Before this patch, two macros were used to guard IPv6 features in curl
sources: `ENABLE_IPV6` and `USE_IPV6`. This patch makes the source use
the latter for consistency with other similar switches.
`-DENABLE_IPV6` remains accepted for compatibility as a synonym for
`-DUSE_IPV6`, when passed to the compiler.
`ENABLE_IPV6` also remains the name of the CMake and `Makefile.vc`
options to control this feature.
Closes#13349
- add test_05_04 for requests using http/1.0, http/1.1 and h2 against an
Apache resource that does an unclean TLS shutdown.
- revert special workarund in openssl.c for suppressing shutdown errors
on multiplexed connections
- vlts.c restore to its state before 9a90c9dd64Fixes#12885Fixes#12844Closes#12848
- bufref: use strndup
- cookie: use strndup
- formdata: use strndup
- ftp: use strndup
- gtls: use aprintf instead of malloc + strcpy * 2
- http: use strndup
- mbedtls: use strndup
- md4: use memdup
- ntlm: use memdup
- ntlm_sspi: use strndup
- pingpong: use memdup
- rtsp: use strndup instead of malloc, memcpy and null-terminate
- sectransp: use strndup
- socks_gssapi.c: use memdup
- vtls: use dynbuf instead of malloc, snprintf and memcpy
- vtls: use strdup instead of malloc + memcpy
- wolfssh: use strndup
Closes#12453
- add `struct ssl_peer` to keep hostname, dispname and sni
for a filter
- allocate `sni` for use in VTLS backend
- eliminate `Curl_ssl_snihost()` and its use of the download buffer
- use ssl_peer in SSL and QUIC filters
Closes#12349
Some servers don't support the ALPN protocol "http/1.0" (e.g. IIS 10),
avoid it and use "http/1.1" instead.
This reverts commit df856cb5c9 (#10183).
Fixes#12259Closes#12285
- perform connection cache matching against `data->set.ssl.primary`
and proxy counterpart
- fully clone connection ssl config only when connection is used
Closes#12237
Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
- If SSL shutdown is not finished then make an additional call to
SSL_read to gather additional tracing.
- Fix http2 and h2-proxy filters to forward do_close() calls to the next
filter.
For example h2 and SSL shutdown before and after this change:
Before:
Curl_conn_close -> cf_hc_close -> Curl_conn_cf_discard_chain ->
ssl_cf_destroy
After:
Curl_conn_close -> cf_hc_close -> cf_h2_close -> cf_setup_close ->
ssl_cf_close
Note that currently the tracing does not show output on the connection
closure handle. Refer to discussion in #11878.
Ref: https://github.com/curl/curl/discussions/11878
Closes https://github.com/curl/curl/pull/11858
- bring bearssl handshake times down from +200ms down to other TLS backends
- vtls: improve generic get_select_socks() implementation
- tests: provide Apache with a suitable ssl session cache
Closes#11675
We remove support for building curl with gskit.
- This is a niche TLS library, only running on some IBM systems
- no regular curl contributors use this backend
- no CI builds use or verify this backend
- gskit, or the curl adaption for it, lacks many modern TLS features
making it an inferior solution
- build breakages in this code take weeks or more to get detected
- fixing gskit code is mostly done "flying blind"
This removal has been advertized in DEPRECATED in Jan 2, 2023 and it has
been mentioned on the curl-library mailing list.
It could be brought back, this is not a ban. Given proper effort and
will, gskit support is welcome back into the curl TLS backend family.
Closes#11460
Rename `close` and `connect` in `struct Curl_cftype` for
consistency and to avoid clashes with macros of the same name
(the standard AmigaOS networking connect() function is implemented
via a macro).
Closes#11491
- fix HTTP/2 check to not declare a connection dead when
the read attempt results in EAGAIN
- add H2-PROXY alive check as for HTTP/2 that was missing
and is needed
- add attach/detach around Curl_conn_is_alive() and remove
these in filter methods
- add checks for number of connections used in some test_10
proxy tunneling tests
Closes#11368
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
- with `--proxy-http2` allow h2 ALPN negotiation to
forward proxies
- applies to http: requests against a https: proxy only,
as https: requests will auto-tunnel
- adding a HTTP/1 request parser in http1.c
- removed h2h3.c
- using new request parser in nghttp2 and all h3 backends
- adding test 2603 for request parser
- adding h2 proxy test cases to test_10_*
scorecard.py: request scoring accidentally always run curl
with '-v'. Removed that, expect double numbers.
labeller: added http1.* and h2-proxy sources to detection
Closes#10967
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
- eliminate receive loop in vtls to fill buffer. This may
lead to partial reads of data which is counter productive
- let http2 instead loop smarter to process pending network
data without transfer switches
scorecard improvements
- do not start caddy when only httpd is requested
- allow curl -v to stderr file on --curl-verbose
Closes#10891
SSL backends like OpenSSL/wolfSSL and other return the content of one
TLS record on read, but usually there are more available.
Change the vtls cfilter recv() function to fill the given buffer until a
read would block.
Closes#10736
- add parameter to `conn_is_alive()` cfilter method that returns
if there is input data waiting on the connection
- refrain from re-using connnection from the cache that have
input pending
- adapt http/2 and http/3 alive checks to digest pending input
to check the connection state
- remove check_cxn method from openssl as that was just doing
what the socket filter now does.
- add tests for connection reuse with special server configs
Closes#10690
- time_connect was not updated when the overall connection failed,
e.g. when SSL verification was unsuccessful, refs #10670
- rework gather those values to interrogate involved filters,
also from all eyeballing attempts, to report the maximum of
those values.
- added 3 test cases in test_06 to check reported values on
successful, partially failed and totally failed connections.
Reported-by: Master Inspire
Fixes#10670Closes#10671
- refs #10646 where reuse was attempted on closed connections in the
cache, leading to an exhaustion of retries on a transfer
- the mistake was that poll events like POLLHUP, POLLERR, etc
were regarded as "not dead".
- change cf-socket filter check to regard such events as inidication
of corpsiness.
- vtls filter checks: fixed interpretation of backend check result
when inconclusive to interrogate status further down the filter
chain.
Reported-by: SendSonS on github
Fixes#10646Closes#10652
I believe the code was secure before this, but limiting the accepted
name length to what is used in the structures should help Coverity's
analysis.
Closes#10431
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
- by using BIT() instead of bool
- imap: shrink struct
- ftp: make state 'unsigned char'
- ftp: sort ftp_conn struct entries on size
- urldata: use smaller fields for SSL version info storage
- pop3: reduce the pop3_conn struct size
- smtp: reduce the size of the smtp structs
Closes#10186
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
The only TLS auth type libcurl ever supported is SRP and that is the
default type. Since nobody ever sets any other type, there is no point
in wasting space to store the set type and code to check the type.
If TLS auth is used, SRP is now implied.
Closes#10181
