This issue manifested on `connected` udp sockets trying to send
datagrams to a non-existent server and returning `ECONNREFUSED` because
an ICMP error was received before the actual sending was performed.
PR-URL: https://github.com/libuv/libuv/pull/2899
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
It was reported that mach_absolute_time() can jump backward in time when
the machine is suspended. Use mach_continuous_time() when available to
work around that (macOS 10.12 and up.)
Fixes: https://github.com/libuv/libuv/issues/2891
PR-URL: https://github.com/libuv/libuv/pull/2894
Reviewed-By: Phil Willoughby <philwill@fb.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
`__atomic_load_n()` and friends were added in gcc 4.7.0 but we still
have some centos6 machines with a vintage gcc 4.4.7 from 2012 in the
CI matrix.
PR-URL: https://github.com/libuv/libuv/pull/2888
Refs: https://github.com/libuv/libuv/pull/2886
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
It was reported that the addition of that file without adding an
exception to m4/.gitignore breaks the tarball autotools build because
the file isn't distributed.
Fixes: https://github.com/libuv/libuv/issues/2862
PR-URL: https://github.com/libuv/libuv/pull/2885
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Make ThreadSanitizer stop complaining about the static variables that
libuv uses to record the presence (or lack) of system calls and other
kernel features.
Fixes: https://github.com/libuv/libuv/issues/2884
PR-URL: https://github.com/libuv/libuv/pull/2886
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jameson Nash <vtjnash@gmail.com>
The variable uv__read_console_status is left as IN_PROGRESS when the
operation is canceled ahead of time by the main thread requesting a
trap (race condition?).
This confuses the next call to uv__cancel_read_console(...) causing
a deadlock due to a semaphore acquisition that is never released by
the reading thread.
Setting the status variable back to COMPLETE or NOT_STARTED fixes
the issue.
Ref: https://github.com/nodejs/node/issues/32999
PR-URL: https://github.com/libuv/libuv/pull/2882
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
It was reported that uv_loadavg() reports the wrong values inside an
lxc container.
Libuv calls sysinfo(2) but that isn't intercepted by lxc. /proc/loadavg
however is because /proc is a FUSE fs inside the container.
This commit makes libuv try /proc/loadavg first and fall back to
sysinfo(2) in case /proc isn't mounted.
This commit is very similar to commit 3a1be725 ("linux: read free/total
memory from /proc/meminfo") from April 2019.
Fixes: https://github.com/nodejs/node/issues/33791
PR-URL: https://github.com/libuv/libuv/pull/2876
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Move common logic into a separate function that will be reused in a
follow-up commit. This commit also adds a minor correctness fix in
that the `read(2)` system call is now retried on `EINTR`.
PR-URL: https://github.com/libuv/libuv/pull/2876
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
This test was consistently timing out on macOS. Some printf()
debugging on the CI showed that the test was still making forward
progress, but legitimately timed out. This commit bumps the test
timeout to a value that should provide much more than enough time.
Fixes: https://github.com/libuv/libuv/issues/2775
PR-URL: https://github.com/libuv/libuv/pull/2865
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
The QEMU CI broke recently. The calculation to determine the QEMU
version to install now returns multiple versions. This commit
updates the logic to only take the last result (which I think will
be the newest matching version).
PR-URL: https://github.com/libuv/libuv/pull/2864
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This commit runs the test suite via QEMU on GitHub Actions on
a variety of platforms.
Fixes: https://github.com/libuv/libuv/issues/2842
PR-URL: https://github.com/libuv/libuv/pull/2846
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Previously libuv was tested under the user class QSECOFR on IBM i.
But most IBM i users does not have that authority.
Refine some assertions to support common user profiles on IBM i.
Fixes: https://github.com/libuv/libuv/issues/2851
PR-URL: https://github.com/libuv/libuv/pull/2852
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
It was reported that `getrlimit(RLIMIT_STACK)` fails on some aarch64
systems due to a glibc bug, where the getrlimit() system call wrapper
invokes the wrong system call.
Libuv could work around that by issuing a `prlimit(2)` system call
instead but since it can't assume that said system call is available
(it was added in Linux 2.6.36, libuv's baseline is 2.6.32) it seems
easier to just use the default 2M stack size when the call fails.
Fixes: https://github.com/nodejs/node/issues/33244
Refs: https://bugzilla.redhat.com/show_bug.cgi?id=1813089
PR-URL: https://github.com/libuv/libuv/pull/2848
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jiawen Geng <technicalcute@gmail.com>
Using AC_CHECK_LIB ignores symbols already provided by
other libraries, or in other words it links libuv against
libraries that it does not need.
Attempts to remove specific libraries were met with arguments
that older libc versions would still require them.[0]
Fix this by using AC_SEARCH_LIBS instead of AC_CHECK_LIB while
using AX_PTHREAD for POSIX threads.
[0] E.g. https://github.com/libuv/libuv/pull/2493
PR-URL: https://github.com/libuv/libuv/pull/2823
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Libuv was copying `sizeof(struct sockaddr_storage)` bytes from source to
destination but the source was only `sizeof(struct sockaddr_in6)` bytes
big, or approximately 128 vs. 16 bytes.
Fixes: https://github.com/libuv/libuv/issues/2840
PR-URL: https://github.com/libuv/libuv/pull/2841
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Replace two biggish `struct sockaddr_storage` instances with a union
of `struct sockaddr_in` and `struct sockaddr_in6`, the latter being
the largest that function supports.
PR-URL: https://github.com/libuv/libuv/pull/2841
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
`uv_signal_init()` leads to the allocation of an IO watcher,
so if the loop initialization fails at a later point,
the `loop->watchers` list needs to be released.
PR-URL: https://github.com/libuv/libuv/pull/2837
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Exposes the original system error of the filesystem syscalls. Adds a new
uv_fs_get_system_error which returns orignal errno on Linux or
GetLastError on Windows.
Ref: https://github.com/libuv/libuv/issues/2348
PR-URL: https://github.com/libuv/libuv/pull/2810
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
I was getting some weird results when copying a 5GB file on Alpine
Linux on Raspberry Pi. Out of the 5GB only 1.1GB would get copied and
the process would finish without an error. After some digging I found
out that there's a problem that some data types have smaller number of
bytes on Alpine Linux on Raspberry Pi than on other platforms
apparently.
When getting the size of the file in bytes, stat holds the size in
off_t data type, like this:
struct stat {
...
off_t st_size; /* total size, in bytes */
...
};
In my case, off_t has 8 bytes which is enough to hold a value up to
some exabytes. The problem is that it gets assigned to bytes_to_send
variable, which is size_t. In my case, size_t is only 4 bytes, which
is only good for about 4GB. If the file is any larger, there's an
overflow when assigning it from stat to bytes_to_send. That's easy
to fix, I just changed the data type of bytes_to_send to off_t.
However there's more.
The other 2 variables - in_offset and bytes_written also have to be
able to hold the size of the entire file, therefore it makes sense to
change them to off_t as well.
The last problem is that bytes_to_send is passed down to
uv_fs_sendfile() which converts it to size_t again. I could go and
change the types everywhere across the whole codebase to off_t but
that could break other things, so it seams a bit too much. A much
better solution is to have a proxy variable bytes_chunk that is
size_t type and copy as much bytes as possible at a time that can
fit into size_t. That way it will work the same as before on other
platforms, where size_t is more than 4 bytes.
PR-URL: https://github.com/libuv/libuv/pull/2758
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Commit 3d713663 ("freebsd,linux: add recvmmsg() + sendmmsg() udp
implementation") forgot to zero some of the members of the msghdr
struct. It seems to work by accident, not by design.
PR-URL: https://github.com/libuv/libuv/pull/2819
Refs: https://github.com/libuv/libuv/pull/2818
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
The Windows documentation states these should not be possible
but several people have reported that they do in fact happen.
Try with a smallish stack-allocated buffer first and switch to
a heap-allocated buffer if the first one is too small.
Fixes: https://github.com/libuv/libuv/issues/2587
PR-URL: https://github.com/libuv/libuv/pull/2589
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Make the documentation reflect that the init/start/stop functions
for check/idle/prepare handles always succeed.
PR-URL: https://github.com/libuv/libuv/pull/2803
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Adds manifest file that makes the test runner work with long filenames
when those are enabled in the system.
PR-URL: https://github.com/libuv/libuv/pull/2789
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Since Windows 10 1607 some WinApi functions no longer have a MAX_PATH
limit on the filenames length. This removes this hard-coded path length
limit from various places in libuv, switching to dynamically allocating
string buffers.
Fixes: https://github.com/libuv/libuv/issues/2331
PR-URL: https://github.com/libuv/libuv/pull/2788
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Commit 5736658b ("udp: add flag to enable recvmmsg(2) explicitly") added
the flag but didn't update the validation logic in src/win/udp.c.
This commit moves the validation logic to src/uv-common.c. The flag is
now accepted as a no-op on Windows.
Fixes: https://github.com/libuv/libuv/issues/2806
PR-URL: https://github.com/libuv/libuv/pull/2809
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Removes warnings W4100, W4127, W4201, W4206, W4210, W4232, W4456, W4457,
W4459, W4706 and W4996 when building with MSVC.
PR-URL: https://github.com/libuv/libuv/pull/2777
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This was causing a warning during the documentation build.
PR-URL: https://github.com/libuv/libuv/pull/2797
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This seems to be the case from reading the code of uv_cancel().
Also fixes a broken link due to a markup typo.
PR-URL: https://github.com/libuv/libuv/pull/2797
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/libuv/libuv/pull/2798
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Richard Lau <riclau@uk.ibm.com>
Libuv already works without that API since commit 153ea114ff but still
had it as a hard requirement in the import table. This code uses the
`pGetQueuedCompletionStatusEx` function pointer instead, hence it also
works on systems that don't export `GetQueuedCompletionStatusEx`.
This simple fix improves compatibility of libuv with ReactOS and
Windows XP (latter using Vista+ compatibility libraries like
https://github.com/MyTDT-Mysoft/DllCompat)
PR-URL: https://github.com/libuv/libuv/pull/2800
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
