Ubuntu has the `pkgconf` package installed by default that implements
the `pkg-config` command. Switch CI `apt` commands over to `pkgconf`
to avoid replacing it in every job run.
Avoids:
```
The following packages will be REMOVED:
pkgconf r-base-dev
The following NEW packages will be installed:
[...] pkg-config [...]
```
https://github.com/curl/curl/actions/runs/10949915766/job/30404126342?pr=14972#step:2:20Closes#14974
CI:
- GHA/windows: enable OpenSSH server, SysInternals `handle`, `impacket`.
Skip `impacket` on MSYS2 due to install failure.
Skip OpenSSH server for old/standalone mingw-w64 (building curl
without SSH there.)
- GHA/windows: make test tool installs a separate step.
- GHA/cygwin: enable OpenSSH server.
Skip `impacket`: it's compiling for 7 minutes then breaks.
Skip `stunnel` due to sluggish test run performance.
(This update is unrelated to Azure jobs.)
- GHA/linux: migrate Linux jobs from Azure CI.
- GHA/linux: migrate scanbuild job from Azure CI.
- GHA/linux: enable libssh2 in a job. Also enable valgrind.
- CI/windows: enable SSPI in two jobs.
- CI/windows: disable zlib in one more job.
- CI/windows: improve `if` condition checking GnuTLS.
- CI/windows: ignore SFTP/SCP tests as necessary.
- universally ignore SCP tests, they fail everywhere.
- ignore test 612.
- ignore test 613 616 618 with MSYS2 mingw-w64.
- ignore test 614 with libssh.
- ignore all SFTP with MSYS2 native.
- ignore all SFTP with vcpkg with `libssh2[core,zlib]`.
- ignore a couple of SFTP tests with MSYS2 mingw-w64.
(This matches settings on Azure CI.)
- GHA/windows: ignore failing 1451 'Basic SMB request' test for
old mingw-w64 7.3.0 (but not for 9.5.0!):
```
2024-09-11 21:45:59,738 ERROR smbComNegotiate: b'NT LM 0.12\x00' is not in list
[...]
curl: (7) Could not connect to server
[...]
FAIL 1451: 'Basic SMB request' SMB
```
Ref: https://github.com/curl/curl/actions/runs/10816280746/job/30007130770#step:13:3546
- CI/Azure: delete, now moved to GHA.
sshserver:
- sshserver: fix permissions for SSH host key on Windows, allowing sshd
to launch.
- sshserver: fix initializing config paths with Cygwin/MSYS2 sshd.
- sshserver: fix initializing config paths in parallel builds.
- sshserver: delete redundant `DenyUsers`. This also opens the way
to allow multiple usernames.
- sshserver: fix `AllowUsers` for GHA/windows, by allowing the
domainless username again.
Follow-up to 3ee7c676ec#5721
- sshserver: fix `Deprecated option` warnings in `sshd_config`:
```
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 7: Deprecated option AuthorizedKeysFile2
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 25: Deprecated option KeyRegenerationInterval
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 35: Deprecated option RhostsRSAAuthentication
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 36: Deprecated option RSAAuthentication
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 37: Deprecated option ServerKeyBits
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 41: Deprecated option UseLogin
```
- sshserver: fix `Deprecated option` warnings in `ssh_config` with
Cygwin/MSYS2.
- sshserver: fix dumping config files due to the filenames missing their
full paths.
- sshserver: add workaround to make `logmsg` messages visible.
Before this patch they only went to a file and never shown.
runtests:
- runtests: log details when these Windows commands are called:
`handle`, `taskkill`, `tasklist`.
- runtests: add documentation links to Windows tools:
`handle`, `taskkill`, `tasklist`, `icacls`.
- runtests: add `-t` (kill whole tree) option to `taskkill` in
`servers.pm`, syncing it with the other `taskkill` call.
Follow-up to bc72a78a11#14488
- runtests: show warning if Sysinternals `handle` tool is missing.
- runtests: drop Windows XP Home compatibility `tskill` call.
The call was made on all Windows versions. It's possibly overkill to
do this, because XP Home is probably rarely used for running curl
tests these days. In case it's needed, it'd be better to put it under
an explicit option.
- runtests: show Perl version and path.
Fix/silence fallouts:
- unit2603: fix building with disabled HTTP support.
- unit2604: silence `-Woverlength-strings` warnings in C89 mode.
- test437, test1614: fix to pass with no-IPv6 builds.
Closes#14859
There is a 4-5x difference in test run times. Make the reason more
obvious by adding valgrind to the job names.
Also:
- tidy up job names.
Closes#14853
- run tests via `make test-ci` instead of `make check` with autotools.
- add `x86_64` job for FreeBSD, with tests.
It matches the existing Cirrus CI job, with these differences:
- finishes 3x faster (thanks to parallel tests enabled).
- librtmp is not enabled because it's slated for removal by FreeBSD.
(already past the removal deadline, thought the package still
installs.)
- DICT and TELNET servers fail to start. Couldn't figure out why.
It means skipping test 1450 and 1452.
- it runs more tests, e.g. websockets and ip6-localhost.
- no `pkg update -f`.
- it misses the `CRYPTOGRAPHY_DONT_BUILD_RUST=1`, `pkg delete curl`,
`chmod 777`, `sudo -u nobody` and `sysctl net.inet.tcp.blackhole`
tricks. The latter is the default in these runners, the others did
not affect results.
- set `-j0` for tests in the NetBSD job. Flaky otherwise.
Closes#14244
- bump rest of the workflows (windows, macos, distrocheck).
- non-native virtualized envs have 2 CPUs, bump down accordingly.
(for `vmactions/omnios-vm` it's just a guess.)
- bump all to nproc + 1.
Follow-up to e838b341a0#12927Closes#13807
For better build performance. Dependency tracking causes a build
overhead while compiling to help a subsequent build, but in CI there is
never one and the extra work is discarded.
Closes#13794
PowerShell works (after a steep development curve), but one property of
it stuck and kept causing unresolvable usability issues: With
`$ErrorActionPreference=Stop`, it does abort on failures, but shows only
the first line of the error message. In `Continue` mode, it shows the
full error message, but doesn't stop on all errors. Another issue is
PowerShell considering any stderr output as if the command failed (this
has been improved in 7.2 (2021-Nov), but fixed versions aren't running
in CI and will not be for a long time in all test images.)
Thus, we're going with bash.
Also:
- use `-j2` with autotools tests, making them finish 5-15 minutes per
job faster.
- omit `POSIX_PATH_PREFIX`.
- use `WINDIR`.
- prefer forward slashes.
Follow-up to: 75078a415d#11999
Ref: #12444Fixes#12560Closes#12572
Most CI services provide at least two cores, so enable parallel make
jobs to take advantage of that for builds. Some dependencies aren't safe
to build in parallel so leave those as-is. Also, rename a few
workflows to eliminate duplicate names and provide a better idea what
they're about.
When a commit only contains tests, documentation, or cmake files, skip
those builds that aren't affected by those.
The file filters available on the CI services don't seem to allow
skipping individual jobs, only the entire workflow, so we can't get any
more fine-grained than this.
Also skip builds on non-Windows platforms when only Windows build files
have changed.
This should reduce the number of useless builds and the associated
waiting time and chance of spurious failures, freeing resources for
new PRs.
Closes#10742
A temporary error with a remote server shouldn't cause a CI run to fail.
Also, put a cap on the time to download to fail faster on a misbehaving
server or connection and use HTTP compression where possible to reduce
download times.
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Set top-level permissions to None on all workflows, setting per-job
permissions. This avoids that new jobs inherit unwanted permissions.
Discussion: https://curl.se/mail/lib-2022-11/0028.html
Signed-off-by: Diogo Teles Sant'Anna <diogoteles@google.com>
Closes#9928
Avoid letting outdated CI runs continue if a PR receives
new changes. Outside a PR we let them continue running
by tying the concurrency to the commit hash instead.
Also only let one CodeQL or Hacktoberfest job run at a time.
Other CI platforms we use have this build in, but GitHub
unfortunately neither by default nor with a simple option.
This saves CI resources and therefore a little energy.
Approved-by: Daniel Stenberg
Approved-by: Max Dymond
Closes#9533
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
- bump actions/checkout from 2 to 3
- bump actions/upload-artifact from 1 to 3
- bump github/codeql-actions from 1 to 2
- use version tag for actions/checkout
Closes#8843
