PTHREAD_STACK_MIN is an optional part of the POSIX spec and
NetBSD deliberately does not implement it as it's a variable
value in runtime.
PR-URL: https://github.com/libuv/libuv/pull/2252
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
close() is interruptible, meaning that a signal delivered when the
close() system call is executing, can result in a return value of
-1 with errno set to EINTR or EINPROGRESS. A survey of supported
Unices suggests the file descriptor is in fact closed and so there
is nothing to do except ignore the error.
Libuv already handled it correctly for internal file descriptors
throug uv__close() and uv__close_nocheckstdio() but uv_fs_close()
did not until now.
PR-URL: https://github.com/libuv/libuv/pull/2236
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
PR-URL: https://github.com/libuv/libuv/pull/2224
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Yury Selivanov <yury@magic.io>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This undoes the changes commit 5234b1c4 ("build,sunos: better handling
of non-GCC compiler") makes to configure.ac and Makefile.am because they
break the build on the centos6 buildbots with the following error:
# <snip>
checking for _FILE_OFFSET_BITS value needed for large files... no
./configure: line 12957: syntax error near unexpected token `;'
./configure: line 12957: `; then'
Build step 'Execute shell' marked build as failure
Refs: https://github.com/libuv/libuv/pull/2200
PR-URL: https://github.com/libuv/libuv/pull/2234
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Add test to test-fs-copyfile.c to check that uv_fs_copyfile() respects
destination file permissions. Previously, in macOS, it did not.
PR-URL: https://github.com/libuv/libuv/pull/2233
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Using copyfile(3) on macOS apparently results in situations where file
permissions are ignored. Using the same code for other UNIX-like
operating systems seems to fix the issue.
Refs: https://github.com/nodejs/node/issues/26936#issuecomment-476992597
PR-URL: https://github.com/libuv/libuv/pull/2233
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
The memset() in the inner loop clears previously copied phys_addrs. As a
result, every interface is reported to have a phys_addr of
00:00:00:00:00:00, except the last one. This bug only manifests on
systems with multiple interfaces.
PR-URL: https://github.com/libuv/libuv/pull/2153
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
PR-URL: https://github.com/libuv/libuv/pull/2221
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Using `floor()` instead of integer division causes the test driver
to require linking against `libm` on Solaris.
PR-URL: https://github.com/libuv/libuv/pull/2200
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The return type is changed to avoid having to craft an artificial
`return` just for the Studio compiler.
PR-URL: https://github.com/libuv/libuv/pull/2200
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The Studio compiler issues a warning because the source file lacks a
newline at the end of the file.
PR-URL: https://github.com/libuv/libuv/pull/2200
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The `atomic_cas_uint` and `atomic_cas_ulong` functions expect `uint_t`
and `ulong_t` parameters, respectively, so cast the `int`/`long` inputs
to avoid loud compiler warnings.
PR-URL: https://github.com/libuv/libuv/pull/2200
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The Studio C compiler issues a warning if there is a `return` after an
`abort()` call or an unreachable `return` after a prior `return`.
The Studio C compiler issues a warning if there is a `return` after a
prior `return`, or an endless loop (e.g., `for (;;)`) with a `return` at
the end of the function.
PR-URL: https://github.com/libuv/libuv/pull/2200
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
`AC_PROG_CC` sets the `GCC` shell variable, which is supposed to be
used to enable GCC-specific options. A `GCC` check is added to only
pass the pre-existing GCC-specific options when using GCC.
The `GCC` variable is passed as an `AM_CONDITIONAL` and is used in
`Makefile.am` is used to address the following:
- Only pass `-pthreads` on `SUNOS` when using GCC
- Only use `-Wno-long-long` when using GCC
With the above changes, the Solaris build is now fixed when using the
native Studio compiler along with the minor adjustments:
- Always pass `-D_REENTRANT` to get thread-safe `errno`
PR-URL: https://github.com/libuv/libuv/pull/2200
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Solaris does not support the non-standard Linux `POLLRDHUP` event, so
disable the code awaiting the disconnects to exit the loop. Without
this, the `poll_duplex` and `poll_unidirectional` tests will hang and
timeout.
PR-URL: https://github.com/libuv/libuv/pull/2200
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
There are three `abort()` calls within the I/O subsystem related to
Solaris ports (`port_associate()`, `port_dissociate()`, and
`port_getn()`). To simplify debugging issues where the kernel is
setting `errno` and returning failure, call `perror()` to see the
`errno` value cause of the failure.
PR-URL: https://github.com/libuv/libuv/pull/2200
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Commit baa81465a ("build: add compile for android arm64/x86/x86-64")
introduced a number of new android-configure scripts but didn't add
them to EXTRA_DIST in Makefile.am, causing `make dist` to fail.
This commit also removes checkspare.sh from EXTRA_DIST. I broke that
in commit a7a16219d ("unix: remove checksparse.sh") from last June.
Mea culpa!
Fixes: https://github.com/libuv/libuv/issues/2190
PR-URL: https://github.com/libuv/libuv/pull/2198
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit fixes a linker error when building tests
via cmake on Windows by adding the proper
USING_UV_SHARED=1 define when linking to the shared
libuv.
Fixes: https://github.com/libuv/libuv/issues/2188
PR-URL: https://github.com/libuv/libuv/pull/2187
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Add two new methods:
`uv_udp_connect()` to connect / disconnect an UDP handle.
`uv_udp_getpeername()` to get the remote peer address of a connected UDP
handle.
Modify `uv_udp_send()` and `uv_udp_try_send()` to accept a `NULL` `addr`
to send messages over an "UDP connection".
Refs: https://github.com/libuv/leps/pull/10
PR-URL: https://github.com/libuv/libuv/pull/1872
Backport-PR-URL: https://github.com/libuv/libuv/pull/2217
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
uv_winsock_init calls abort() if socket operation failed, which means
all libuv-based applications are not able to start in safe mode
without network.
PR-URL: https://github.com/libuv/libuv/pull/2205
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Close the watched file's file descriptor when initialization fails due
to out-of-memory conditions.
PR-URL: https://github.com/libuv/libuv/pull/2197
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
The license file is installed twice. Once where it should be installed
and the second time into the pkg-config directory. Among other files
from other projects it might be confusing why there is a license file
among with other files. Additionally, that is normally not the right
location for license files. Guess, that is only a copy/pasting mistake.
PR-URL: https://github.com/libuv/libuv/pull/2204
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Expecting `uv_sleep(45)` to wake up within 80 ms is not a reasonable
assumption: the operating system may not reschedule the process within
that time frame when the system is overloaded.
The test fails intermittently on our own CI and packagers have reported
similar failures.
Fixes: https://github.com/libuv/libuv/issues/2117
PR-URL: https://github.com/libuv/libuv/pull/2186
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
As some calls in some platforms require.
PR-URL: https://github.com/libuv/libuv/pull/2189
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Kernels > 4.11 support the statx() system call that lets one retrieve
the birth time of a file. Teach libuv about it.
Fixes: https://github.com/libuv/libuv/issues/2152
PR-URL: https://github.com/libuv/libuv/pull/2184
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Add a missing check in uv__io_close() where it called
uv__platform_invalidate_fd() without checking that the
watcher actually has a valid file descriptor assigned.
Fixes: https://github.com/libuv/libuv/issues/2181
PR-URL: https://github.com/libuv/libuv/pull/2182
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
