Extend the syntax of CURLOPT_RESOLVE strings: allow using a '+' prefix
(similar to the existing '-' prefix for removing entries) to add
DNS cache entries that will time out just like entries that are added
by libcurl itself.
Append " (non-permanent)" to info log message in case a non-permanent
entry is added.
Adjust relevant comments to reflect the new behavior.
Adjust documentation.
Extend unit1607 to test the new functionality.
Closes#6294
... as it makes the URL parser accept "very-long-hostname://" as a valid
host name and we don't want that. The parser now only accepts a blank
(no digits) after the colon if the URL starts with a scheme.
Reported-by: d4d on hackerone
Closes#6283
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
The cache content is not duplicated, like other caches, but the setting
and specified file name are.
Test 1908 is extended to verify this somewhat. Since the duplicated
handle gets the same file name, the test unfortunately overwrites the
same file twice (with different contents) which makes it hard to check
automatically.
Closes#5923
To reduce the amount of allocations needed for creating a Curl_addrinfo
struct, make a single larger malloc instead of three separate smaller
ones.
Closes#5533
GCC 10 warns about this with warning: implicit conversion
from 'SANITIZEcode' to 'CURLcode' [-Wenum-conversion]
Since 'expected_result' is not really of type 'CURLcode' and
it is not exposed in any way, we can just use 'SANITIZEcode'.
Reviewed-by: Daniel Stenberg
Reviewed-by: Marcel Raad
Closes#5476
Fixed the alt-svc parser to treat a newline as end of line.
The unit tests in test 1654 were done without CRLF and thus didn't quite
match the real world. Now they use CRLF as well.
Reported-by: Peter Wu
Assisted-by: Peter Wu
Assisted-by: Jay Satiro
Fixes#5445Closes#5446
- Stick to a single unified way to use structs
- Make checksrc complain on 'typedef struct {'
- Allow them in tests, public headers and examples
- Let MD4_CTX, MD5_CTX, and SHA256_CTX typedefs remain as they actually
typedef different types/structs depending on build conditions.
Closes#5338
* runtests.pl:
- Fix out-of-tree build under CMake when srcdir is not set. Default
srcdir to the location of runtests.pl.
- Add a hack to allow CMake to use the TFLAGS option as documented
in tests/README and used in scripts/travis/script.sh.
* Bump CMake version to 3.2 for USES_TERMINAL, dropping Debian Jessie
support (no one should care, it is already EOL.).
* Remove CTest since it defines its own 'test' target with no tests
since all unittests are already broken and not built by default.
* Add new test targets based on the options from Makefile.am. Since
new test targets are rarely added, I opted for duplicating the
runtests.pl options as opposed to creating a new Makefile.inc file.
Use top-level target names (test-x) instead of x-test since that is
used by CI and others.
Closes#5358
The default target should only build libcurl and curl. Add a dedicated
'testdeps' target which will be used later when running tests. Note that
unittests are currently broken in CMake and already excluded.
Closes#5368
A common set of functions instead of many separate implementations for
creating buffers that can grow when appending data to them. Existing
functionality has been ported over.
In my early basic testing, the total number of allocations seem at
roughly the same amount as before, possibly a few less.
See docs/DYNBUF.md for a description of the API.
Closes#5300
More connection cache accesses are protected by locks.
CONNCACHE_* is a beter prefix for the connection cache lock macros.
Curl_attach_connnection: now called as soon as there's a connection
struct available and before the connection is added to the connection
cache.
Curl_disconnect: now assumes that the connection is already removed from
the connection cache.
Ref: #4915Closes#5009
This fixes the error: 'for' loop initial declaration used outside C99
mode by declaring the loop increment variable in the beginning of the
block instead of inside the for loop.
Fixes#5254
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reported by the new script 'scripts/copyright.pl'. The script has a
regex whitelist for the files that don't need copyright headers.
Removed three (mostly usesless) README files from docs/
Closes#5141
- Disable warning C4127 "conditional expression is constant" globally
in curl_setup.h for when building with Microsoft's compiler.
This mainly affects building with the Visual Studio project files found
in the projects dir.
Prior to this change the cmake and winbuild build systems already
disabled 4127 globally for when building with Microsoft's compiler.
Also, 4127 was already disabled for all build systems in the limited
circumstance of the WHILE_FALSE macro which disabled the warning
specifically for while(0). This commit removes the WHILE_FALSE macro and
all other cruft in favor of disabling globally in curl_setup.
Background:
We have various macros that cause 0 or 1 to be evaluated, which would
cause warning C4127 in Visual Studio. For example this causes it:
#define Curl_resolver_asynch() 1
Full behavior is not clearly defined and inconsistent across versions.
However it is documented that since VS 2015 Update 3 Microsoft has
addressed this somewhat but not entirely, not warning on while(true) for
example.
Prior to this change some C4127 warnings occurred when I built with
Visual Studio using the generated projects in the projects dir.
Closes https://github.com/curl/curl/pull/4658
Improved estimation of expected_len and updated related comments;
increased strictness of QNAME-encoding, adding error detection for empty
labels and names longer than the overall limit; avoided treating DNAME
as unexpected;
updated unit test 1655 with more thorough set of proofs and tests
Closes#4598
Added unit test case 1655 to verify.
Close#4352
the code correctly finds the flaws in the old code,
if one temporarily restores doh.c to the old version.
This allows the function to figure out if a unix domain socket has a
file name or not associated with it! When a socket is created with
socketpair(), as done in the fuzzer testing, the path struct member is
uninitialized and must not be accessed.
Bug: https://crbug.com/oss-fuzz/16699Closes#4283
So that users can mask in/out specific HTTP versions when Alt-Svc is
used.
- Removed "h2c" and updated test case accordingly
- Changed how the altsvc struct is laid out
- Added ifdefs to make the unittest run even in a quiche-tree
Closes#4201
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes#3903
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
... to make the host name "usable". Store the scope id and put it back
when extracting a URL out of it.
Also makes curl_url_set() syntax check CURLUPART_HOST.
Fixes#3817Closes#3822
Make sure to run curl_global_cleanup() when shutting down the test
suite to release any resources allocated in the SSL setup. This is
clearly visible when running tests with PolarSSL where the thread
lock calloc() memory which isn't released when not running cleanup.
Below is an excerpt from the autobuild logs:
==12368== 96 bytes in 1 blocks are possibly lost in loss record 1 of 2
==12368== at 0x4837B65: calloc (vg_replace_malloc.c:752)
==12368== by 0x11A76E: curl_dbg_calloc (memdebug.c:205)
==12368== by 0x145CDF: Curl_polarsslthreadlock_thread_setup
(polarssl_threadlock.c:54)
==12368== by 0x145B37: Curl_polarssl_init (polarssl.c:865)
==12368== by 0x14129D: Curl_ssl_init (vtls.c:171)
==12368== by 0x118B4C: global_init (easy.c:158)
==12368== by 0x118BF5: curl_global_init (easy.c:221)
==12368== by 0x118D0B: curl_easy_init (easy.c:299)
==12368== by 0x114E96: test (lib1906.c:32)
==12368== by 0x115495: main (first.c:174)
Closes#3783
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes#3654
The stripcredentials unittest fails to compile on platforms without
xattr support, for example the Solaris member in the buildfarm which
fails with the following:
CC unit1621-unit1621.o
CC ../libtest/unit1621-first.o
CCLD unit1621
Undefined first referenced
symbol in file
stripcredentials unit1621-unit1621.o
goto problem 2
ld: fatal: symbol referencing errors. No output written to .libs/unit1621
collect2: error: ld returned 1 exit status
gmake[2]: *** [Makefile:996: unit1621] Error 1
Fix by excluding the test on such platforms by using the reverse
logic from where stripcredentials() is defined.
Closes#3759
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes#3442
The previous fix for parsing IPv6 URLs with a zone index was a paddle
short for URLs without an explicit port. This patch fixes that case
and adds a unit test case.
This bug was highlighted by issue #3408, and while it's not the full
fix for the problem there it is an isolated bug that should be fixed
regardless.
Closes#3411
Reported-by: GitYuanQu on github
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
A URL with a single colon without a portnumber should use the default
port, discarding the colon. Fix, add a testcase and also do little bit
of comment wordsmithing.
Closes#3365
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This adds a new unittest intended to cover the internal functions in
the urlapi code, starting with parse_port(). In order to avoid name
collisions in debug builds, parse_port() is renamed Curl_parse_port()
since it will be exported.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
- for "--netrc", don't ignore the login/password specified with "--user",
only ignore the login/password in the URL.
This restores the netrc behaviour of curl 7.61.1 and earlier.
- fix the documentation of CURL_NETRC_REQUIRED
- improve the detection of login/password changes when reading .netrc
- don't read .netrc if both login and password are already set
Fixes#3213Closes#3224
The previous coding used a format string whose output depended on the
current locale of the environment running the test. Since the gist of
the test is to have a format string, with the actual formatting being
less important, switch to a more stable formatstring with decimals.
Reported-by: Marcel Raad
Closes#3234
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
The internal buffer in infof() is limited to 2048 bytes of payload plus
an additional byte for NULL termination. Servers with very long error
messages can however cause truncation of the string, which currently
isn't very clear, and leads to badly formatted output.
This appends a "...\n" (or just "..." in case the format didn't with a
newline char) marker to the end of the string to clearly show
that it has been truncated.
Also include a unittest covering infof() to try and catch any bugs
introduced in this quite important function.
Closes#3216
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
As has been outlined in the DEPRECATE.md document, the axTLS code has
been disabled for 6 months and is hereby removed.
Use a better supported TLS library!
Assisted-by: Daniel Gustafsson
Closes#3194
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
This allows the use of PKCS#11 URI for certificates and keys without
setting the corresponding type as "ENG" and the engine as "pkcs11"
explicitly. If a PKCS#11 URI is provided for certificate, key,
proxy_certificate or proxy_key, the corresponding type is set as "ENG"
if not provided and the engine is set to "pkcs11" if not provided.
Acked-by: Nikos Mavrogiannopoulos
Closes#2333
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes#2631
If configure detects fnmatch to be available, use that instead of our
custom one for FTP wildcard pattern matching. For standard compliance,
to reduce our footprint and to use already well tested and well
exercised code.
A POSIX fnmatch behaves slightly different than the internal function
for a few test patterns currently and the macOS one yet slightly
different. Test case 1307 is adjusted for these differences.
Closes#2626
A non-escaped bracket ([) is for a character group - as documented. It
will *not* match an individual bracket anymore. Test case 1307 updated
accordingly to match.
Problem detected by OSS-Fuzz, although this fix is probably not a final
fix for the notorious timeout issues.
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8525Closes#2614
The previous limit of 5 can still end up in situation that takes a very
long time and consumes a lot of CPU.
If there is still a rare use case for this, a user can provide their own
fnmatch callback for a version that allows a larger set of wildcards.
This commit was triggered by yet another OSS-Fuzz timeout due to this.
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8369Closes#2587
unit1309 and vtls/gtls: error: arithmetic on a null pointer treated as a
cast from integer to pointer is a GNU extension
Reported-by: Rikard Falkeborn
Fixes#2466Closes#2468
This patch adds CURLOPT_DNS_SHUFFLE_ADDRESSES to explicitly request
shuffling of IP addresses returned for a hostname when there is more
than one. This is useful when the application knows that a round robin
approach is appropriate and is willing to accept the consequences of
potentially discarding some preference order returned by the system's
implementation.
Closes#1694
When targeting x64, MinGW-w64 complains about conversions between
32-bit long and 64-bit pointers. Fix this by reusing the
GNUTLS_POINTER_TO_SOCKET_CAST / GNUTLS_SOCKET_TO_POINTER_CAST logic
from gtls.c, moving it to warnless.h as CURLX_POINTER_TO_INTEGER_CAST /
CURLX_INTEGER_TO_POINTER_CAST.
Closes https://github.com/curl/curl/pull/2341
This enables users to preresolve but still take advantage of happy
eyeballs and trying multiple addresses if some are not connecting.
Ref: https://github.com/curl/curl/pull/2260
Whenever an expected pattern syntax rule cannot be matched, the
character starting the rule loses its special meaning and the parsing
is resumed:
- backslash at the end of pattern string matches itself.
- Error in [:keyword:] results in set containing :\[dekorwy.
Unit test 1307 updated for this new situation.
Closes#2273
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
Additional mime-specific tests.
Existing tests updated to reflect small differences (Expect: 100-continue,
data size change due to empty lines, etc).
Option -F headers= keyword added to tests.
test1135 disabled until the entry point order change is resolved.
New example smtp-mime.
Examples postit2 and multi-post converted from form API to mime API.
Update the progress timers `t_nslookup`, `t_connect`, `t_appconnect`,
`t_pretransfer`, and `t_starttransfer` to track the total times for
these activities when a redirect is followed. Previously, only the times
for the most recent request would be tracked.
Related changes:
- Rename `Curl_pgrsResetTimesSizes` to `Curl_pgrsResetTransferSizes`
now that the function only resets transfer sizes and no longer
modifies any of the progress timers.
- Add a bool to the `Progress` struct that is used to prevent
double-counting `t_starttransfer` times.
Added test case 1399.
Fixes#522 and Known Bug 1.8
Closes#1602
Reported-by: joshhe on github
... to make all libcurl internals able to use the same data types for
the struct members. The timeval struct differs subtly on several
platforms so it makes it cumbersome to use everywhere.
Ref: #1652Closes#1693
Prevent `Curl_pgrsTime` from modifying `t_starttransfer` when invoked
with `TIMER_STARTTRANSFER` more than once during a single request.
When a redirect occurs, this is considered a new request and
`t_starttransfer` can be updated to reflect the `t_starttransfer` time
of the redirect request.
Closes#1616
Bug: https://github.com/curl/curl/pull/1602#issuecomment-310267370
The 'list element' struct now has to be within the data that is being
added to the list. Removes 16.6% (tiny) mallocs from a simple HTTP
transfer. (96 => 80)
Also removed return codes since the llist functions can't fail now.
Test 1300 updated accordingly.
Closes#1435
MinGW-w64 complains:
warning: conversion to 'long int' from 'time_t {aka long long int}' may
alter its value [-Wconversion]
Fix this by using the correct type.
This checks the new behavior of Curl_splaygetbest, so that the smallest
node not larger than the key is removed, and FIFO behavior is kept even
when there are multiple nodes with the same key.
Closes#1358
Multi handles repeatedly invert the queue of pending easy handles when
used with CURLMOPT_MAX_TOTAL_CONNECTIONS. This is caused by a multistep
process involving Curl_splaygetbest and violates the FIFO property of
the multi handle.
This patch fixes this issue by redefining the "best" node in the
context of timeouts as the "smallest not larger than now", and
implementing the necessary data structure modifications to do this
effectively, namely:
- splay nodes with the same key are now stored in a doubly-linked
circular list instead of a non-circular one to enable O(1)
insertion to the tail of the list
- Curl_splayinsert inserts nodes with the same key to the tail of
the same list
- in case of multiple nodes with the same key, the one on the head of
the list gets selected
... to make it less likely that we forget that the function actually
does case insentive compares. Also replaced several invokes of the
function with a plain strcmp when case sensitivity is not an issue (like
comparing with "-").
This only excludes building unit tests from default build ( 'all' Make
target or "Build Solution" in VisualStudio). The projects and Make
targets will still be generated and shown in supporting IDEs.
Fixes https://github.com/curl/curl/issues/981
Reported-by: Randy Armstrong
Closes https://github.com/curl/curl/pull/990
CMake build now using BUILD_TESTING=ON/OFF (default is OFF) to build
tests and enabling CTest integration. Options BUILD_CURL_TESTS and
BUILD_DASHBOARD_REPORTS was removed.
Closes#882
Reviewed-by: Brad King
warning: implicit declaration of function 'sprintf_was_used'
[-Wimplicit-function-declaration]
Follow up to the modications made to tests/libtest in commit 55452ebdff
as we prefer not to use sprintf() now.
- Add unit test 1604 to test the sanitize_file_name function.
- Use -DCURL_STATICLIB when building libcurltool for unit testing.
- Better detection of reserved DOS device names.
- New flags to modify sanitize behavior:
SANITIZE_ALLOW_COLONS: Allow colons
SANITIZE_ALLOW_PATH: Allow path separators and colons
SANITIZE_ALLOW_RESERVED: Allow reserved device names
SANITIZE_ALLOW_TRUNCATE: Allow truncating a long filename
- Restore sanitization of banned characters from user-specified outfile.
Prior to this commit sanitization of a user-specified outfile was
temporarily disabled in 2b6dadc because there was no way to allow path
separators and colons through while replacing other banned characters.
Now in such a case we call the sanitize function with
SANITIZE_ALLOW_PATH which allows path separators and colons to pass
through.
Closes https://github.com/curl/curl/issues/624
Reported-by: Octavio Schroeder
It isn't used by the code in current conditions but for safety it seems
sensible to at least not crash on such input.
Extended unit test 1395 to verify this too as well as a plain "/" input.
The hashes can vary between architectures (e.g. Sparc differs from x86_64).
This is not a fatal problem but just reduces the coverage of these white-box
tests, as the assumptions about into which hash bucket each key falls are no
longer valid.
This avoids unnecessary dynamic allocs and as this also removed the last
users of *hash_alloc() and *hash_destroy(), those two functions are now
removed.
- cache entries must be also refreshed when they are in use
- have the cache count as inuse reference too, freeing timestamp == 0 special
value
- use timestamp == 0 for CURLOPT_RESOLVE entries which don't get refreshed
- remove CURLOPT_RESOLVE special inuse reference (timestamp == 0 will prevent refresh)
- fix Curl_hostcache_clean - CURLOPT_RESOLVE entries don't have a special
reference anymore, and it would also release non CURLOPT_RESOLVE references
- fix locking in Curl_hostcache_clean
- fix unit1305.c: hash now keeps a reference, need to set inuse = 1
The function "free" is documented in the way that no action shall occur for
a passed null pointer. It is therefore not needed that a function caller
repeats a corresponding check.
http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first
This issue was fixed by using the software Coccinelle 1.0.0-rc24.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
SSLeay was the name of the library that was subsequently turned into
OpenSSL many moons ago (1999). curl does not work with the old SSLeay
library since years. This is now reflected by only using USE_OPENSSL in
code that depends on OpenSSL.
In commit 0b3750b5c2 (released in 7.36.0) we fixed a timeout issue
but instead broke the timings.
To fix this, I introduce a new timestamp to use for the timeouts and
restored the previous timestamp and timestamp position so that the old
timer functionality is restored.
In addition to that, that change also broke connection timeouts for when
more than one connect was used (as it would then count the total time
from the first connect and not for the most recent one). Now
Curl_timeleft() has been modified so that it checks against different
start times depending on which timeout it checks.
Test 1303 is updated accordingly.
Bug: http://curl.haxx.se/mail/lib-2014-05/0147.html
Reported-by: Ryan Braud
If the precision is indeed shorter than the string, don't strlen() to
find the end because that's not how the precision operator works.
I also added a unit test for curl_msnprintf to make sure this works and
that the fix doesn't a few other basic use cases. I found a POSIX
compliance problem that I marked TODO in the unit test, and I figure we
need to add more tests in the future.
Reported-by: Török Edwin
memdebug.h already contains all required definitions and including
curl_memory.h causes errors like the following:
tests/unit/unit1394.c:119: undefined reference to `Curl_cfree'
tests/unit/unit1394.c:120: undefined reference to `Curl_cfree'
A base64 string should be a multiple of 4 characters in length, not
contain any more than 2 padding characters and only contain padding
characters at the end of string. For example: Y3VybA==
Strings such as the following are considered invalid:
Y= - Invalid length
Y== - Invalid length
Y=== - More than two padding characters
Y=x= - Padding character contained within string
libcurl truncates usernames and passwords it reads from .netrc to
LOGINSIZE and PASSWORDSIZE (64) characters without any indication to
the user, to ensure the values returned from Curl_parsenetrc fit in a
caller-provided buffer.
Fix the interface by passing back dynamically allocated buffers
allocated to fit the user's input. The parser still relies on a
256-character buffer to read each line, though.
So now you can include an ~246-character password in your .netrc,
instead of the previous limit of 63 characters.
Reported-by: Colby Ranger
RFC3986 details how a path part passed in as part of a URI should be
"cleaned" from dot sequences before getting used. The described
algorithm is now implemented in lib/dotdot.c with the accompanied test
case in test 1395.
Bug: http://curl.haxx.se/bug/view.cgi?id=1200
Reported-by: Alex Vinnik
These verfy that the 'memory tracking' subsystem is actually doing its
job when using curl tool (#96), a test in libtest (#558) and also a unit
test (#1330), in order to prevent regressions in this functionallity.
Automake documents that doing this will make it choose a different name
for intermediate object files even when sharing source files across
targets of same Makefile.am.
Up to automake 1.13.1 target's intermediate object files were placed
in the build subdirectory of the target. We depended on this, probably
undocumented behavior, to achieve same behavior as if a per-target flag
had been specified when building targets that actually belong to
different Makefile.am files.
It seems automake 1.13.2 is going to break behavior mentioned above.
So, lets use a documented behavior in order to achieve same purpose,
across automake versions, no matter where automake wishes to place
intermediate object files.
Our build targets that already were using a per-target '_CFLAGS' or
'_CPPFLAGS' need no 'fixing', these were already 'fixed'. The only
Makefile.am or Makefile.in files in libcurl's source tree touched by
this 'fix' are tests/libtest/Makefile.inc and tests/unit/Makefile.inc.
This commit renames lib/setup.h to lib/curl_setup.h and
renames lib/setup_once.h to lib/curl_setup_once.h.
Removes the need and usage of a header inclusion guard foreign
to libcurl. [1]
Removes the need and presence of an alarming notice we carried
in old setup_once.h [2]
----------------------------------------
1 - lib/setup_once.h used __SETUP_ONCE_H macro as header inclusion guard
up to commit ec691ca3 which changed this to HEADER_CURL_SETUP_ONCE_H,
this single inclusion guard is enough to ensure that inclusion of
lib/setup_once.h done from lib/setup.h is only done once.
Additionally lib/setup.h has always used __SETUP_ONCE_H macro to
protect inclusion of setup_once.h even after commit ec691ca3, this
was to avoid a circular header inclusion triggered when building a
c-ares enabled version with c-ares sources available which also has
a setup_once.h header. Commit ec691ca3 exposes the real nature of
__SETUP_ONCE_H usage in lib/setup.h, it is a header inclusion guard
foreign to libcurl belonging to c-ares's setup_once.h
The renaming this commit does, fixes the circular header inclusion,
and as such removes the need and usage of a header inclusion guard
foreign to libcurl. Macro __SETUP_ONCE_H no longer used in libcurl.
2 - Due to the circular interdependency of old lib/setup_once.h and the
c-ares setup_once.h header, old file lib/setup_once.h has carried
back from 2006 up to now days an alarming and prominent notice about
the need of keeping libcurl's and c-ares's setup_once.h in sync.
Given that this commit fixes the circular interdependency, the need
and presence of mentioned notice is removed.
All mentioned interdependencies come back from now old days when
the c-ares project lived inside a curl subdirectory. This commit
removes last traces of such fact.
This reverts renaming and usage of lib/*.h header files done
28-12-2012, reverting 2 commits:
f871de0... build: make use of 76 lib/*.h renamed files
ffd8e12... build: rename 76 lib/*.h files
This also reverts removal of redundant include guard (redundant thanks
to changes in above commits) done 2-12-2013, reverting 1 commit:
c087374... curl_setup.h: remove redundant include guard
This also reverts renaming and usage of lib/*.c source files done
3-12-2013, reverting 3 commits:
13606bb... build: make use of 93 lib/*.c renamed files
5b6e792... build: rename 93 lib/*.c files
7d83dff... build: commit 13606bbfde follow-up 1
Start of related discussion thread:
http://curl.haxx.se/mail/lib-2013-01/0012.html
Asking for confirmation on pushing this revertion commit:
http://curl.haxx.se/mail/lib-2013-01/0048.html
Confirmation summary:
http://curl.haxx.se/mail/lib-2013-01/0079.html
NOTICE: The list of 2 files that have been modified by other
intermixed commits, while renamed, and also by at least one
of the 6 commits this one reverts follows below. These 2 files
will exhibit a hole in history unless git's '--follow' option
is used when viewing logs.
lib/curl_imap.h
lib/curl_smtp.h
BLANK_AT_MAKETIME may be used in our Makefile.am files to blank
LIBS variable used in generated makefile at makefile processing
time. Doing this functionally prevents LIBS from being used for
all link targets in given makefile.
Since automake 1.12.4, the warnings are issued on running automake:
warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Avoid INCLUDES and roll these flags into AM_CPPFLAGS.
Compile tested on:
Ubuntu 10.04 (automake 1:1.11.1-1)
Ubuntu 12.04 (automake 1:1.11.3-1ubuntu2)
Arch Linux (automake 1.12.4)
BUILDING_LIBCURL and CURL_STATICLIB are no longer defined in curl_config.h,
configure will generate appropriate conditionals so that mentioned symbols
get defined and used in Makefiles at compilation time
Previous interfaces for these libcurl internal functions did not allow to tell
apart a legitimate zero size result from an error condition. These functions
now return a CURLcode indicating function success or otherwise specific error.
Output size is returned using a pointer argument.
All usage of these two functions, and others closely related, has been adapted
to the new interfaces. Relative error and OOM handling adapted or added where
missing. Unit test 1302 also adapted.
adding unit test for Curl_llist_move, documenting unit-tested functions
in llist.c, changing unit-test to unittest, replacing assert calls with
abort_unless calls
Properly deal with the fact that the last fread() call most probably is
a short read, and when using callbacks in fact all calls can be short
reads. No longer consider a file read done until it returns a 0 from the
read function.
Reported by: Aaron Orenstein
Bug: http://curl.haxx.se/mail/lib-2011-06/0048.html
All C and H files now (should) feature the proper project curl source
code header, which includes basic info, a copyright statement and some
basic disclaimers.
This makes it possible to skip the call to unit_stop() in such
cases. Also use Curl_safefree() in unit test 1302 so it will
pass the memory torture test.
