The variable `conn->httpversion` was used for several purposes and it
was unclear at which time the value represents what.
- rename `conn->httpversion` to `conn->httpversion_seen`
This makes clear that the variable only records the last
HTTP version seen on the connection - if any. And that it
no longer is an indication of what version to use.
- Change Alt-Svc handling to no longer modify `conn->httpversion`
but set `data->state.httpwant` for influencing the HTTP version
to use on a transfer.
- Add `data->req.httpversion_sent` to have a record of what
HTTP version was sent in a request
- Add connection filter type CF_TYPE_HTTP
- Add filter query `CF_QUERY_HTTP_VERSION` to ask what HTTP
filter version is in place
- Lookup filters HTTP version instead of using `conn->httpversion`
Test test_12_05 now switches to HTTP/1.1 correctly and the
expectations have been fixed.
Removed the connection fitler "is_httpN()" checks and using
the version query instead.
Closes#16073
lib : remove all hyper code
configure: stop detecting hyper
docs: no more mention of hyper
tests: mo more special-handling of hyper builds
CI: no jobs using hyper
Closes#15120
When ending an FTP upload, we shut down the connection gracefully, since
the server should be notified we had send all bytes. Mostly, this is a
NOP without TLS involved. With TLS, close-notify messages should be
exchanged.
As reported in #14843, not all servers seem to do that. Since it is the
server's responsiblity to check it has received everything, we just log
the timeout and proceed as if everything is fine.
In the receive direction, we still fail the transfer if the server does
not shut down its direction properly.
Fixes#14843
Reported-by: Rasmus Melchior Jacobsen
Closes#14848
When uploading data from stdin ('-T -'), and the EOS was only detected
on a 0-length read, the EOS was not forwarded to the filters. This led
HTTP/2 to hang on not forwarding this to the server.
Added test_07_14 to reproduce and verify.
Fixes#14870
Reported-by: nekopsykose on github
Closes#14877
`data->id` is unique in *most* situations, but not in all. If a libcurl
application uses more than one connection cache, they will overlap. This
is a rare situations, but libcurl apps do crazy things. However, for
informative things, like tracing, `data->id` is superior, since it
assigns new ids in curl's serial curl_easy_perform() use.
Introduce `data->mid` which is a unique identifer inside one multi
instance, assigned on multi_add_handle() and cleared on
multi_remove_handle().
Use the `mid` in DoH operations and also in h2/h3 stream hashes.
Reported-by: 罗朝辉
Fixes#14414Closes#14499
- rely on the new flush to handle blocked sends. No longer
do simulated EAGAIN on (partially) blocked sends with their
need to handle repeats.
- fix some debug handling CURL_SMALLREQSEND env var
- add some assertings in request.c for affirming we do it right
- enhance assertion output in test_16 for easier analysis
Closes#14435
Since data can be held in connection filter buffers when sending gives
EAGAIN, add methods to query this and perform flushing of those buffers.
The transfer loop will continue sending until all upload data is
processed and the connection is flushed.
- add `CF_QUERY_SEND_PENDING` to query filters
- add `CF_CTRL_DATA_SEND_FLUSH` to flush filters
- change `Curl_req_want_send()` to query the connection
if it needs flushing
- use `Curl_req_want_send()` to determine the POLLOUT
in the PERFORMING multi state
- implement flush handling in the HTTP/2 connection filter
Closes#14271
Adds a `bool eos` flag to send methods to indicate that the data
is the last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers
are not yet fully flushed.
Closes#14220
Adds a `bool eos` flag to send methods to indicate that the data is the
last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers are
not yet fully flushed.
Closes#14220
When removing an easy handle that had DoH sub-easy handles going, those
were not removed from the multi handle. Their memory was reclaimed on
curl_easy_cleanup() of the owning handle, but multi still had them in
their list.
Add `Curl_doh_close()` and `Curl_doh_cleanup()` as common point for
handling the DoH resource management. Use the `multi` present in the doh
handles (if so), for removal, as the `data->multi` might already have
been NULLed at this time.
Reported-by: 罗朝辉
Fixes#14207Closes#14212
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
- clarify Curl_xfer_setup() with RECV/SEND flags and different calls for
which socket they operate on. Add a shutdown flag for secondary
sockets
- change Curl_xfer_setup() calls to new functions
- implement non-blocking connection shutdown at the end of receiving or
sending a transfer
Closes#13913
`CURLDEBUG` is meant to enable memory tracking, but in a bunch of cases,
it was protecting debug features that were supposed to be guarded with
`DEBUGBUILD`.
Replace these uses with `DEBUGBUILD`.
This leaves `CURLDEBUG` uses solely for its intended purpose: to enable
the memory tracking debug feature.
Also:
- autotools: rely on `DEBUGBUILD` to enable `checksrc`.
Instead of `CURLDEBUG`, which worked in most cases because debug
builds enable `CURLDEBUG` by default, but it's not accurate.
- include `lib/easyif.h` instead of keeping a copy of a declaration.
- add CI test jobs for the build issues discovered.
Ref: https://github.com/curl/curl/pull/13694#issuecomment-2120311894Closes#13718
A transfer with a completed download that is still uploading needs to
check the connection state when it is PAUSEd, since connection
close/errors would otherwise go unnoticed.
Reported-by: Sergey Bronnikov
Fixes#13260Closes#13271
Saving some cpu cycles in http response header processing:
- pass the length of the header line along
- use string constant sizeof() instead of strlen()
- check line length if prefix is possible
- switch on first header char to limit checks
Closes#13143
Move all handling of HTTP's `Expect: 100-continue` feature into a client
reader. Add sending flag `KEEP_SEND_TIMED` that triggers transfer
sending on general events like a timer.
HTTP installs a `CURL_CR_PROTOCOL` reader when announcing `Expect:
100-continue`. That reader works as follows:
- on first invocation, records time, starts the `EXPIRE_100_TIMEOUT`
timer, disables `KEEP_SEND`, enables `KEEP_SEND_TIMER` and returns 0,
eos=FALSE like a paused upload.
- on subsequent invocation it checks if the timer has expired. If so, it
enables `KEEP_SEND` and switches to passing through reads to the
underlying readers.
Transfer handling's `readwrite()` will be invoked when a timer expires
(like `EXPIRE_100_TIMEOUT`) or when data from the server arrives. Seeing
`KEEP_SEND_TIMER`, it will try to upload more data, which triggers
reading from the client readers again. Which then may lead to a new
pausing or cause the upload to start.
Flags and timestamps connected to this have been moved from
`SingleRequest` into the reader's context.
Closes#13110
A transfer may do several `SingleRequest`s for its success. This happens
regularly for authentication, follows and retries on failed connections.
The "readwrite()" calls and functions connected to those carried a `bool
*done` parameter to indicate that the current `SingleRequest` is over.
This may happen before `upload_done` or `download_done` bits of
`SingleRequest` are set.
The problem with that is now `write_resp()` protocol handlers are
invoked in places where the `bool *done` cannot be passed up to the
caller. Instead of being a bool in the call chain, it needs to become a
member of `SingleRequest`, reflecting its state.
This removes the `bool *done` parameter and adds the `done` bit to
`SingleRequest` instead. It adds `Curl_req_soft_reset()` for using a
`SingleRequest` in a follow up, clearing `done` and other
flags/counters.
Closes#13096
Add `mime` client reader. Encapsulates reading from mime parts, getting
their length, rewinding and unpausing.
- remove special mime handling from sendf.c and easy.c
- add general "unpause" method to client readers
- use new reader in http/imap/smtp
- make some mime functions static that are now only used internally
In addition:
- remove flag 'forbidchunk' as no longer needed
Closes#13039
- update client reader documentation
- client reader, add rewind capabilities
- tell creader to rewind on next start
- Curl_client_reset() will keep reader for future rewind if requested
- add Curl_client_cleanup() for freeing all resources independent of
rewinds
- add Curl_client_start() to trigger rewinds
- move rewind code from multi.c to sendf.c and make part of
"cr-in"'s implementation
- http, move the "resume_from" handling into the client readers
- the setup of a HTTP request is reshuffled to follow:
* determine method, target, auth negotiation
* install the client reader(s) for the request, including crlf
conversions and "chunked" encoding
* apply ranges to client reader
* concat request headers, upgrades, cookies, etc.
* complete request by determining Content-Length of installed
readers in combination with method
* send
- add methods for client readers to
* return the overall length they will generate (or -1 when unknown)
* return the amount of data on the CLIENT level, so that
expect-100 can decide if it want to apply itself
* set a "resume_from" offset or fail if unsupported
- struct HTTP has become largely empty now
- rename `Client_reader_*` to `Curl_creader_*`
Closes#13026
- Move all the "upload_done" handling to request.c
- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean
- removing data->state.ulbuf and data->req.upload_fromhere
- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer
- tftp, remove setting of data->req.upload_fromhere
- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway
- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition
- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending
- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf
Closes#13010
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk (to be made
into a sperate PR, also)
Added as documented [in
CLIENT-READER.md](5b1f31dfba/docs/CLIENT-READERS.md).
- old `Curl_buffer_send()` completely replaced by new `Curl_req_send()`
- old `Curl_fillreadbuffer()` replaced with `Curl_client_read()`
- HTTP chunked uploads are now formatted in a client reader added when
needed.
- FTP line-end conversions are done in a client reader added when
needed.
- when sending requests headers, remaining buffer space is filled with
body data for sending in "one go". This is independent of the request
body size. Resolves#12938 as now small and large requests have the
same code path.
Changes done to test cases:
- test513: now fails before sending request headers as this initial
"client read" triggers the setup fault. Behaves now the same as in
hyper build
- test547, test555, test1620: fix the length check in the lib code to
only fail for reads *smaller* than expected. This was a bug in the
test code that never triggered in the old implementation.
Closes#12969
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk
The method for sending not just raw bytes, but bytes that are either
"headers" or "body". The send abstraction stack, to to bottom, now is:
* `Curl_req_send()`: has parameter to indicate amount of header bytes,
buffers all data.
* `Curl_xfer_send()`: knows on which socket index to send, returns
amount of bytes sent.
* `Curl_conn_send()`: called with socket index, returns amount of bytes
sent.
In addition there is `Curl_req_flush()` for writing out all buffered
bytes.
`Curl_req_send()` is active for requests without body,
`Curl_buffer_send()` still being used for others. This is because the
special quirks need to be addressed in future parts:
* `expect-100` handling
* `Curl_fillreadbuffer()` needs to add directly to the new
`data->req.sendbuf`
* special body handlings, like `chunked` encodings and line end
conversions will be moved into something like a Client Reader.
In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`,
replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative
values as the returned `CURLcode` already specifies error conditions. This
allows easier handling of lengths without casting.
Closes#12964
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
