Count connections to a host against a possibly configured destination
limit. Trigger multi `connchange` when a connection has been shutdown,
so pending transfers can try to get a connection once again.
Reported-by: baranyaib90 on github
Fixes#15857Closes#15879
When a QUIC TLS session announced early data support and
'CURLSSLOPT_EARLYDATA' is set for the transfer, send initial request and
body (up to the 128k we buffer) as 0RTT when curl is built with
ngtcp2+gnutls.
QUIC 0RTT needs not only the TLS session but the QUIC transport
paramters as well. Store those and the earlydata max value together with
the session in the cache.
Add test case for h3 use of this. Enable quic early data in nghttpx for
testing.
Closes#15667
Described in detail in internal doc TLS-SESSIONS.md
Main points:
- use a new `ssl_peer_key` for cache lookups by connection filters
- recognize differences between TLSv1.3 and other tickets
* TLSv1.3 tickets are single-use, cache can hold several of them for a peer
* TLSv1.2 are reused, keep only a single one per peer
- differentiate between ticket BLOB to store (that could be persisted) and object instances
- use put/take/return pattern for cache access
- remember TLS version, ALPN protocol, time received and lifetime of ticket
- auto-expire tickets after their lifetime
Closes#15774
Add test_02_33 to run with various values for the multi option
CURLMOPT_MAX_HOST_CONNECTIONS and CURLOPT_FRESH_CONNECT to trigger
connection pool limit handling code.
Closes#15494
Changes to make a curl built with OpenSSL + GnuTLS to run successfully
in our pytests. Run
CURL_SSL_BACKEND=openssl pytest
to test a TLS backend other than the default.
Closes#15443
Use session cache for QUIC when built with quictls or wolfSSL.
Add test_017_10 for verifying QUIC TLS session reuse when built with
quictls, gnutls or wolfssl.
Closes#15358
Add length to session saves, making it clear that we are storing a byte
blob and allowing memcmp() on sameness check.
Remove some pytest skips for bearssl to see if they now work properly in
CI.
Closes#15395
We used to include a special mod_h2 in our CI that supports the
directive H2MaxDataFrameLen for test_02_20. Since then, ubuntu-lastest
includes a more recent apache httpd. Let's see if we can live without
the special.
Closes#15353
Add session reuse for QUIC transfers using GnuTLS. This does not include
support for TLS early data, yet.
Fix check of early data support in common GnuTLS init code to not access
the filter context, as the struct varies between TCP and QUIC
connections.
Closes#15265
Based on #14135, implement TLSv1.3 earlydata support for the curl
command line, libcurl and its implementation in GnuTLS.
If a known TLS session announces early data support, and the feature is
enabled *and* it is not a "connect-only" transfer, delay the TLS
handshake until the first request is being sent.
- Add --tls-earldata as new boolean command line option for curl.
- Add CURLSSLOPT_EARLYDATA to libcurl to enable use of the feature.
- Add CURLINFO_EARLYDATA_SENT_T to libcurl, reporting the amount of
bytes sent and accepted/rejected by the server.
Implementation details:
- store the ALPN protocol selected at the SSL session.
- When reusing the session and enabling earlydata, use exactly
that ALPN protocol for negoptiation with the server. When the
sessions ALPN does not match the connections ALPN, earlydata
will not be enabled.
- Check that the server selected the correct ALPN protocol for
an earlydata connect. If the server does not confirm or reports
something different, the connect fails.
- HTTP/2: delay sending the initial SETTINGS frames during connect,
if not connect-only.
Verification:
- add test_02_32 to verify earlydata GET with nghttpx.
- add test_07_70 to verify earlydata PUT with nghttpx.
- add support in 'hx-download', 'hx-upload' clients for the feature
Assisted-by: ad-chaos on github
Closes#15211
Adds test cases to check that plain http: with HTTP/2 works
via 'Upgrade: h2c' or --http2-prior-knowledge'.
Also added tests to check connection reused in these situations.
Closes#14694
Update IP related information at the connection and the transfer in two
places only: once the filter chain connects and when a transfer is added
to a connection. The latter only updates on reuse when the filters
already are connected.
The only user of that information before a full connect is the HAProxy
filter. Add cfilter CF_QUERY_IP_INFO query to let it find the
information from the filters "below".
This solves two issues with the previous version:
- updates where often done twice with the same info
- happy eyeballing filter "forks" could overwrite each others
updates before the full winner was determined.
Closes#14699
(in debug-builds)
Fix implementation in curl using libuv to process parallel transfers.
Add pytest capabilities to run test cases with --test-event.
- fix uv_timer handling to carry correct 'data' pointing to uv context.
- fix uv_loop handling to reap and add transfers when possible
- fix return code when a transfer errored
Closes#14413
Fixes:
- in uds tests, abort also silently on os errors
- be conservative on the h3 goaway duration
- detect curl debug build and use in checks
- fix caddy version check for slight difference under linux
- set caddy default path fitting for linux
- fix deprecation warnings in valid time checks
FTP tests:
- add '--with-test-vsftpd=path' to configure
- use vsftpd default path suitable for linux
- add test_30 with plain FTP tests
- add test_31 with --ssl-reqd FTP tests
- add vsftpd to linux GHA for pytest workflows
Closes#13661
- errors returned by Curl_xfer_write_resp() and the header variant are
not errors in the protocol. The result needs to be returned on the
next recv() from the protocol filter.
- make xfer write errors for response data cause the stream to be
cancelled
- added pytest test_02_14 and test_02_15 to verify that also for
parallel processing
Reported-by: Laramie Leavitt
Fixes#13411Closes#13424
- fix flow handling in ngtcp2 to ACK data on streams
we abort ourself.
- extend test_02_23* cases to also run for h3
- skip test_02_23* for OpenSSL QUIC as it gets stalled
on progressing the connection
Closes#13374
- remember error encountered in invoking write callback and always fail
afterwards without further invokes
- check behaviour in test_02_17 with h2-pausing client
Reported-by: Pavel Kropachev
Fixes#13337Closes#13340
- When the writing of response data fails, reset the stream
and do not return a callback error to nghttp2. That would
be a fatal error for the connection and harm other requests.
- add test cases for various abort scenarios
Reported-by: Konstantin Kuzov
Fixes#13292Closes#13298
- curl's transfer handling may write 0-length chunks at the end of the
download with an EOS flag. (HTTP/2 does this commonly)
- content encoders need to pass-through such a write and not count this
as error in case they are finished decoding
Fixes#13209Fixes#13212Closes#13219
- refs #11982 where it was noted that paused transfers may
close successfully without delivering the complete data
- made sample poc into tests/http/client/h2-pausing.c and
added test_02_27 to reproduce
Closes#11989Fixes#11982
Reported-by: Harry Sintonen
- set CURL_CI for pytest runs in CI environments
- exclude timing sensitive tests from CI runs
- for failed results, list only the log and stat of
the failed transfer
- fix type in http.c comment
Closes#11812
- added test cases for various code paths
- fixed handling of blocked write when stream had
been closed inbetween attempts
- re-enabled DEBUGASSERT on send with smaller data size
- in debug builds, environment variables can be set to simulate a slow
network when sending data. cf-socket.c and vquic.c support
* CURL_DBG_SOCK_WBLOCK: percentage of send() calls that should be
answered with a EAGAIN. TCP/UNIX sockets.
This is chosen randomly.
* CURL_DBG_SOCK_WPARTIAL: percentage of data that shall be written
to the network. TCP/UNIX sockets.
Example: 80 means a send with 1000 bytes would only send 800
This is applied to every send.
* CURL_DBG_QUIC_WBLOCK: percentage of send() calls that should be
answered with EAGAIN. QUIC only.
This is chosen randomly.
Closes#11756
- check in h2 filter recv that stream actually exists
and return error if not
- add test for parallel, extreme h2 upgrades that fail if
connections get reused before fully switched
- add h2 upgrade upload test just for completeness
Closes#11563
- leave transfer loop when --limit-rate is in effect and has
been received
- adjust stream window size to --limit-rate plus some slack
to make the server observe the pacing we want
- add test case to confirm behaviour
Closes#11115
- nghttp2 does not free connection level window flow for
aborted streams
- when closing transfers, make sure that any buffered
response data is "given back" to the flow control window
- add tests test_02_22 and test_02_23 to reproduce
Closes#11052
- Makefile support for building test specific clients in tests/http/clients
- auto-make of clients when invoking pytest
- added test_09_02 for server PUSH_PROMISEs using clients/h2-serverpush
- added test_02_21 for lib based downloads and pausing/unpausing transfers
curl url parser:
- added internal method `curl_url_set_authority()` for setting the
authority part of a url (used for PUSH_PROMISE)
http2:
- made logging of PUSH_PROMISE handling nicer
Placing python test requirements in requirements.txt files
- separate files to base test suite and http tests since use
and module lists differ
- using the files in the gh workflows
websocket test cases, fixes for we and bufq
- bufq: account for spare chunks in space calculation
- bufq: reset chunks that are skipped empty
- ws: correctly encode frames with 126 bytes payload
- ws: update frame meta information on first call of collect
callback that fills user buffer
- test client ws-data: some test/reporting improvements
Closes#11006
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
- ngtcp2: using bufq for recv stream data
- internal stream_ctx instead of `struct HTTP` members
for quiche, ngtcp2 and msh3
- no more QUIC related members in `struct HTTP`
- experimental use of recvmmsg(), disabled by default
- testing on my old debian box shows no throughput improvements.
- leaving it in, but disabled, for future revisit
- vquic: common UDP receive code for ngtcp2 and quiche
- vquic: common UDP send code for ngtcp2 and quiche
- added pytest skips for known msh3 failures
- fix unit2601 to survive torture testing
- quiche: using latest `master` from quiche and enabling large download
tests, now that key change is supported
- fixing test_07_21 where retry handling of starting a stream
was faulty
- msh3: use bufq for recv buffering headers and data
- msh3: replace fprintf debug logging with LOG_CF where possible
- msh3: force QUIC expire timers on recv/send to have more than
1 request per second served
Closes#10772
- will check built curl for http and https support and
skip all tests if not there
- will dump stdout/stderr/trace output on errored responses
Closes#10829
- added to: ngtcp2-quictls, ngtcp2-gnutls and the linux varians
quiche, bearssl, libressl, mbedtls, openssl3, rustls
- added disabled in ngtcp2-wolfssl due to weird SSL_connect() errors
not reproducable locally
Improvements on pytest:
- handling of systems with nghttpx in $PATH
- configure will seach $PATH got nghttpx used in pytest
- pytest fixes for managing nghttpx without h3 support
- ngtcp2-wolfssl: use a fully enabled wolfssl build
- lower parallel count for http/1.1 tests, since we do not
want to test excessive connections.
- check built curl for HTTPS-proxy support in proxy tests
- bearssl does not like one of our critical cert extensions, making
it non-critical now
- bearssl is too slow for test_12, skipping
- making sure we do h3 tests only when curl and server support is there
Closes#10699
- httpd is only one server we test with
- the suite coveres the HTTP protocol in general where
the default test cases need a more beefy environment
Closes#10654
