- connect to DNS names with trailing dot
- connect to DNS names with double trailing dot
- rustls, always give `peer->hostname` and let it
figure out SNI itself
- add SNI tests for ip address and localhost
- document in code and TODO that QUIC with ngtcp2+wolfssl
does not do proper peer verification of the certificate
- mbedtls, skip tests with ip address verification as not
supported by the library
Closes#13486
- add session with destructor callback
- remove vtls `session_free` method
- let `Curl_ssl_addsessionid()` take ownership
of session object, freeing it also on failures
- change tls backend use
- test_17, add tests for SSL session resumption
Closes#13386
- fix flow handling in ngtcp2 to ACK data on streams
we abort ourself.
- extend test_02_23* cases to also run for h3
- skip test_02_23* for OpenSSL QUIC as it gets stalled
on progressing the connection
Closes#13374
A transfer with a completed download that is still uploading needs to
check the connection state when it is PAUSEd, since connection
close/errors would otherwise go unnoticed.
Reported-by: Sergey Bronnikov
Fixes#13260Closes#13271
- curl's transfer handling may write 0-length chunks at the end of the
download with an EOS flag. (HTTP/2 does this commonly)
- content encoders need to pass-through such a write and not count this
as error in case they are finished decoding
Fixes#13209Fixes#13212Closes#13219
Move all handling of HTTP's `Expect: 100-continue` feature into a client
reader. Add sending flag `KEEP_SEND_TIMED` that triggers transfer
sending on general events like a timer.
HTTP installs a `CURL_CR_PROTOCOL` reader when announcing `Expect:
100-continue`. That reader works as follows:
- on first invocation, records time, starts the `EXPIRE_100_TIMEOUT`
timer, disables `KEEP_SEND`, enables `KEEP_SEND_TIMER` and returns 0,
eos=FALSE like a paused upload.
- on subsequent invocation it checks if the timer has expired. If so, it
enables `KEEP_SEND` and switches to passing through reads to the
underlying readers.
Transfer handling's `readwrite()` will be invoked when a timer expires
(like `EXPIRE_100_TIMEOUT`) or when data from the server arrives. Seeing
`KEEP_SEND_TIMER`, it will try to upload more data, which triggers
reading from the client readers again. Which then may lead to a new
pausing or cause the upload to start.
Flags and timestamps connected to this have been moved from
`SingleRequest` into the reader's context.
Closes#13110
- when data arrived in several chunks, the collection into
the passed buffer always started at offset 0, overwriting
the data already there.
adding test_20_07 to verify fix
- debug environment var CURL_WS_CHUNK_SIZE can be used to
influence the buffer chunk size used for en-/decoding.
Closes#12945
- add test_05_04 for requests using http/1.0, http/1.1 and h2 against an
Apache resource that does an unclean TLS shutdown.
- revert special workarund in openssl.c for suppressing shutdown errors
on multiplexed connections
- vlts.c restore to its state before 9a90c9dd64Fixes#12885Fixes#12844Closes#12848
- improve info logging when peer verification fails to indicate
if DNS name or ip address has been tried to match
- add test case for contacting https proxy with ip address
- add pytest env check on loaded credentials and re-issue
when they are no longer valid
- disable proxy ip address test for bearssl, since not supported there
Ref: #12831Closes#12838
- HTTP/3 for curl using OpenSSL's own QUIC stack together
with nghttp3
- configure with `--with-openssl-quic` to enable curl to
build this. This requires the nghttp3 library
- implementation with the following restrictions:
* macOS has to use an unconnected UDP socket due to an
issue in OpenSSL's datagram implementation
See https://github.com/openssl/openssl/issues/23251
This makes connections to non-reponsive servers hang.
* GET requests will send the indicator that they have
no body in a separate QUIC packet. This may result
in processing delays or Transfer-Encodings on proxied
requests
* uploads that encounter blocks will use 100% cpu as
detection of these flow control issue is not working
(we have not figured out to pry that from OpenSSL).
Closes#12734
- add test cases for rate limiting uploads for all
http versions
- fix transfer loop handling of limits. Signal a re-receive
attempt only on exhausting maxloops without an EAGAIN
- fix `data->state.selectbits` forcing re-receive to also
set re-sending when transfer is doing this.
Reported-by: Karthikdasari0423 on github
Fixes#12559Closes#12586
- there seems to be a code path that cleans up easy handles without
triggering DONE or DETACH events to the connection filters. This
would explain wh nghttp2 still holds stream user data
- add GOOD check to easy handle used in on_close_callback to
prevent crashes, ASSERTs in debug builds.
- NULL the stream user data early before submitting RST
- add checks in on_stream_close() to identify UNGOOD easy handles
Reported-by: Hans-Christian Egtvedt
Fixes#10936Closes#12562
- tunnel https proxy used for http: transfers does
no check if proxy-ssl configuration matches
- test cases added, test_10_12 fails on 8.4.0
Closes#12255
Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
- refs #11982 where it was noted that paused transfers may
close successfully without delivering the complete data
- made sample poc into tests/http/client/h2-pausing.c and
added test_02_27 to reproduce
Closes#11989Fixes#11982
Reported-by: Harry Sintonen
- set CURL_CI for pytest runs in CI environments
- exclude timing sensitive tests from CI runs
- for failed results, list only the log and stat of
the failed transfer
- fix type in http.c comment
Closes#11812
- added test cases for various code paths
- fixed handling of blocked write when stream had
been closed inbetween attempts
- re-enabled DEBUGASSERT on send with smaller data size
- in debug builds, environment variables can be set to simulate a slow
network when sending data. cf-socket.c and vquic.c support
* CURL_DBG_SOCK_WBLOCK: percentage of send() calls that should be
answered with a EAGAIN. TCP/UNIX sockets.
This is chosen randomly.
* CURL_DBG_SOCK_WPARTIAL: percentage of data that shall be written
to the network. TCP/UNIX sockets.
Example: 80 means a send with 1000 bytes would only send 800
This is applied to every send.
* CURL_DBG_QUIC_WBLOCK: percentage of send() calls that should be
answered with EAGAIN. QUIC only.
This is chosen randomly.
Closes#11756
- delete completed TODO from `./CMakeLists.txt`.
- convert a C++ comment to C89 in `./CMake/CurlTests.c`.
- delete duplicate EOLs from EOF.
- add missing EOL at EOF.
- delete whitespace at EOL (except from expected test results).
- convert tabs to spaces.
- convert CRLF EOLs to LF in GHA yaml.
- text casing fixes in `./CMakeLists.txt`.
- fix a codespell typo in `packages/OS400/initscript.sh`.
Closes#11772
- bring bearssl handshake times down from +200ms down to other TLS backends
- vtls: improve generic get_select_socks() implementation
- tests: provide Apache with a suitable ssl session cache
Closes#11675
- check in h2 filter recv that stream actually exists
and return error if not
- add test for parallel, extreme h2 upgrades that fail if
connections get reused before fully switched
- add h2 upgrade upload test just for completeness
Closes#11563
- fix HTTP/2 check to not declare a connection dead when
the read attempt results in EAGAIN
- add H2-PROXY alive check as for HTTP/2 that was missing
and is needed
- add attach/detach around Curl_conn_is_alive() and remove
these in filter methods
- add checks for number of connections used in some test_10
proxy tunneling tests
Closes#11368
- refs #11357, where it was reported that HTTP/1.1 downgrades
no longer works
- fixed with suggested change
- added test_05_03 and a new handler in the curltest module
to reproduce that downgrades work
Fixes#11357Closes#11362
Reported-by: Jay Satiro
- refs #11203 where hyper was reported as being slow
- fixes hyper_executor_poll to loop until it is out of
tasks as advised by @seanmonstar in https://github.com/hyperium/hyper/issues/3237
- added a fix in hyper io handling for detecting EAGAIN
- added some debug logs to see IO results
- pytest http/1.1 test cases pass
- pytest h2 test cases fail on connection reuse. HTTP/2
connection reuse does not seem to work. Hyper submits
a request on a reused connection, curl's IO works and
thereafter hyper declares `Hyper: [1] operation was canceled: connection closed`
on stderr without any error being logged before.
Fixes#11203
Reported-by: Gisle Vanem
Advised-by: Sean McArthur
Closes#11344
- doing a POST with `--digest` does an override on the initial request
with `Content-Length: 0`, but the http2 filter was unaware of that
and expected the originally request body. It did therefore not
send a final DATA frame with EOF flag to the server.
- The fix overrides any initial notion of post size when the `done_send`
event is triggered by the transfer loop, leading to the EOF that
is necessary.
- refs #11194. The fault did not happen in testing, as Apache httpd
never tries to read the request body of the initial request,
sends the 401 reply and closes the stream. The server used in the
reported issue however tried to read the EOF and timed out on the
request.
Reported-by: Aleksander Mazur
Fixes#11194
Cloes #11200
- Makefile support for building test specific clients in tests/http/clients
- auto-make of clients when invoking pytest
- added test_09_02 for server PUSH_PROMISEs using clients/h2-serverpush
- added test_02_21 for lib based downloads and pausing/unpausing transfers
curl url parser:
- added internal method `curl_url_set_authority()` for setting the
authority part of a url (used for PUSH_PROMISE)
http2:
- made logging of PUSH_PROMISE handling nicer
Placing python test requirements in requirements.txt files
- separate files to base test suite and http tests since use
and module lists differ
- using the files in the gh workflows
websocket test cases, fixes for we and bufq
- bufq: account for spare chunks in space calculation
- bufq: reset chunks that are skipped empty
- ws: correctly encode frames with 126 bytes payload
- ws: update frame meta information on first call of collect
callback that fills user buffer
- test client ws-data: some test/reporting improvements
Closes#11006
- with `--proxy-http2` allow h2 ALPN negotiation to
forward proxies
- applies to http: requests against a https: proxy only,
as https: requests will auto-tunnel
- adding a HTTP/1 request parser in http1.c
- removed h2h3.c
- using new request parser in nghttp2 and all h3 backends
- adding test 2603 for request parser
- adding h2 proxy test cases to test_10_*
scorecard.py: request scoring accidentally always run curl
with '-v'. Removed that, expect double numbers.
labeller: added http1.* and h2-proxy sources to detection
Closes#10967
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
- eliminate receive loop in vtls to fill buffer. This may
lead to partial reads of data which is counter productive
- let http2 instead loop smarter to process pending network
data without transfer switches
scorecard improvements
- do not start caddy when only httpd is requested
- allow curl -v to stderr file on --curl-verbose
Closes#10891
- when rustls is told to recieve more TLS data and its internal
plaintext buffers are full, it returns an IOERROR
- avoid receiving TLS data while plaintext is not read empty
pytest:
- increase curl run timeout when invoking pytest with higher verbosity
Closes#10876
- use bufq for send/receive of network data
- usd bufq for send/receive of stream data
- use HTTP/2 flow control with no-auto updates to control the
amount of data we are buffering for a stream
HTTP/2 stream window set to 128K after local tests, defined
code constant for now
- elminiating PAUSEing nghttp2 processing when receiving data
since a stream can now take in all DATA nghttp2 forwards
Improved scorecard and adjuste http2 stream window sizes
- scorecard improved output formatting and options default
- scorecard now also benchmarks small requests / second
Closes#10771
- will check built curl for http and https support and
skip all tests if not there
- will dump stdout/stderr/trace output on errored responses
Closes#10829
- we had a CI case once where `curl` seemingly did not
return and it was hard to guess what happened.
- make curl execution in test cases time out after 60 seconds
Closes#10783
- added to: ngtcp2-quictls, ngtcp2-gnutls and the linux varians
quiche, bearssl, libressl, mbedtls, openssl3, rustls
- added disabled in ngtcp2-wolfssl due to weird SSL_connect() errors
not reproducable locally
Improvements on pytest:
- handling of systems with nghttpx in $PATH
- configure will seach $PATH got nghttpx used in pytest
- pytest fixes for managing nghttpx without h3 support
- ngtcp2-wolfssl: use a fully enabled wolfssl build
- lower parallel count for http/1.1 tests, since we do not
want to test excessive connections.
- check built curl for HTTPS-proxy support in proxy tests
- bearssl does not like one of our critical cert extensions, making
it non-critical now
- bearssl is too slow for test_12, skipping
- making sure we do h3 tests only when curl and server support is there
Closes#10699
- add parameter to `conn_is_alive()` cfilter method that returns
if there is input data waiting on the connection
- refrain from re-using connnection from the cache that have
input pending
- adapt http/2 and http/3 alive checks to digest pending input
to check the connection state
- remove check_cxn method from openssl as that was just doing
what the socket filter now does.
- add tests for connection reuse with special server configs
Closes#10690
- necessary ports are bound at start of test suite and then
given to server fixtures for use.
- this make parallel use of pytest (in separate directories),
practically safe for use as OS tend to not reuse such port numbers
for a while
Closes#10692
- httpd is only one server we test with
- the suite coveres the HTTP protocol in general where
the default test cases need a more beefy environment
Closes#10654
