This commit uses the Register File Interest feature on z/OS
to enable users to monitor file system events.
The poll call is used to check for file descriptors as well
as a message queue that z/OS will report file system events
on. The last item on the list used by poll will contain the
message queue id instead of a file descriptor.
Limitation:
Writes to a directory (that is, file creation and deletion)
do not generate a change message for a registered directory.
PR-URL: https://github.com/libuv/libuv/pull/1311
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Maps pid 0 to the current process, simulating Linux kill sending signal
to the process group.
Adds detection of invalid signals. If the signum is invalid - below 0
or NSIG or above – UV_EINVAL will be returned instead of UV_ENOSYS.
PR-URL: https://github.com/libuv/libuv/pull/1642
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Verify that quick setup and teardown of the threadpool doesn't cause
crashes or hangs.
PR-URL: https://github.com/libuv/libuv/pull/1639
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Used a shared uv_mutex_t in unix implementations of these functions
to prevent simultaneous execution.
Fixes: https://github.com/libuv/libuv/issues/271
PR-URL: https://github.com/libuv/libuv/pull/1640
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Add getter/setter functions for the fields of public structs that
might be relevant to e.g. Node.js addons.
Through these methods, ABI compatibility for a subset of the ABI
is easier to achieve, since using them makes code independent
of the exact offsets of these fields.
The intended use case that prompted this are N-API addons for
Node.js, which look for more long-term ABI compatibility guarantees
than typical Node code. With these helper functions, using libuv
directly should no longer be an obstacle for such addons.
PR-URL: https://github.com/libuv/libuv/pull/1657
Refs: https://github.com/nodejs/node/issues/13512
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Unbreaks libuv compilation on Windows.
PR-URL: https://github.com/libuv/libuv/pull/1641
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
I'm 99% sure `WaitForSingleObject()` already issues a memory barrier for
thread objects but since I could find no mention of that on MSDN, let's
play it safe and do it ourselves, too.
PR-URL: https://github.com/libuv/libuv/pull/1634
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Stack-allocate the `uv_loop_t` instance, no reason to heap-allocate it.
PR-URL: https://github.com/libuv/libuv/pull/1634
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Verify that quick setup and teardown of the threadpool doesn't cause
crashes or hangs.
PR-URL: https://github.com/libuv/libuv/pull/1639
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
We use the UV_HANDLE_BOUND flag to mark a socket as bound to a
port. We need to do this for sockets that are sent from another
process as well as sockets that created by the process itself.
First check if the port number is non-zero. If yes then mark
it as bound.
PR-URL: https://github.com/libuv/libuv/pull/1348
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Include `<winioctl.h>` for the definition of `FSCTL_SET_REPARSE_POINT`
and define `ERROR_SYMLINK_NOT_SUPPORTED` if not already defined.
PR-URL: https://github.com/libuv/libuv/pull/1632
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
uv_if_indextoname() is used to convert an IPv6 scope_id
to an interface identifier string such as %eth0 or %lo.
uv_if_indextoiid() returns an IPv6 interface identifier.
On Unix it calls uv_if_indextoname(). On Windows it uses
snprintf() to return the numeric interface identifier as
a string.
Refs: https://github.com/nodejs/node/pull/14500
PR-URL: https://github.com/libuv/libuv/pull/1445
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Adds new uv_pipe_chmod function which can be used to make the pipe
writable or readable by all users.
PR-URL: https://github.com/libuv/libuv/pull/1386
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
`options.file` is of type `const char*`, don't assign it to a variable
that is a non-const `char*`. The other way around is perfectly legal,
though.
PR-URL: https://github.com/libuv/libuv/pull/1588
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Refael Ackermann <refack@gmail.com>
Reviewed-By: Gireesh Punathil <gpunathi@in.ibm.com>
When sorting tests, keeps platform_output as the first test.
PR-URL: https://github.com/libuv/libuv/pull/1584
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
z/OS does not allow a child process to create threads if it was
forked from a multi-threaded parent.
PR-URL: https://github.com/libuv/libuv/pull/1596
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
These have been around for some time apparently (commit 391f0098de from
May 2011) but went unnoticed so far. No longer.
PR-URL: https://github.com/libuv/libuv/pull/1581
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Fixes uv_fs_stat and uv_fs_lstat returning EINVAL when invoked on a
non-symlink reparse point.
1. Only tries to read symlinks when invoked via lstat (do_lstat == 1).
Rationale is that only lstat can set S_IFLNK because when a file is
tested by stat, symlinks are resolved by the OS and the returned file
must be real. Note that broken symlinks fail at CreateFile.
FILE_ATTRIBUTE_REPARSE_POINT is used by filesystem drivers for purposes
besides symlinks, and uv_fs_stat fails when invoked on these files
because fs__readlink_handle returns ERROR_SYMLINK_NOT_SUPPORTED. By
ignoring the attribute in uv_fs_stat, these files are now handled
correctly.
2. Modifies the logic added to fs__stat_handle to fix#995 as follows:
A failed fs__readlink_handle on a file with a reparse point indicates
that the file is not a symlink. The fix for #995 added code to fall
through and behave as with a normal file in this case. However, this is
not correct because lstat had opened the file with
FILE_FLAG_OPEN_REPARSE_POINT, preventing the filesystem from acting
based on the reparse point contents.
The fix makes fs__stat_handle fail back to the higher level
fs__stat_impl, which sets do_lstat to 0 and re-opens the file without
FILE_FLAG_OPEN_REPARSE_POINT, allowing normal filesystem processing to
take place.
This is also a slightly cleaner solution as symlink fallback is only
handled in one place (fs__stat_impl) instead of two (fs__stat_impl and
fs__stat_handle).
Note that the error tested in the fix for #995,
ERROR_NOT_A_REPARSE_POINT, is not actually returned by Windows in the
case of a non-symlink reparse point. I attempted to reproduce the error
by repeating the test steps in the issue but failed. However, the the
fix logic is preserved out of caution.
3. Adds tests to fs-test.c for the above two changes.
Thorough testing requires some non-trivial setup - like an OSX computer
on the LAN or a custom filesystem driver - so these tests are left
commented out for manual invocation.
PR-URL: https://github.com/libuv/libuv/pull/1522
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
NetBSD must use the uv_udp_set_membership call with
"::1%lo0", similar to FreeBSD.
PR-URL: https://github.com/libuv/libuv/pull/1577
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Follow other BSDs and disable the failing poll_bad_fdtype test on
NetBSD.
PR-URL: https://github.com/libuv/libuv/pull/1574
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
As it is, when the tests run, there is no indicator as to how long the
tests will run, how many more tests are pending.
PR-URL: https://github.com/libuv/libuv/pull/1543
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
On systems that use System V semaphores, it is necessary to destroy
semaphores to free up system resources when the process finishes
execution.
PR-URL: https://github.com/libuv/libuv/pull/1559
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
musl has tiny default thread stack sizes compared to glibc (80 kB vs.
2048 kB or more) so set an explicit stack size to harmonize between
different libcs.
Fixes: https://github.com/libuv/libuv/issues/1507
PR-URL: https://github.com/libuv/libuv/pull/1526
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
NetBSD and FreeBSD can share the can_ipv6_ipv4_dual() function as
is. This commit also corrects the function definition to be
compliant with C standards. This fixes a warning on
NetBSD 8.99.2 with GCC 5.4.0.
PR-URL: https://github.com/libuv/libuv/pull/1535
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This commit adds the O_TRUNC flag to the destination file in
the sendfile() fallback. This allows smaller source files to
be properly copied into larger existing destination files.
Refs: https://github.com/libuv/libuv/pull/1551
PR-URL: https://github.com/libuv/libuv/pull/1552
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Initialize the error variable in uv_fs_copyfile() to zero. If
the source file being copied has no data in it, then it's
possible to make it to the exit without ever setting error.
In this situation, the function's behavior is unpredictable.
Refs: https://github.com/libuv/libuv/pull/1551
PR-URL: https://github.com/libuv/libuv/pull/1552
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This commit introduces an INIT macro to file system functions on
Windows, similar to the one used on Unix platforms. The macro
checks for NULL requests, and returns UV_EINVAL in such
scenarios. This commit also adds support for passing NULL to
uv_fs_req_cleanup(). In this scenario, the function is a
no-op.
Fixes: https://github.com/libuv/libuv/issues/1508
PR-URL: https://github.com/libuv/libuv/pull/1509
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Prior to this change, several of the fs functions checked for
invalid arguments before initializing the fs request. If a
consumer received a UV_EINVAL from one of these functions, and
then called uv_fs_req_cleanup(), the application would crash, as
the pointer being freed was not allocated. This commit makes
sure that all fs functions initialize the request before returning.
Fixes: https://github.com/libuv/libuv/issues/1508
PR-URL: https://github.com/libuv/libuv/pull/1509
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Need to flush out the OOB data. Otherwise, this callback will get
triggered on every poll with nread = 0.
PR-URL: https://github.com/libuv/libuv/pull/1484
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
On Unix you can pass bound and even connected socket to uv_tcp_open
and it will work as expected: you can run uv_listen or other io
functions (uv_read, uv_write) on it without problems.
On windows on the other hand the function always assumes to have clean
socket and for example uv_listen will try to bind it again, and
uv_read/write will return with errors about unreadable streams
(basically invalid internal flags).
To check if socket is already bound uv_tcp_getsockname is called which
on windows returns error when socket is unbound. To further
differentiate connected one from just bound, uv_tcp_getpeername also
returns error but when target socket is not connected.
PR-URL: https://github.com/libuv/libuv/pull/1447
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
This is because on some platforms like z/OS, setgid(0) is
allowed for non-superusers. So instead, use setgid(-1) to
get UV_EINVAL to test that spawn failure returns the right
return code.
PR-URL: https://github.com/libuv/libuv/pull/1456
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
z/OS allows non root users to chown a file to root via the
CHOWN.UNRESTRICTED profile. So avoid that test on z/OS.
PR-URL: https://github.com/libuv/libuv/pull/1454
Reviewed-By: Colin Ihrig <cjihrig@gmail.com
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
Should make the dreaded "%1 is not a valid Win32 application" error
message a thing of the past.
PR-URL: https://github.com/libuv/libuv/pull/1116
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Out-of-band TCP messages are used for TCP data
transmission outside (outband) the inbound TCP
data. These packets are sent with an
"urgent pointer", but previously discarded.
Additionally, when using (e)poll a POLLPRI is
triggered when an interrupt signal is received
on GPIO capable systems such as the Raspberry Pi.
PR-URL: https://github.com/libuv/libuv/pull/1040
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Saúl Ibarra Corretgé <saghul@gmail.com>
