- add hex and octal parsers to the Curl_str_* family
- make curlx_strtoofft use these parsers
- remove all use of strtol() and strtoul() in library code
- generally use Curl_str_* more than strtoofft, for stricter parsing
- supports 64-bit universally, instead of 'long' which differs in size
between platforms
Extended the unit test 1664 to verify hex and octal parsing.
Closes#16336
Adds a `follow()` callback to protocol handlers, so they may decide how
to act on a `newurl` after a request has been done. This is optional.
This moves the HTTP code for handling redirects from multi.c to http.c
where it should be. If we ever add a protocol with its own logic, it
would install its own follow function.
Closes#16075
The variable `conn->httpversion` was used for several purposes and it
was unclear at which time the value represents what.
- rename `conn->httpversion` to `conn->httpversion_seen`
This makes clear that the variable only records the last
HTTP version seen on the connection - if any. And that it
no longer is an indication of what version to use.
- Change Alt-Svc handling to no longer modify `conn->httpversion`
but set `data->state.httpwant` for influencing the HTTP version
to use on a transfer.
- Add `data->req.httpversion_sent` to have a record of what
HTTP version was sent in a request
- Add connection filter type CF_TYPE_HTTP
- Add filter query `CF_QUERY_HTTP_VERSION` to ask what HTTP
filter version is in place
- Lookup filters HTTP version instead of using `conn->httpversion`
Test test_12_05 now switches to HTTP/1.1 correctly and the
expectations have been fixed.
Removed the connection fitler "is_httpN()" checks and using
the version query instead.
Closes#16073
Protocol handler option PROTOPT_SSL is used to setup a connection
filters. Once that is done, used `Curl_conn_is_ssl()` to check if
a connection uses SSL.
There may be other reasons to add SSL to a connection, e.g. starttls.
Closes#16034
The TE request header field is invalid in HTTP/2. Since clients may not
know in advance if a connection negotiates HTTP/2, automatically strip
such a header when h2 is in play.
Add test_01_10 to verify.
Reported-by: Jiri Stary
Fixes#15941Closes#15943
- Treat negative Retry-After date-based times as 0.
- Treat Retry-After times greater than 6 hours as 6 hours.
Prior to this change Retry-After did not have a limited range and the
server could have set a time greater than 6 hours or a date in the past
that would result in a negative time, either of which may be unexpected
by the user.
The 6 hour limit is purposely not documented so that it can be changed
in the future if necessary.
Closes https://github.com/curl/curl/pull/15833
lib : remove all hyper code
configure: stop detecting hyper
docs: no more mention of hyper
tests: mo more special-handling of hyper builds
CI: no jobs using hyper
Closes#15120
`Makefile.mk` supported MS-DOS and Amiga, but `./configure` also
supported them in a better tested and more flexible way.
This patch also adds CMake support for MS-DOS/DJGPP and Amiga OS 3.
`Makefile.mk` was not maintained. Delete it in favour of first-tier
build methods.
Also include some non-MS-DOS/AmigaOS-specific tidy-up, see details at
the end of this message.
Details:
- fix/silence all MS-DOS/DJGPP build warnings and issues.
- add MS-DOS support to cmake.
- default to `ENABLE_THREADED_RESOLVER=OFF` for MS-DOS.
- add support for `WATT_ROOT`.
- use static libcurl with MS-DOS.
- fixup default CMake suffixes/prefixes for DJGPP.
- disable hidden symbols for MS-DOS. Not supported on MS-DOS.
- opt-in MS-DOS into `USE_UNIX_SOCKETS`.
- improve MS-DOS support in autotools.
- default to `--disable-threaded-resolver` for MS-DOS.
- make sure to use `close_s()` (from Watt-32) with autotools and cmake.
`Makefile.mk` used it before this patch.
- GHA: add DJGPP cmake (~30s) and autotools (~60s) build jobs.
Also build tests and examples with cmake.
- improve AmigaOS support in autotools:
- configure: detect `CloseSocket()` when it's a macro.
- configure: fix `IoctlSocket` detection on AmigaOS.
- curl-amissl.m4: pass AmiSSL libs to tests/servers.
- add AmigaOS3 support to cmake:
- cmake: fix `HAVE_IOCTLSOCKET_CAMEL` and
`HAVE_IOCTLSOCKET_CAMEL_FIONBIO` detections.
- set necessary system libs.
- add AmiSSL support.
- inet_ntop, inet_pton: fix using it for AmigaOS. cmake detects them,
and they did not compile with AmigaOS.
- cmake: better sync `gethostname` detection with autotools.
Fixes detection for AmigaOS, where `gethostname` is a macro.
- cmake: fix `sys/utime.h` detection on AmigaOS.
- cmake: force-disable `getaddrinfo` for AmigaOS.
- cmake: tweak threading and static/shared default for AmigaOS.
- cmake: rely on manual variable `AMIGA` to enable the platform.
- GHA: add AmigaOS cmake and autotools (~45s) jobs.
Also build tests and examples with cmake.
- INSTALL: update MS-DOS and AmigaOS build instructions.
- amigaos: fix `-Wpointer-sign` and
`zero or negative size array '_args'` in `Printf()`.
- amigaos: fix `-Wpointer-sign`
- amigaos: fix `-Wredundant-decls` `errno` and `h_errno`.
- amigaos: brute-force silence `lseek()` size warnings.
- amigaos: server/resolve: silence `-Wdiscarded-qualifiers`.
- amigaos: server/resolve: fix `-Wpointer-sign`.
- amigaos: fix `CURL_SA_FAMILY_T` type.
- nonblock: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
`ioctl` is also detected, but fails when used. Make the above override
it for a successful build.
Authored-by: Darren Banfi
Fixes#15537Closes#15603
- tftpd: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
- tftpd: tidy-up conditional code.
- curl: set stack size to 16384 for AmigaOS3/4
Overriding the default 4096.
Suggested-by: Darren Banfi
Ref: https://github.com/curl/curl/pull/15543#issuecomment-2498783123
Ref: https://wiki.amigaos.net/wiki/Controlling_Application_Stack
- functypes.h: fix `SEND_QUAL_ARG2` for AmigaOS.
- tftp: add missing cast in sendto() call for AmigaOS.
- getinfo: fix warning with AmigaOS.
- tool_operate: silence warning with AmigaOS
- amigaos: fix building libtests due to missing `RLIMIT_NOFILE`.
- curl_gethostname: silence warning for AmigaOS.
- ftp: silence `-Wtype-limits` for AmigaOS.
- libtest: fix timeval initialization for AmigaOS.
- examples: fix `timeval` initialization for AmigaOS.
- examples: silence warning for AmigaOS.
- configure: fix IPv6 detection for cross-builds.
- netrc: fix to build with AmigaOS cleanly.
- buildinfo: detect and add `DOS` tag for MS-DOS builds.
- buildinfo: add `AMIGA` to buildinfo.txt in auttools.
- build: move `USE_WATT32` macro definition to cmake/configure.
Non-MS-DOS/AmigeOS-specific tidy-ups:
- configure: sync `sa_family_t` detection with cmake.
- configure: sync `ADDRESS_FAMILY` detection signals with cmake.
- doh: use `CURL_SA_FAMILY_T`.
- lib: drop mingw-specific `CURL_SA_FAMILY_T` workaround.
- cmake: extend instead of override check-specific
configurations/requirements.
This allows to honor global requirements added earlier.
Necessary for AmigaOS for example.
- cmake: omit warning on disabled IPv6 for MS-DOS and AmigaOS.
No IPv6 support on these platforms. Also sync with autotools.
- lib1960: use libcurl `inet_pton()` wrapper.
- cmake: detect LibreSSL (to match autotools).
- cmake: say the specific OpenSSL flavour detected.
- hostip: add missing `HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID` guard.
- lib: simplify classic mac feature guards.
Follow-up to a8861b6ccd#9764Closes#15543
- split the huge Curl_cookie_add() into several smaller static functions
- switch to using the common llist instead of custom linked list
- use less memory for *getlist()
- use bitfields for flags in the Cookie struct
- avoid the copy for date parsing
- more consistent variable naming
Closes#15247
Normally, when a connection's filters have all connected, the
multiplex status is determined. However, HTTP/2 Upgrade:
requests will only do this when the first server response
has been received.
The current connection reuse mechanism does not accomodate
that and when the time between connect and response is large
enough, connection reuse may not happen as desired.
See test case 2405 failures, such as in
https://github.com/curl/curl/actions/runs/10629497461/job/29467166451
Add 'conn->bits.asks_multiplex' as indicator that a connection is
still being evaluated for mulitplexing, so that new transfers
may wait on this to be cleared.
Closes#14739
When we downloaded all we wanted, and we did not want a response body,
and no Trailer: has been announced, and the receive gives EAGAIN, do not
hang around unnecessarily.
Some servers are buggy in HEAD processing and fail to send the HTTP/2
EOS. Since we do not need any more data, end the request right there.
This will cause us to send a RST_STREAM to the server.
Fixes#14670
Reported-by: Gruber Glass
Closes#14685
This is a better match for what they do and the general "cpool"
var/function prefix works well.
The pool now handles very long hostnames correctly.
The following changes have been made:
* 'struct connectdata', e.g. connections, keep new members
named `destination` and ' destination_len' that fully specifies
interface+port+hostname of where the connection is going to.
This is used in the pool for "bundling" of connections with
the same destination. There is no limit on the length any more.
* Locking: all locks are done inside conncache.c when calling
into the pool and released on return. This eliminates hazards
of the callers keeping track.
* 'struct connectbundle' is now internal to the pool. It is no
longer referenced by a connection.
* 'bundle->multiuse' no longer exists. HTTP/2 and 3 and TLS filters
no longer need to set it. Instead, the multi checks on leaving
MSTATE_CONNECT or MSTATE_CONNECTING if the connection is now
multiplexed and new, e.g. not conn->bits.reuse. In that case
the processing of pending handles is triggered.
* The pool's init is provided with a callback to invoke on all
connections being discarded. This allows the cleanups in
`Curl_disconnect` to run, wherever it is decided to retire
a connection.
* Several pool operations can now be fully done with one call.
Pruning dead connections, upkeep and checks on pool limits
can now directly discard connections and need no longer return
those to the caller for doing that (as we have now the callback
described above).
* Finding a connection for reuse is now done via `Curl_cpool_find()`
and the caller provides callbacks to evaluate the connection
candidates.
* The 'Curl_cpool_check_limits()' now directly uses the max values
that may be set in the transfer's multi. No need to pass them
around. Curl_multi_max_host_connections() and
Curl_multi_max_total_connections() are gone.
* Add method 'Curl_node_llist()' to get the llist a node is in.
Used in cpool to verify connection are indeed in the list (or
not in any list) as they need to.
I left the conncache.[ch] as is for now and also did not touch the
documentation. If we update that outside the feature window, we can
do this in a separate PR.
Multi-thread safety is not achieved by this PR, but since more details
on how pools operate are now "internal" it is a better starting
point to go for this in the future.
Closes#14662
- Renames Curl_readwrite() to Curl_sendrecv() to reflect that it
is mainly about talking to the server, not reads or writes to the
client. Add a `nowp` parameter since the single caller already
has this.
- Curl_sendrecv() now runs all possible operations whenever it is
called and either it had been polling sockets or the 'select_bits'
are set.
POLL_IN/POLL_OUT are not always directly related to send/recv
operations. Filters like HTTP/2, QUIC or TLS may monitor reverse
directions. If a transfer does not want to send (KEEP_SEND), it
will not do so, as before. Same for receives.
- Curl_update_timer() now checks the absolute timestamp of an expiry
and the last/new timeout to determine if the application needs
to stop/start/restart its timer. This fixes edge cases where
updates did not happen as they should have.
- improved --test-event curl_easy_perform() simulation to handle
situations where no sockets are registered but a timeout is
in place.
- fixed bug in events_socket() that complained about removing
a socket that was unknown, when indeed it had removed the socket
just before, only it was the last in the list
- fixed conncache's internal handle to carry the multi instance
(where the cache has one) so that operations on the closure handle
trigger event callbacks correctly.
- fixed conncache to not POLL_REMOVE a socket twice when a conneciton
was closed.
Closes#14561
- Turned them all into functions to also do asserts etc.
- The llist related structs got all their fields renamed in order to make
sure no existing code remains using direct access.
- Each list node struct now points back to the list it "lives in", so
Curl_node_remove() no longer needs the list pointer.
- Rename the node struct and some of the access functions.
- Added lots of ASSERTs to verify API being used correctly
- Fix some cases of API misuse
Add docs/LLIST.md documenting the internal linked list API.
Closes#14485
Since data can be held in connection filter buffers when sending gives
EAGAIN, add methods to query this and perform flushing of those buffers.
The transfer loop will continue sending until all upload data is
processed and the connection is flushed.
- add `CF_QUERY_SEND_PENDING` to query filters
- add `CF_CTRL_DATA_SEND_FLUSH` to flush filters
- change `Curl_req_want_send()` to query the connection
if it needs flushing
- use `Curl_req_want_send()` to determine the POLLOUT
in the PERFORMING multi state
- implement flush handling in the HTTP/2 connection filter
Closes#14271
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
- When a transfer sets `data->state.select_bits`, it is
scheduled for rerun with EXPIRE_NOW. If such a transfer
is blocked (due to PAUSE, for example), this will lead to
a busy loop.
- multi.c: check for transfer block
- sendf.*: add Curl_xfer_is_blocked()
- sendf.*: add client reader `is_paused()` callback
- implement is_paused()` callback where needed
Closes#13908
- clarify Curl_xfer_setup() with RECV/SEND flags and different calls for
which socket they operate on. Add a shutdown flag for secondary
sockets
- change Curl_xfer_setup() calls to new functions
- implement non-blocking connection shutdown at the end of receiving or
sending a transfer
Closes#13913
`CURLDEBUG` is meant to enable memory tracking, but in a bunch of cases,
it was protecting debug features that were supposed to be guarded with
`DEBUGBUILD`.
Replace these uses with `DEBUGBUILD`.
This leaves `CURLDEBUG` uses solely for its intended purpose: to enable
the memory tracking debug feature.
Also:
- autotools: rely on `DEBUGBUILD` to enable `checksrc`.
Instead of `CURLDEBUG`, which worked in most cases because debug
builds enable `CURLDEBUG` by default, but it's not accurate.
- include `lib/easyif.h` instead of keeping a copy of a declaration.
- add CI test jobs for the build issues discovered.
Ref: https://github.com/curl/curl/pull/13694#issuecomment-2120311894Closes#13718
- HEADERFUNCTIONS might inspect response properties like
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T on seeing the last header line. If
the line is being written before this is initialized, values are not
available.
- write the last header line late when analyzing a HTTP response so that
all information is available at the time of the writing.
- add test1485 to verify that CURLINFO_CONTENT_LENGTH_DOWNLOAD_T works
on seeing the last header.
Fixes#13752
Reported-by: Harry Sintonen
Closes#13757
- as reported in #13725, some servers wrongly send body bytes in
responses to a HEAD request. This used to be tolerated in curl
8.4 and before and leads to failed transfers in newer versions.
- restore previous behaviour for HTTP/1.1 and HTTP/2:
* 1.1: do not add 'Transfer-Encoding' writers from HEAD
responses. RFC 9112 says they do not apply.
* 2: when the transfer expects 'no_body', to not report stream
resets as error when all response headers have been received.
Reported-by: Jeroen Ooms
Fixes#13725Closes#13732
A connection that has seen an HTTP major version now refuses any other
major HTTP version in future responses. Previously, a HTTP/1.x
connection would just silently accept HTTP/2 or HTTP/3 in the status
lines as long as it had support for those built-in. It would then just
lead to confusion and badness.
Indirectly Spotted by CodeSonar which identified a duplicate assignment
in this function.
Add test 471 to verify
Closes#13421
Before this patch `lib/curl_setup.h` defined these two macros right
next to each other, then the source code used them interchangeably.
After this patch, `USE_HTTP3` guards all HTTP/3 / QUIC features.
(Like `USE_HTTP2` does for HTTP/2.) `ENABLE_QUIC` is no longer used.
This patch doesn't change the way HTTP/3 is enabled via autotools
or CMake. Builders who enabled HTTP/3 manually by defining both of
these macros via `CPPFLAGS` can now delete `-DENABLE_QUIC`.
Closes#13352
Reduced size of dynamically_allocated_data structure.
Reduced number of stored values in enum dupstring and enum dupblob. This
affects the reduced array placed in the UserDefined structure.
Closes#13188
- when an application forces HTTP/1.1 chunked transfer encoding
by setting the corresponding header and instructs curl to use
the CURLOPT_READFUNCTION, disregard any POST length information.
- this establishes backward compatibility with previous curl versions
Applications are encouraged to not force "chunked", but rather
set length information for a POST. By setting -1, curl will
auto-select chunked on HTTP/1.1 and work properly on other HTTP
versions.
Reported-by: Jeff King
Fixes#13229Closes#13257
- move code that triggers on end-of-response into separate function from
parsing
- simplify some headp/headerlen usage
- add `httpversion` to SingleRequest to indicate the version of the
current response
Closes#13134
Saving some cpu cycles in http response header processing:
- pass the length of the header line along
- use string constant sizeof() instead of strlen()
- check line length if prefix is possible
- switch on first header char to limit checks
Closes#13143
