- add hex and octal parsers to the Curl_str_* family
- make curlx_strtoofft use these parsers
- remove all use of strtol() and strtoul() in library code
- generally use Curl_str_* more than strtoofft, for stricter parsing
- supports 64-bit universally, instead of 'long' which differs in size
between platforms
Extended the unit test 1664 to verify hex and octal parsing.
Closes#16336
Count connections to a host against a possibly configured destination
limit. Trigger multi `connchange` when a connection has been shutdown,
so pending transfers can try to get a connection once again.
Reported-by: baranyaib90 on github
Fixes#15857Closes#15879
- Make curl_multi_waitfds consistent with the documentation.
Issue Addressed:
- The documentation of curl_multi_waitfds indicates that users should
be able to call curl_multi_waitfds with a NULL ufds. However, before
this change, the function would return CURLM_BAD_FUNCTION_ARGUMENT.
- Additionally, the documentation suggests that users can use this
function to determine the number of file descriptors (fds) needed.
However, the function would stop counting fds if the supplied fds
were exhausted.
Changes Made:
- NULL ufds Handling: curl_multi_waitfds can now accept a NULL ufds if
size is also zero.
- Counting File Descriptors: If curl_multi_waitfds is passed a NULL
ufds, or the size of ufds is insufficient, the output parameter
fd_count will return the number of fds needed. This value may be
higher than actually needed but never lower.
Testing:
- Test 2405 has been updated to cover the usage scenarios described
above.
Fixes https://github.com/curl/curl/issues/15146
Closes https://github.com/curl/curl/pull/15155
When the pool is cleaned up due to host limits, the bundle may be
cleaned up as well making the old pointer invalid.
Fixes#15185
Reported-by: Moritz Knüsel
Closes#15186
booleans should use the type 'bool' and set the value to TRUE/FALSE
non-booleans should not be 'bool' and should not set the value to
TRUE/FALSE
Closes#15123
This is a better match for what they do and the general "cpool"
var/function prefix works well.
The pool now handles very long hostnames correctly.
The following changes have been made:
* 'struct connectdata', e.g. connections, keep new members
named `destination` and ' destination_len' that fully specifies
interface+port+hostname of where the connection is going to.
This is used in the pool for "bundling" of connections with
the same destination. There is no limit on the length any more.
* Locking: all locks are done inside conncache.c when calling
into the pool and released on return. This eliminates hazards
of the callers keeping track.
* 'struct connectbundle' is now internal to the pool. It is no
longer referenced by a connection.
* 'bundle->multiuse' no longer exists. HTTP/2 and 3 and TLS filters
no longer need to set it. Instead, the multi checks on leaving
MSTATE_CONNECT or MSTATE_CONNECTING if the connection is now
multiplexed and new, e.g. not conn->bits.reuse. In that case
the processing of pending handles is triggered.
* The pool's init is provided with a callback to invoke on all
connections being discarded. This allows the cleanups in
`Curl_disconnect` to run, wherever it is decided to retire
a connection.
* Several pool operations can now be fully done with one call.
Pruning dead connections, upkeep and checks on pool limits
can now directly discard connections and need no longer return
those to the caller for doing that (as we have now the callback
described above).
* Finding a connection for reuse is now done via `Curl_cpool_find()`
and the caller provides callbacks to evaluate the connection
candidates.
* The 'Curl_cpool_check_limits()' now directly uses the max values
that may be set in the transfer's multi. No need to pass them
around. Curl_multi_max_host_connections() and
Curl_multi_max_total_connections() are gone.
* Add method 'Curl_node_llist()' to get the llist a node is in.
Used in cpool to verify connection are indeed in the list (or
not in any list) as they need to.
I left the conncache.[ch] as is for now and also did not touch the
documentation. If we update that outside the feature window, we can
do this in a separate PR.
Multi-thread safety is not achieved by this PR, but since more details
on how pools operate are now "internal" it is a better starting
point to go for this in the future.
Closes#14662
- Renames Curl_readwrite() to Curl_sendrecv() to reflect that it
is mainly about talking to the server, not reads or writes to the
client. Add a `nowp` parameter since the single caller already
has this.
- Curl_sendrecv() now runs all possible operations whenever it is
called and either it had been polling sockets or the 'select_bits'
are set.
POLL_IN/POLL_OUT are not always directly related to send/recv
operations. Filters like HTTP/2, QUIC or TLS may monitor reverse
directions. If a transfer does not want to send (KEEP_SEND), it
will not do so, as before. Same for receives.
- Curl_update_timer() now checks the absolute timestamp of an expiry
and the last/new timeout to determine if the application needs
to stop/start/restart its timer. This fixes edge cases where
updates did not happen as they should have.
- improved --test-event curl_easy_perform() simulation to handle
situations where no sockets are registered but a timeout is
in place.
- fixed bug in events_socket() that complained about removing
a socket that was unknown, when indeed it had removed the socket
just before, only it was the last in the list
- fixed conncache's internal handle to carry the multi instance
(where the cache has one) so that operations on the closure handle
trigger event callbacks correctly.
- fixed conncache to not POLL_REMOVE a socket twice when a conneciton
was closed.
Closes#14561
- converted the Curl_hash_count() macro to a function
- Discourage accessing struct fields directly
- Document the internal API in HASH.md
Closes#14503
- Turned them all into functions to also do asserts etc.
- The llist related structs got all their fields renamed in order to make
sure no existing code remains using direct access.
- Each list node struct now points back to the list it "lives in", so
Curl_node_remove() no longer needs the list pointer.
- Rename the node struct and some of the access functions.
- Added lots of ASSERTs to verify API being used correctly
- Fix some cases of API misuse
Add docs/LLIST.md documenting the internal linked list API.
Closes#14485
Replace Curl_resolv_unlock() with Curl_resolv_unlink():
-replace inuse member with refcount in Curl_dns_entry
- pass Curl_dns_entry ** to unlink, so it gets always cleared
- solve potential (but unlikley) UAF in FTP's handling of looked up
Curl_dns_entry. Esp. do not use addr information after unlinking an entry.
In reality, the unlink will not free memory, as the dns entry is still
referenced by the hostcache. But this is not safe and relying on no other
code pruning the cache in the meantime.
- pass permanent flag when adding a dns entry instead of fixing timestamp
afterwards.
url.c: fold several static *resolve_* functions into one.
Closes#14195
connections being shutdown would register sockets for events, but then
never remove these sockets again. Nor would the shutdown effectively
been performed.
- If a socket event involves a transfer, check if that is the
connection cache internal handle and run its multi_perform()
instead (the internal handle is used for all shutdowns).
- When a timer triggers for a transfer, check also if it is
about the connection cache internal handle.
- During processing shutdowns in the connection cache, assess
the shutdown timeouts. Register a Curl_expire() of the lowest
value for the cache's internal handle.
Reported-by: Gordon Parke
Fixes#14280Closes#14296
- implement the socket hash user/reader/writer processing also
for connections that are being shut down by the connection cache.
- split out handling of current vs. last pollset socket event handling
into a function available in other code parts
- add `shutdown_poll` pollset to `connectdata` struct so that changes
in the pollset can be recorded during shutdown. (The internal handle
cannot keep it since it might be used for many connections)
Reported-by: calvin2021y on github
Fixes#14252Closes#14257
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
When libcurl discards a connection there are two phases this may go
through: "shutdown" and "closing". If a connection is aborted, the
shutdown phase is skipped and it is closed right away.
The connection filters attached to the connection implement the phases
in their `do_shutdown()` and `do_close()` callbacks. Filters carry now a
`shutdown` flags next to `connected` to keep track of the shutdown
operation.
Filters are shut down from top to bottom. If a filter is not connected,
its shutdown is skipped. Notable filters that *do* something during
shutdown are HTTP/2 and TLS. HTTP/2 sends the GOAWAY frame. TLS sends
its close notify and expects to receive a close notify from the server.
As sends and receives may EAGAIN on the network, a shutdown is often not
successful right away and needs to poll the connection's socket(s). To
facilitate this, such connections are placed on a new shutdown list
inside the connection cache.
Since managing this list requires the cooperation of a multi handle,
only the connection cache belonging to a multi handle is used. If a
connection was in another cache when being discarded, it is removed
there and added to the multi's cache. If no multi handle is available at
that time, the connection is shutdown and closed in a one-time,
best-effort attempt.
When a multi handle is destroyed, all connection still on the shutdown
list are discarded with a final shutdown attempt and close. In curl
debug builds, the environment variable `CURL_GRACEFUL_SHUTDOWN` can be
set to make this graceful with a timeout in milliseconds given by the
variable.
The shutdown list is limited to the max number of connections configured
for a multi cache. Set via CURLMOPT_MAX_TOTAL_CONNECTIONS. When the
limit is reached, the oldest connection on the shutdown list is
discarded.
- In multi_wait() and multi_waitfds(), collect all connection caches
involved (each transfer might carry its own) into a temporary list.
Let each connection cache on the list contribute sockets and
POLLIN/OUT events it's connections are waiting for.
- in multi_perform() collect the connection caches the same way and let
them peform their maintenance. This will make another non-blocking
attempt to shutdown all connections on its shutdown list.
- for event based multis (multi->socket_cb set), add the sockets and
their poll events via the callback. When `multi_socket()` is invoked
for a socket not known by an active transfer, forward this to the
multi's cache for processing. On closing a connection, remove its
socket(s) via the callback.
TLS connection filters MUST NOT send close nofity messages in their
`do_close()` implementation. The reason is that a TLS close notify
signals a success. When a connection is aborted and skips its shutdown
phase, the server needs to see a missing close notify to detect
something has gone wrong.
A graceful shutdown of FTP's data connection is performed implicitly
before regarding the upload/download as complete and continuing on the
control connection. For FTP without TLS, there is just the socket close
happening. But with TLS, the sent/received close notify signals that the
transfer is complete and healthy. Servers like `vsftpd` verify that and
reject uploads without a TLS close notify.
- added test_19_* for shutdown related tests
- test_19_01 and test_19_02 test for TCP RST packets
which happen without a graceful shutdown and should
no longer appear otherwise.
- add test_19_03 for handling shutdowns by the server
- add test_19_04 for handling shutdowns by curl
- add test_19_05 for event based shutdowny by server
- add test_30_06/07 and test_31_06/07 for shutdown checks
on FTP up- and downloads.
Closes#13976
Before this patch, two macros were used to guard IPv6 features in curl
sources: `ENABLE_IPV6` and `USE_IPV6`. This patch makes the source use
the latter for consistency with other similar switches.
`-DENABLE_IPV6` remains accepted for compatibility as a synonym for
`-DUSE_IPV6`, when passed to the compiler.
`ENABLE_IPV6` also remains the name of the CMake and `Makefile.vc`
options to control this feature.
Closes#13349
new struct ip_quadruple for holding local/remote addr+port
- used in data->info and conn and cf-socket.c
- copy back and forth complete struct
- add 'secondary' to conn
- use secondary in reporting success for ftp 2nd connection
Reported-by: DasKutti on github
Fixes#13084Closes#13090
- can be borrowed by transfer during recv-write operation
- needs to be released before borrowing again
- adjustis size to `data->set.buffer_size`
- used in transfer.c readwrite_data()
Closes#12805
Use the closure handle for disconnecting connection cache entries so
that anything that happens during the disconnect is not stored and
associated with the 'data' handle which already just finished a transfer
and it is important that details from the unrelated disconnect does not
taint meta-data in the data handle.
Like storing the response code.
This also adjust test 1506. Unfortunately it also removes a key part of
the test that verifies that a connection is closed since when this
output vanishes (because the closure handle is used), we don't know
exactly that the connection actually gets closed in this test...
Reported-by: ohyeaah on github
Fixes#12367Closes#12405
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
Linked lists themselves do not carry any allocations, so for the lists
that do not have have a set destructor we can just skip the
Curl_llist_destroy() call and save CPU time.
Closes#10764
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
To simplify, and also since the returned name is not the full actual
name used for the check. The port number and zone id is also involved,
so just showing the name is misleading.
Closes#8750
1. The function would only ever return CURLE_OK anyway
2. Only one caller actually used the return code
3. Most callers did (void)Curl_disconnect()
Closes#8303
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
As host names are case insensitive, the use of case sensitive hashing
caused unnecesary cache misses and therefore lost performance. This
lowercases the hash key.
Reported-by: Harry Sintonen
Fixes#7159Closes#7161
The Curl_easy pointer struct entry in connectdata is now gone. Just
before commit 215db086e0 landed on January 8, 2021 there were 919
references to conn->data.
Closes#6608
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
