TL;DR: Save 10 minutes of CI time for GHA/macos jobs using pre-fills and
add pre-fill verification for Apple and Windows. Also restores Xcode job
and saves 1.5-10 minutes configuring iOS jobs.
Pre-filling feature detection results can bring down the CMake configure
step to ~5 seconds on most GHA runners, ~10 seconds in slow envs like
Cygwin/MSYS2.
The potential savings per job are:
- 5-40 (average 19) seconds on GHA/macos (33 jobs)
- ~10 seconds on GHA for iOS GNU Makefile (1 job)
- 1.5-10 minutes on GHA for iOS Xcode generator (1 job)
- 10 seconds on GHA/linux with native Ubuntu (12 jobs)
- 40 seconds for Cygwin/MSYS2 (2 jobs)
- 5-10 seconds for virtualized BSDs, native CPU (3 jobs)
- ~60 seconds for virtualized BSDs, emulated CPU (1 job)
On native Windows pre-filling has been in place for a long time and
saving 8 minutes (VS2019-VS2015) to 1.5-2 minutes (VS2022), 3 minutes
(VS2022 UWP), and 30-60 seconds (MinGW), per CI job.
The downside is that detection results need to be manually collected and
filtered to those that universally apply to all platforms that they are
enabled on. Another downside is that by using a cache, we're not running
the actual detections, and thus won't catch regressions in them. It
means we must make sure that the cache is solid and matches with actual
detections results. An upside is that it gives a rough overview of which
features are available on which platforms. Another upside is pre-filled
values do work for feature detections skipped for cross-builds, e.g.
`HAVE_WRITABLE_ARGV`.
This PR adds a pre-fill cache that supports all Unixes (except OmniOS)
used in CI, and makes it usable with an internal option. It also enables
it for GHA/macos CI jobs, where the maximum savings are. And also for
the two iOS [1] and two Cygwin/MSYS2 jobs. The latters don't have
pre-fill checks and we can drop them if they turn into a hassle.
Saving:
- 10 minutes of CI time per GHA/macos workflow run. [2]
- ~80 seconds per GHA/windows workflow run with Cygwin/MSYS2.
(offsetting the cost of pre-fill verifications)
- 1.5-10 minutes per GHA/non-native runs with iOS jobs. [3]
You can enable pre-fill locally with `-D_CURL_PREFILL=ON`. It's
experimental, and if you experience a problem, file a PR or an Issue.
This PR also adds a pre-fill checker for macOS and MinGW/MSVC Windows
GHA jobs to catch if the cache diverges from real detections. It also
adds this logic to AppVeyor, but doesn't enable it due to the perf
penalty of 2 minutes mininum.
The pre-fill checker works by configuring out-of-tree with and without
pre-fill, then diffing their `lib/curl_config.h` outputs.
Exceptions are 3 detection results exposed indirectly [4], and missing
to expose 2, of which one is the C89 header `stddef.h`. While we assume
the C99 `stdint.h` available outside iOS. We can expose them in the
future, if necessary.
The pre-fill checks cost in total:
- ~20 seconds for macOS
- ~40 seconds for MinGW on GHA
- ~80 seconds for MSVC on GHA (UWP would be 2x this)
An extra time saving potential is caching type sizes. They are
well-known, and seldom change, esp. in CI. GHA/Windows jobs spend 8-17
seconds per job on these ~12 feature checks. ~5s on Cygwin/MSYS2. Couple
of seconds on other platforms. (This PR doesn't make this optimization.)
Another opportunity is doing the same for autotools, which typically
spends more time in the configuration step than cmake.
[1] Xcode job restored as a
follow-up to be5f20202c#16302
[2] GHA/macos cmake configure times in seconds:
Job | Bef. | After | Gain
:----------------------------------------------- | ----: | ----: | ----:
CM clang GnuTLS !ldap krb5 | 21.2 | 4.5 | 16.7
CM clang LibreSSL !ldap heimdal c-ares +examples | 13.3 | 3.9 | 9.4
CM clang OpenSSL +static libssh +examples | 20.0 | 4.6 | 15.4
CM clang OpenSSL IDN clang-tidy~ (w/chkprefill) | 15.7 | 18.6 | -2.9
CM clang OpenSSL gsasl rtmp AppleIDN | 25.0 | 4.7 | 20.3
CM clang OpenSSL torture !FTP | 15.3 | 4.5 | 10.8
CM clang OpenSSL torture FTP | 25.0 | 5.9 | 19.1
CM clang SecureTransport debug | 18.0 | 3.8 | 14.2
CM clang macos-13 SecureTransport | 45.8 | 12.4 | 33.4
CM clang macos-14 SecureTransport | 15.8 | 4.6 | 11.2
CM clang macos-15 SecureTransport | 26.8 | 6.1 | 20.7
CM clang mbedTLS openldap brotli zstd | 15.1 | 6.5 | 8.6
CM clang wolfSSL !ldap brotli zstd | 27.0 | 4.4 | 22.6
CM gcc-12 GnuTLS !ldap krb5 | 39.1 | 8.7 | 30.4
CM gcc-12 LibreSSL !ldap heimdal c-ares +examples| 23.8 | 7.2 | 16.6
CM gcc-12 OpenSSL +static libssh +examples | 20.7 | 8.5 | 12.2
CM gcc-12 OpenSSL gsasl rtmp AppleIDN | 23.1 | 10.1 | 13.0
CM gcc-12 SecureTransport debug | 21.1 | 4.8 | 16.3
CM gcc-12 mbedTLS openldap brotli zstd | 21.4 | 5.8 | 15.6
CM gcc-12 wolfSSL !ldap brotli zstd | 21.1 | 6.9 | 14.2
CM gcc-14 macos-13 SecureTransport | 61.9 | 18.7 | 43.2
CM gcc-14 macos-14 SecureTransport | 30.5 | 6.4 | 24.1
CM gcc-14 macos-15 SecureTransport | 32.7 | 8.4 | 24.3
CM llvm@15 GnuTLS !ldap krb5 | 21.1 | 7.5 | 13.6
CM llvm@15 LibreSSL !ldap heimdal c-ares +exampl~| 24.6 | 6.8 | 17.8
CM llvm@15 OpenSSL +static libssh +examples | 19.0 | 6.4 | 12.6
CM llvm@15 OpenSSL gsasl rtmp AppleIDN | 19.0 | 8.2 | 10.8
CM llvm@15 SecureTransport debug | 18.0 | 5.4 | 12.6
CM llvm@15 macos-13 SecureTransport | 66.2 | 25.7 | 40.5
CM llvm@15 macos-14 SecureTransport | 31.9 | 6.1 | 25.8
CM llvm@15 mbedTLS openldap brotli zstd | 19.5 | 8.9 | 10.6
CM llvm@15 wolfSSL !ldap brotli zstd | 24.3 | 5.9 | 18.4
CM llvm@18 macos-15 SecureTransport | 33.8 | 6.4 | 27.4
Total | 856.8 | 257.3 | 599.5
Before: https://github.com/curl/curl/actions/runs/13311042735/job/37173478424
After: https://github.com/curl/curl/actions/runs/13313927119/job/37183206426?pr=15841
[3] iOS:
Before: https://github.com/curl/curl/actions/runs/13326401704?pr=15841
After: https://github.com/curl/curl/actions/runs/13332177764?pr=15841
[4] detection results exposed indirectly in `curl_config.h`:
- `HAVE_FILE_OFFSET_BITS` via `_FILE_OFFSET_BITS`
- `HAVE_GETHOSTBYNAME_R_*_REENTRANT` via `NEED_REENTRANT`
- `HAVE_SOCKADDR_IN6_SIN6_ADDR` via `USE_IPV6`
Closes#15841
We set this macro to silence a warning inside `openldap.h`. With this
warning now silenced by using `-isystem`, we can drop it. Also it never
had to be set to `1`.
Also enable OpenLDAP in a CMake GHA/macos job.
Follow-up to 445fb81237#14763
Follow-up to 751e168d93#12024Closes#16146
- move checkout step right before use.
- quotes in yaml and bash.
- unfold single-line run commands.
- set `CMAKE_WARN_DEPRECATED=OFF` for CMake with Android NDK to avoid
a wall of useless deprecation warnings hiding useful output.
These warnings happen in 3rd-party scripts, and unfixable in curl.
Closes#16042
build:
- autotools: fix to build generated sources for the `tidy` target.
- autotools: allow passing custom clang-tidy options via
`CURL_CLANG_TIDYFLAGS` env.
- cmake: add `CURL_CLANG_TIDY` option to configure for `clang-tidy`.
Also add:
- `CLANG_TIDY` variable to customize the `clang-tidy` tool.
- `CURL_CLANG_TIDYFLAGS` to pass custom options to `clang-tidy`.
- apply `--enable-werror` and `-DCURL_WERROR=ON` to `clang-tidy`.
CI/GHA:
- add clang-tidy job for Linux, using autotools and clang-tidy v18.
This one needs to disable `clang-analyzer-valist.Uninitialized`
to avoid false positives:
https://github.com/llvm/llvm-project/issues/40656
Duration: 5.5 minutes
- add clang-tidy job for macOS, using cmake and clang-tidy v19.
This one also covers tests and examples, and doesn't hit the false
positives seen with llvm v18 and earlier.
Duration: 4.5 minutes
- Linux/macOS: skip installing test dependencies when not building or
running tests.
fix fallouts reported by `clang-tidy`:
- lib:
- cf-h2-proxy: unused assignment in non-debug builds.
- cf-socket: silence warning.
FIXME: https://github.com/curl/curl/pull/15825#issuecomment-2561867769
- ftp: NULL passed to `strncmp()`.
- http2: NULL-ptr deref.
- mprintf: silence warning.
- src/tool_writeout: NULL passed to `fputs()`.
- examples:
- invalid file pointers.
- missing `fclose()`.
- tests:
- http/clients/hx-download: memory leaks on error.
- http/clients/hx-download: memory leak on repeat `-r` option.
- server: double `fclose()`.
https://www.man7.org/linux/man-pages/man3/fclose.3.html
- server: invalid file pointer/handle.
- server/getpart: unused assignments.
- server/mqttd: leak on failed `realloc()`.
- server/tftpd: NULL passed to `strcmp()`.
Closes#15825
The new detection method also allows to enable librtmp without using
OpenSSL as a curl TLS backend at the same time.
Also:
- implement manual version detection for librtmp.
Version info is in hex. With CMake 3.13 and newer, extract it as a hex
number. With earlier CMake version, just strip the leading zeroes.
Doing more here seems overkill because librtmp has been standing
at 2.3/2.4 for a decade now. Bumping into hex digits seems unlikely
before deprecating CMake 3.13 support.
librtmp advertises v2.4 via its `pkg-config` module, and v2.3 via
its public header. The latter shows up in `curl -V` and either can
be shown at configure-time depending on detection method.
This isn't a curl bug.
- GHA/macos: enable rtmp in a job.
- apply the "half-detection" fix to the Find module.
`librtmp` is also affected (in CI too), because it depends on libssl and
libcrypto.
Closes#15832
Drop them, except for Secure Transport jobs where they may trigger
different code paths.
Also drop unused `matrix.build.cflags` variable.
Follow-up to ef90ee39e1#15763Closes#15766
On apple builds, the gssapi/ldap/securetransport headers deprecate
almost everything which leads to a wall of compiler warnings on use in
code.
Suppress those warning that may hide other warnings/errors.
Closes#15763
- make `curl_dependency_option()` more generic.
- extend `CURL_BROTLI` and `CURL_ZSTD` options to accept
`AUTO` in addition to existing `ON` and `OFF`.
- change `CURL_BROTLI` and `CURL_ZSTD` option default
to `AUTO`. Was: `OFF`.
It brings cmake behavior closer to `./configure`.
Still different:
- `./configure` defaults to `off` which means to check default
locations. cmake checks more locations by default.
(Also tried `NO_CMAKE_PATH`, but then it checked less locations.)
- cmake returns both `brotlicommon` and `brotlidec` libs,
while `./configure` only returns the latter.
- ci: drop explicit cmake options, that are now unnecessary.
- GHA/configure-vs-cmake: make adjustments to make tests pass.
Closes#15431
The ECH feature cannot be built without HTTPS RR.
ECH automatically implied HTTPS RR in `./configure` but not in CMake,
winbuild, documentation.
Also update documentation and CI configs.
Follow-up to a362962b72#11922Closes#15648
Homebrew switched to `pkgconf`, and now pkg-config installs an extra
package. Update package list to avoid that.
The side-effect of `pkgconf` is that this former log message:
```
-- Package 'libcrypto', required by 'libssh2', not found
```
https://github.com/curl/curl/actions/runs/11779568834/job/32808325442#step:7:84
is replaced by this, and repeated 10 times:
```
Package libcrypto was not found in the pkg-config search path.
Perhaps you should add the directory containing `libcrypto.pc'
to the PKG_CONFIG_PATH environment variable
Package 'libcrypto', required by 'libssh2', not found
```
https://github.com/curl/curl/actions/runs/11792711391/job/32846858320#step:7:85Closes#15575
Using this option (only available in debug builds) makes curl always
call curl_easy_duphandle() on the handle before using it.
To help us catch curl_easy_duphandle() mistakes better.
Add a CI job using this.
Bonus: the previous runtests option -e is now also supported as
--test-event
Closes#15504
As discovered earlier, Homebrew gcc is built against a specific Apple
SDK version and doesn't work when matched up with a different version,
e.g. the one advertised as default by the macos runner image.
Before this patch this was resolved with brute force by zapping the
hack-layer gcc component to avoid the bad interference. This worked
for us, but it's fragile, accidental and doesn't translate to
real-world build environments. Thus, impractical.
Avoid this by explicitly selecting the SDK version gcc was built for and
meant to be used with, as shown by `gcc --print-sysroot`.
It assumes that the gcc binaries preinstalled on the runner images
always ship with the SDK version they reference. It also assumes
this works with and without `brew update`.
Also:
- add 4 quick build-only jobs to test all gcc/macos combos.
- list SDKs offered via CommandLineTools.
Suggested-by: Bo Anderson
Ref: https://github.com/Homebrew/homebrew-core/issues/194778#issuecomment-2462764619
Follow-up to c349bd668c#14097Closes#15518
To match other workflows and to avoid repetition in rules.
Also:
- fix build example step for cmake. update a job to use it.
- use `cmake` to invoke the builds (instead of ninja directly).
- extend test 2100 exclusion to more jobs.
It fails with all `!debug gcc-12` jobs with autotools.
With cmake this only happened for gcc-12 Secure Transport jobs
for some reason.
Closes#15312
- Linux: move test and pytest prereqs right before test run.
- returns build phase results faster.
- allows skipping steps for jobs that don't need them.
- makes dependencies more transparent.
- sync prereq install step names.
- use `tests/requirements.txt` more.
Closes#15275
- update mbedTLS repo URL.
- switch local mbedTLS build to use CMake, and Ninja.
CMake build is required to create and install mbedTLS `pkg-config`
files. (as of v3.6.1)
`-DCMAKE_POSITION_INDEPENDENT_CODE=ON` required to avoid this error
when linking mbedtls to `libcurl.so`:
```
/usr/bin/ld: /home/runner/mbedtls/lib/libmbedcrypto.a(cipher.c.o): warning: relocation against `mbedtls_cipher_base_lookup_table' in read-only section `.text'
/usr/bin/ld: /home/runner/mbedtls/lib/libmbedtls.a(ssl_tls.c.o): relocation R_X86_64_PC32 against symbol `mbedtls_x509_crt_profile_suiteb' can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: bad value
```
Ref: https://github.com/curl/curl/actions/runs/11245069259/job/31264386723#step:40:43
- make local mbedTLS build 10x smaller by omitting programs and tests.
- GHA/linux: fix cmake warning by adding `-B .` option.
- GHA/linux: add build-only cmake job for packaged mbedTLS (2.x).
- fix compiler warning when building with mbedTLS 2.x:
```
/home/runner/work/curl/curl/lib/vtls/mbedtls.c:344:1: error: ‘mbed_cipher_suite_get_str’ defined but not used [-Werror=unused-function]
344 | mbed_cipher_suite_get_str(uint16_t id, char *buf, size_t buf_size,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
```
Ref: https://github.com/curl/curl/actions/runs/11244999065/job/31264168295#step:40:50
Also in preparation for #15193Closes#15208
- add `macos-15` Sequoia to combinations jobs.
- add `llvm@18` to combinations jobs for `macos-15`.
- fix cmake, autotools configurations for llvm 18.
It requires `CMAKE_OSX_SYSROOT` for cmake, and `--sysroot` within `CC`
for both cmake and autotools.
(Also add `--target` to `CC` for all jobs.)
- stop `brew update` on `macos-12`.
`macos-12` is Monterey. Homebrew stopped providing binaries for it
after the latest macOS was out. It means newer versions of packages
have to be built from source, which is slow and undesired. Try to
avoid it using this trick. If it doesn't work, `macos-12` jobs will
have to be dropped.
- update Xcode support matrix.
Ref: https://github.com/actions/runner-images/blob/main/images/macos/macos-15-arm64-Readme.mdCloses#15108
- CI default: raise parallelism to 20
- CI valgind: set parallelism to 6
- CI non-native: adapt parallelism for OS builds
- CI Windows: no longer ignore FTP, TFTP, MQTT and SMTP
- CI Windows: restrict test timeout to 10 minutes
- CI Windows: do not run tests for msh3 build
- tests, various: restrict curl invocation to ipv4 to avoid talking to
any ipv6 test server running in parallel
- tests: requiring http/2 server no longer needs to mention http server
- test 190: use a fixed timeout of 10 seconds instead of %FTPTIME2, as
that value rises under parallel load beyond what the server is waiting
and then produces different results
- test 1540: add debug logging
- testrunner: add verify checks for http/2 and http/3 server
Closes#15040
- Move `docs/examples` builds under a separate target.
- Make `BUILD_EXAMPLES` default to `ON`. It means to generate the rules
for `docs/examples` by default, but not build them. To build them,
an explicit `make curl-examples` (or ninja, etc) command is necessary.
This syncs behaviour with autotools, and also how both cmake and
autotools are building tests.
- GHA: update cmake jobs to use the new way of building examples.
- GHA: move examples build step at the end of the job, after building
and running tests. This allows to have build and test run results
faster, and leave the seldom-changing examples build to the end.
Building examples is the slowest build step with no practical way to
make them fast.
- appveyor: enable building examples in two old-MSVC jobs.
- examples: fix examples to build cleanly with old MSVC versions.
- GHA/non-native: move example build log under a GHA foldable section.
- GHA/windows: move building examples into separate step for Linux cross
jobs.
Follow-up to dfdd978f7c#13491Closes#14906
CI:
- GHA/windows: enable OpenSSH server, SysInternals `handle`, `impacket`.
Skip `impacket` on MSYS2 due to install failure.
Skip OpenSSH server for old/standalone mingw-w64 (building curl
without SSH there.)
- GHA/windows: make test tool installs a separate step.
- GHA/cygwin: enable OpenSSH server.
Skip `impacket`: it's compiling for 7 minutes then breaks.
Skip `stunnel` due to sluggish test run performance.
(This update is unrelated to Azure jobs.)
- GHA/linux: migrate Linux jobs from Azure CI.
- GHA/linux: migrate scanbuild job from Azure CI.
- GHA/linux: enable libssh2 in a job. Also enable valgrind.
- CI/windows: enable SSPI in two jobs.
- CI/windows: disable zlib in one more job.
- CI/windows: improve `if` condition checking GnuTLS.
- CI/windows: ignore SFTP/SCP tests as necessary.
- universally ignore SCP tests, they fail everywhere.
- ignore test 612.
- ignore test 613 616 618 with MSYS2 mingw-w64.
- ignore test 614 with libssh.
- ignore all SFTP with MSYS2 native.
- ignore all SFTP with vcpkg with `libssh2[core,zlib]`.
- ignore a couple of SFTP tests with MSYS2 mingw-w64.
(This matches settings on Azure CI.)
- GHA/windows: ignore failing 1451 'Basic SMB request' test for
old mingw-w64 7.3.0 (but not for 9.5.0!):
```
2024-09-11 21:45:59,738 ERROR smbComNegotiate: b'NT LM 0.12\x00' is not in list
[...]
curl: (7) Could not connect to server
[...]
FAIL 1451: 'Basic SMB request' SMB
```
Ref: https://github.com/curl/curl/actions/runs/10816280746/job/30007130770#step:13:3546
- CI/Azure: delete, now moved to GHA.
sshserver:
- sshserver: fix permissions for SSH host key on Windows, allowing sshd
to launch.
- sshserver: fix initializing config paths with Cygwin/MSYS2 sshd.
- sshserver: fix initializing config paths in parallel builds.
- sshserver: delete redundant `DenyUsers`. This also opens the way
to allow multiple usernames.
- sshserver: fix `AllowUsers` for GHA/windows, by allowing the
domainless username again.
Follow-up to 3ee7c676ec#5721
- sshserver: fix `Deprecated option` warnings in `sshd_config`:
```
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 7: Deprecated option AuthorizedKeysFile2
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 25: Deprecated option KeyRegenerationInterval
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 35: Deprecated option RhostsRSAAuthentication
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 36: Deprecated option RSAAuthentication
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 37: Deprecated option ServerKeyBits
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 41: Deprecated option UseLogin
```
- sshserver: fix `Deprecated option` warnings in `ssh_config` with
Cygwin/MSYS2.
- sshserver: fix dumping config files due to the filenames missing their
full paths.
- sshserver: add workaround to make `logmsg` messages visible.
Before this patch they only went to a file and never shown.
runtests:
- runtests: log details when these Windows commands are called:
`handle`, `taskkill`, `tasklist`.
- runtests: add documentation links to Windows tools:
`handle`, `taskkill`, `tasklist`, `icacls`.
- runtests: add `-t` (kill whole tree) option to `taskkill` in
`servers.pm`, syncing it with the other `taskkill` call.
Follow-up to bc72a78a11#14488
- runtests: show warning if Sysinternals `handle` tool is missing.
- runtests: drop Windows XP Home compatibility `tskill` call.
The call was made on all Windows versions. It's possibly overkill to
do this, because XP Home is probably rarely used for running curl
tests these days. In case it's needed, it'd be better to put it under
an explicit option.
- runtests: show Perl version and path.
Fix/silence fallouts:
- unit2603: fix building with disabled HTTP support.
- unit2604: silence `-Woverlength-strings` warnings in C89 mode.
- test437, test1614: fix to pass with no-IPv6 builds.
Closes#14859
- install impacket for cmake jobs.
- stop installing autotools for cmake jobs.
(also saving the extra seconds necessary for impacket install.)
- delete no longer necessary openssl pkg-config patch.
- `brew unlink openssl` unconditionally. This is safe, we no longer need
it at the default path, and the condition were never met anyway for
a while now.
- stop installing openssl, it's there on the base image.
(it was also missed for cmake, but that's okay)
before: https://github.com/curl/curl/actions/runs/10864438947/job/30149718802
after: https://github.com/curl/curl/actions/runs/10865247916/job/30151507582Closes#14911
After this patch LDAPS is disabled by default when LDAP is manually
disabled.
This makes it unnecessary to disable them in sync manually just to avoid
a `CMakeLists.txt` warning.
Syncs behavior with `./configure`.
Closes#14758
- GHA/macos: set timeout for test runs.
Double the value for autotools to fit torture tests.
- GHA/cygwin: reduce test run timeout for autotools.
- GHA/cygwin: enable building tests with cmake.
- GHA/windows: enable building tests with MSYS cmake.
- GHA/windows: enable building tests with MSVC UWP.
- appveyor: enable building tests with VS2008 x86 and VS2010 x64.
- tests: add workaround compiler warnings when building with VS2010:
```
tests\server\util.c(482): warning C4306: 'type cast' : conversion from 'int' to 'void (__cdecl *)(int)' of greater size
tests\server\util.c(486): warning C4306: 'type cast' : conversion from 'int' to 'void (__cdecl *)(int)' of greater size
tests\server\util.c(490): warning C4306: 'type cast' : conversion from 'int' to 'void (__cdecl *)(int)' of greater size
tests\server\util.c(720): warning C4306: 'type cast' : conversion from 'int' to 'void (__cdecl *)(int)' of greater size
tests\server\util.c(726): warning C4306: 'type cast' : conversion from 'int' to 'void (__cdecl *)(int)' of greater size
tests\server\util.c(732): warning C4306: 'type cast' : conversion from 'int' to 'void (__cdecl *)(int)' of greater size
tests\server\util.c(781): warning C4306: 'type cast' : conversion from 'int' to 'void (__cdecl *)(int)' of greater size
tests\server\util.c(785): warning C4306: 'type cast' : conversion from 'int' to 'void (__cdecl *)(int)' of greater size
tests\server\util.c(789): warning C4306: 'type cast' : conversion from 'int' to 'void (__cdecl *)(int)' of greater size
```
Ref: https://ci.appveyor.com/project/curlorg/curl/builds/50485633/job/4ujlwxod3cexmn2q#L1535
With this, tests are built in all GHA cygwin/windows jobs.
Timeouts avoid long runs with runaway issues, example:
https://github.com/curl/curl/actions/runs/10575522173Closes#14700
