, not the actual frequency. My system has
two cores running permanently at 3.6 GHz but libuv thought all 12 ran
at 2.2 GHz.
Fixes: https://github.com/libuv/libuv/issues/2351
Fixes: https://github.com/libuv/libuv/issues/3858
Increase the timer interval. That hopefully ameliorates the problem of
FSEvents.framework missing events on the macOS CI buildbot.
Not really a fix, more a mitigation.
Fixes: https://github.com/libuv/libuv/issues/3862
