On Unix you can pass bound and even connected socket to uv_tcp_open
and it will work as expected: you can run uv_listen or other io
functions (uv_read, uv_write) on it without problems.
On windows on the other hand the function always assumes to have clean
socket and for example uv_listen will try to bind it again, and
uv_read/write will return with errors about unreadable streams
(basically invalid internal flags).
To check if socket is already bound uv_tcp_getsockname is called which
on windows returns error when socket is unbound. To further
differentiate connected one from just bound, uv_tcp_getpeername also
returns error but when target socket is not connected.
PR-URL: https://github.com/libuv/libuv/pull/1447
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This is because on some platforms like z/OS, setgid(0) is
allowed for non-superusers. So instead, use setgid(-1) to
get UV_EINVAL to test that spawn failure returns the right
return code.
PR-URL: https://github.com/libuv/libuv/pull/1456
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
z/OS allows non root users to chown a file to root via the
CHOWN.UNRESTRICTED profile. So avoid that test on z/OS.
PR-URL: https://github.com/libuv/libuv/pull/1454
Reviewed-By: Colin Ihrig <cjihrig@gmail.com
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Should make the dreaded "%1 is not a valid Win32 application" error
message a thing of the past.
PR-URL: https://github.com/libuv/libuv/pull/1116
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Out-of-band TCP messages are used for TCP data
transmission outside (outband) the inbound TCP
data. These packets are sent with an
"urgent pointer", but previously discarded.
Additionally, when using (e)poll a POLLPRI is
triggered when an interrupt signal is received
on GPIO capable systems such as the Raspberry Pi.
PR-URL: https://github.com/libuv/libuv/pull/1040
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Like the previous commit, except now the signal mask is reset instead
of the signal disposition. This does open a race window where blocked
signals can get delivered in the interval between the pthread_sigmask()
call and the execve() call (and may end up terminating the process) but
that cannot be helped; the same caveat applies to the previous commit.
Fixes: https://github.com/nodejs/node/issues/13662
PR-URL: https://github.com/libuv/libuv/pull/1376
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Signal dispositions are inherited by child processes. Libuv itself
does not touch them (if you don't use uv_signal_start(), that is)
but the embedder might and probably does in the case of SIGPIPE.
Reset the disposition for signals 1-31 to their defaults right before
execve'ing into the new process.
Fixes: https://github.com/nodejs/node/issues/13662
PR-URL: https://github.com/libuv/libuv/pull/1376
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
atomic_cas_ptr() is for compare-and-swap pointer addresses.
So when building 64 bit:
1. `ptr` is used casted to a pointer value (4-byte into 8-byte).
2. atomic_cas_ptr reads 8-byte at `ptr` and returns
In the case of `uv_async_send`, if handle->pending is 0, cmpxchgi()
actually returns the value of the 4-bytes past handle->pending,
causing uv__async_send to never be called.
The modified test-async-null-cb.c hangs at uv_run in this case.
PR-URL: https://github.com/libuv/libuv/pull/1361
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
The FILE* object is not guaranteed to be in the same state after
a fork. Instead store the file descriptor instead and use that in
the child process.
PR-URL: https://github.com/libuv/libuv/pull/1369
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
File read or write from specified position will move file pointer on
Windows but not on POSIX. This makes Windows behave as other
supported platforms.
Ref: https://github.com/nodejs/node/issues/9671
PR-URL: https://github.com/libuv/libuv/pull/1357
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
The uv__get_osfhandle() function is a private functio of the
Windows subsystem, and its used to get a Windows HANDLE out
of a file descriptor number.
The motivation behind making this function public is to
allow Node.js programs to pass file descriptors created
using fs.open() to native Node.js C++ add-ons, and be able to
successfully convert them to Windows HANDLEs.
Refs: https://github.com/libuv/libuv/pull/1166
Refs: https://github.com/nodejs/node/issues/6369
Fixes: https://github.com/libuv/libuv/issues/1291
PR-URL: https://github.com/libuv/libuv/pull/1323
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The cygwin runtime library fails to connect a socket client to a
listening server within the same thread. Test cases that use
this approach hang while waiting for the connection to complete.
This can be reproduced independent of libuv in a simple example
using both socket/bind/listen and socket/connect in a single
thread.
Avoid this problem in our test suite by skipping such tests on cygwin.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On Cygwin `recvmsg` always sets `msg_controllen` to zero on a
message received from a named pipe. Therefore we cannot use
`sendmsg` to send handles for ipc. Return failure early from
this code path as `ENOSYS`.
Skip tests requiring this feature since it is not available.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Cygwin and MSYS2 are POSIX layers implemented on top of Windows.
Use our POSIX `poll(2)` implementation of our poll abstraction.
For most other components we already have dedicated sources
implementing them in terms of APIs available on Cygwin or
providing non-implementations of components not supported.
This leaves only three components that need Cygwin-specific
implementations:
* uv_uptime: implement using sysinfo
* uv_resident_set_memory: add a placeholder returning UV_ENOSYS
* uv_cpu_info: add a placeholder returning UV_ENOSYS
Update our test suite to account for features not available
due to Cygwin platform limitations or our placeholders.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
On platforms not supporting fsevents do not run the fork
fsevent tests.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Factor out a dedicated test macro for use on platforms that
do not support fsevents instead of duplicating the os390
platform condition and explanation text.
PR-URL: https://github.com/libuv/libuv/pull/1312
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
A small timeout resulted in flaky behaviour on the z/OS test
machine.
PR-URL: https://github.com/libuv/libuv/pull/1353
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Delay the timer start to be sure all handles are created when `timer_cb`
is executed. In some cases this was not the case causing the following
error:
```
not ok 51 - tcp_write_queue_order
exit code 134
Output from process `tcp_write_queue_order`:
lt-run-tests: src/unix/core.c:166: uv_close: Assertion `0' failed.
```
PR-URL: https://github.com/libuv/libuv/pull/1338
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Andrius Bentkus <andrius.bentkus@gmail.com>
Basic implementation of uv__io_fork on z/OS.
As of now, since filesystem events are not supported,
skip all of those tests on z/OS.
PR-URL: https://github.com/libuv/libuv/pull/1303
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit fixes the following warning:
warning C4047: char *' differs in levels of indirection from 'char
(*)[1]'
PR-URL: https://github.com/libuv/libuv/pull/1290
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Fix a bug in process_copy_output that would cause output larger
than 1kb to be incorrectly split into lines.
PR-URL: https://github.com/libuv/libuv/pull/1325
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Test that the fast path will continue writing. On failure, this test
will timeout.
PR-URL: https://github.com/libuv/libuv/pull/1308
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Fixes deadstore in uv_pipe_bind as 'sockfd' is no longer used.
Fixes deadstore in test related to unused variables or missing
assert.
PR-URL: https://github.com/libuv/libuv/pull/1288
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
At least starting with Darwin Kernel Version 16.4.0, sending a SIGTERM
to a process that is still starting up kills it with SIGKILL instead of
SIGTERM.
Fixes: https://github.com/libuv/libuv/issues/1226
PR-URL: https://github.com/libuv/libuv/pull/1282
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Added the uv_loop_fork() API that must be called in a child process to
continue using an existing loop. Internally this calls a uv__io_fork
function for each supported platform, similar to the way
uv__platform_loop_init works.
After this call, existing and new IO, async and signal watchers will
contiue working as before on all platforms, as will the
threadpool (although any threads it was using are of course gone).
On Linux and BSDs that use kqueue, existing and new fsevent watchers
will also continue to work as expected. On OS X, though, directory
fsevents will not be able to use the optimized CoreFoundation path if
they had already been used in the parent process, instead falling back
to the kqueue path used on other BSDs.
Existing fsevent watchers will not function on AIX or SunOS. This
could be relatively easily fixed by someone with AIX knowledge in the
future, but SunOS will require some additional work to keep track if
the watchers.
A new test file, test/test-fork.c, was added to contain fork-related
tests to verify functionality in the child process.
PR-URL: https://github.com/libuv/libuv/pull/846
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
"setenv" on z/OS returns successfully on a NULL ptr argument
for name. Check for this on all unixes.
PR-URL: https://github.com/libuv/libuv/pull/1243
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
It behaves as `uv_signal_start` but it resets the signal handler as soon
as the signal is received.
Fixes: https://github.com/libuv/libuv/issues/1104
PR-URL: https://github.com/libuv/libuv/pull/1106
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Substitute the `z` length modifier with `l` to avoid warnings, as the
`z` modifier is defined in the C99 standard.
PR-URL: https://github.com/libuv/libuv/pull/1220
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Fixes an issue where the Windows-only tty_large_write attempts to write
an uninitialized buffer to the console.
PR-URL: https://github.com/libuv/libuv/pull/1212
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Use built-in proctitle implementation because there is no such thing as
a process title on zOS.
PR-URL: https://github.com/libuv/libuv/pull/1208
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
This patch enables querying and setting the process title on AIX.
libuv takes ownership of the memory for argv and returns a deep copy
of the array and its contents.
It also enables the process_title test case.
The process title can be changed on AIX but is handled differently
to Linux/Mac. Commands like ps read the original argv array passed
to the process instead of the memory at argv[0]. To change the process
title we need to update argv[0] to point at a new string and set
argv[1] to NULL (if it exists). This means the process title
can be set to a string of any length.
PR-URL: https://github.com/libuv/libuv/pull/1187
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Handle the case when it's called after the request has ended, or in case
it ended with an error.
PR-URL: https://github.com/libuv/libuv/pull/1181
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
The error path frees `req->alloc` but that hasn't been set yet when
`service` and `node` are both NULL. Simply return instead of jumping
to the error handling block.
Fixes: https://github.com/libuv/libuv/issues/1122
PR-URL: https://github.com/libuv/libuv/pull/1123
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
uv_spawn() on Windows will fail with ERROR_ELEVATION_REQUIRED
if attempting to run an application that requires elevation.
Fixes: https://github.com/nodejs/node/issues/9464
PR-URL: https://github.com/libuv/libuv/pull/1154
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Fix the #ifdef logic to make sure all the available fields filled in the
`stat` struct are correcly copied into the `uv_stat_t` struct. Before
this change, the `n_sec` were being set to 0.
PR-URL: https://github.com/libuv/libuv/pull/1152
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
