This commit causes uv_get_process_title() to:
- return EINVAL if the buffer is null or size is 0
- return ENOBUFS if the title is too big for the buffer
- null terminate the buffer on success
Fixes: https://github.com/libuv/libuv/issues/315
PR-URL: https://github.com/libuv/libuv/pull/928
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
This commit causes Window file watching events to compare the
entire file path when filtering events. This fixes a bug where
incomplete path comparisons would cause invalid events to be
raised.
Refs: https://github.com/libuv/libuv/pull/682
PR-URL: https://github.com/libuv/libuv/pull/924
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Do not let `tty_pty` test fail if no terminals are available
to `openpty()`.
PR-URL: https://github.com/libuv/libuv/pull/919
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Put a space after the '#' and handle messages with newlines.
PR-URL: https://github.com/libuv/libuv/pull/898
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
A skipped test already prints a diagnostic. Dumping its output just
prints the same message twice.
PR-URL: https://github.com/libuv/libuv/pull/898
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
With the non-tap output, it's sometimes difficult to distinguish skipped
tests from test failures.
PR-URL: https://github.com/libuv/libuv/pull/898
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
It is not guaranteed which stream will read the data first.
PR-URL: https://github.com/libuv/libuv/pull/807
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Closing the handle does not make ReadConsoleW exit reliably on
Windows 7 and above. Thus, after switching from line to raw mode,
keypresses were held until enter was pressed. This makes ReadConsoleW
exit by writing a return keypress to its input buffer, similar to
what was already done for raw mode.
Fixes: https://github.com/libuv/libuv/issues/852
PR-URL: https://github.com/libuv/libuv/pull/866
Reviewed-by: Bert Belder <bertbelder@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
On AIX, if a 'accept' call fails ECONNRESET is set on the socket which
causes uv__emfile_trick to not work as intended and this test to fail.
Fixes: https://github.com/libuv/libuv/issues/845
PR-URL: https://github.com/libuv/libuv/pull/870
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
`POLLHDRUP` is not implemented on AIX. Therefore `UV_DISCONNECT` will
never be set on `events`. This causes the socket to never be closed and
the tests to be stuck inside `pollset_poll` indefinitely, resulting in a
timeout.
This fixes the following tests:
- poll_duplex
- poll_unidirectional
Updated docs to let end users know that `UV_DISCONNECT` can be set, but
is unsupported on AIX.
Fixes: https://github.com/libuv/libuv/issues/844
PR-URL: https://github.com/libuv/libuv/pull/857
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Cast the `ru_majflt` and `ru_maxrss` field to `unsigned long long` when
printing them with `"%llu"`.
Warnings introduced in commit 6f17a61 ("win: add maxrss, pagefaults to
uv_getrusage()".)
PR-URL: https://github.com/libuv/libuv/pull/855
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
This commit populates the ru_majflt and ru_maxrss fields of
uv_getrusage() on Windows.
PR-URL: https://github.com/libuv/libuv/pull/805
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The file descriptor that you receive from ahafs has to be part of the
pollset_poll set of interest in order to receive events. This does not
happen until we are in the event loop causing the test to hang and
therefore timeout.
PR-URL: https://github.com/libuv/libuv/pull/838
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
'futimens' is only implemented on AIX 7.1. Other functions like
'utimes' and 'utimes' are merely stub functions that return ENOSYS
on AIX 6.1 and below. Skip test fs_futime for AIX versions below 7.1.
PR-URL: https://github.com/libuv/libuv/pull/811
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Currently, the tests assert that the home directory doesn't end
in a slash. However, if the home directory is / or something like
C:\, then this assertion is incorrect. This commit adds special
handling for these cases.
Fixes: https://github.com/libuv/libuv/issues/812
PR-URL: https://github.com/libuv/libuv/pull/813
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Find the real name of the tty using ttyname_r(3) instead of
opening "/dev/tty" which causes trouble if the fd doesn't point to the
controlling terminal.
PR-URL: https://github.com/libuv/libuv/pull/779
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
The uid and gid fields in uv_passwd_t are of type long so use %ld for
printing them. Fixes two -Wformat compiler warnings.
PR-URL: https://github.com/libuv/libuv/pull/797
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
This commit adds the copyright header to the two tests that
were missing it.
PR-URL: https://github.com/libuv/libuv/pull/782
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Calling uv_cond_wait without uv_cond_signal/uv_cond_broadcast may
cause deadlock. This commit avoids this situation as well as tests
these functions.
PR-URL: https://github.com/libuv/libuv/pull/728
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
libuv has multiple functions which return buffers. Make them consistent
with the following rules: the returned size *does not* include the null
byte, but the buffer *is* null terminated.
There is only one exception to the above: Linux abstract sockets,
because null bytes are not used as string terminators in those.
Refs: https://github.com/libuv/libuv/pull/674
PR-URL: https://github.com/libuv/libuv/pull/690
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Somtimes (once every 10 runs or so) the socket would 'connect' before
'uv_close' was called. This caused EHOSTUNREACH to be set for SO_ERROR
instead of ECANCELED.
PR-URL: https://github.com/libuv/libuv/pull/744
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
On PPC (linux and AIX) uv_thread_join (which is just a call to
pthread_join) takes quite a while. Increased the timeout of this
specific test on PPC so that there is ample time for all threads to join
back. The fs_do and getaddrinfo_do calls do not take up much time.
Also removing the ifdef for AIX around fs_do since it did nothing.
Fixes: https://github.com/libuv/libuv/issues/687
PR-URL: https://github.com/libuv/libuv/pull/737
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Libuv would abort() when trying to watch a file descriptor that is
not compatible with epoll-style polling; file descriptors referring
to on-disk files fall into this category.
File descriptors that libuv creates itself are not an issue but
external ones that come in through the uv_poll_init() API are.
Make uv_poll_init() check whether the file descriptor is accepted by
the underlying system call and return an error when it's not.
Fixes: https://github.com/libuv/libuv/issues/658
PR-URL: https://github.com/libuv/libuv/pull/659
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Disabled the filesystem portion of the test as there are known issues
with AIX and its fs. This particular test was failing with a timeout.
PR-URL: https://github.com/libuv/libuv/pull/689
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
If the child process reaches uv_run before the parent has closed the
write end of the pipe the test fails with the following output:
Assertion failed in test/test-pipe-close-stdout-read-stdin.c
on line 86: uv_run(uv_default_loop(), UV_RUN_NOWAIT) == 0
Assertion failed in test/test-pipe-close-stdout-read-stdin.c
on line 97: WIFEXITED(status) && WEXITSTATUS(status) == 0
This is mainly seen on AIX, but does not mean that it can not occur on
linux. This change causes the child process to be blocked until the
write end of the pipe is properly closed. See 'man 7 pipe'[0] for
more detail.
[0]http://linux.die.net/man/7/pipe
PR-URL: https://github.com/libuv/libuv/pull/688
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
uv__fs_buf_iter currently sets req->bufs to NULL after it is done, but
if the operation fails with EINTR then it will be retried, at which
point it expects the bufs to not be NULL, causing a seg fault as in
https://github.com/nodejs/node/issues/4291.
uv__fs_buf_iter should not set req->bufs to NULL if the operation
fails with EINTR.
Also, when it sets req->bufs to NULL, it should set req->nbufs to 0 as
well, so we don't have the messy situation of a positive nbufs with no
actual bufs.
PR-URL: https://github.com/libuv/libuv/pull/661
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Trying to acquire a rwlock that the current thread already owns may fail
(not "shall fail") with EDEADLK. Libuv considers that a fatal error and
rightly so in my opinion; it normally means the program contains a logic
error.
The test had indeed logic errors. This commit splits off the UV_EBUSY
return code testing into a separate thread, eliminating the potential
for self-deadlock.
Fixes: https://github.com/libuv/libuv/issues/544
PR-URL: https://github.com/libuv/libuv/pull/649
Reviewed-By: Jeremy Whitlock <jwhitlock@apache.org>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
The following changeset
442b8a5a84 "unix: use QUEUE_MOVE when iterating over lists"
introduced a new assert failure:
`queue_foreach_delete` failed: exit code 6
Output from process `queue_foreach_delete`:
run-tests: src/unix/linux-inotify.c:244: uv_fs_event_stop: Assertion `w != ((void *)0)' failed.
Simplest test case for this:
1. create and start two uv_fs_event_t for the same path;
2. in the callback for the first one, call uv_close() on it;
3. assert/segfault while accessing the second uv_fs_event_t from uv__inotify_read().
PR-URL: https://github.com/libuv/libuv/pull/621
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
