Reduced size of dynamically_allocated_data structure.
Reduced number of stored values in enum dupstring and enum dupblob. This
affects the reduced array placed in the UserDefined structure.
Closes#13188
The two options CURLOPT_PROXYUSERNAME and CURLOPT_PROXYPASSWORD set the
actual names as-is, not URL encoded.
Modified test 503 to use percent-encoded strings in the credential
strings that should be passed on as-is.
Reported-by: Sergey Ogryzkov
Fixes#13265Closes#13270
Move all handling of HTTP's `Expect: 100-continue` feature into a client
reader. Add sending flag `KEEP_SEND_TIMED` that triggers transfer
sending on general events like a timer.
HTTP installs a `CURL_CR_PROTOCOL` reader when announcing `Expect:
100-continue`. That reader works as follows:
- on first invocation, records time, starts the `EXPIRE_100_TIMEOUT`
timer, disables `KEEP_SEND`, enables `KEEP_SEND_TIMER` and returns 0,
eos=FALSE like a paused upload.
- on subsequent invocation it checks if the timer has expired. If so, it
enables `KEEP_SEND` and switches to passing through reads to the
underlying readers.
Transfer handling's `readwrite()` will be invoked when a timer expires
(like `EXPIRE_100_TIMEOUT`) or when data from the server arrives. Seeing
`KEEP_SEND_TIMER`, it will try to upload more data, which triggers
reading from the client readers again. Which then may lead to a new
pausing or cause the upload to start.
Flags and timestamps connected to this have been moved from
`SingleRequest` into the reader's context.
Closes#13110
A transfer may do several `SingleRequest`s for its success. This happens
regularly for authentication, follows and retries on failed connections.
The "readwrite()" calls and functions connected to those carried a `bool
*done` parameter to indicate that the current `SingleRequest` is over.
This may happen before `upload_done` or `download_done` bits of
`SingleRequest` are set.
The problem with that is now `write_resp()` protocol handlers are
invoked in places where the `bool *done` cannot be passed up to the
caller. Instead of being a bool in the call chain, it needs to become a
member of `SingleRequest`, reflecting its state.
This removes the `bool *done` parameter and adds the `done` bit to
`SingleRequest` instead. It adds `Curl_req_soft_reset()` for using a
`SingleRequest` in a follow up, clearing `done` and other
flags/counters.
Closes#13096
new struct ip_quadruple for holding local/remote addr+port
- used in data->info and conn and cf-socket.c
- copy back and forth complete struct
- add 'secondary' to conn
- use secondary in reporting success for ftp 2nd connection
Reported-by: DasKutti on github
Fixes#13084Closes#13090
- seek_func/seek_client, use transfer values only
- remove copies held in `struct connectdata`, use only
ever `data->set.seek_func`
- resolves possible issues in multiuse connections
- new mime post reader eliminates need to ever overwriting this
- websockets, remove empty Curl_ws_done() function
Closes#13079
- Move all the "upload_done" handling to request.c
- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean
- removing data->state.ulbuf and data->req.upload_fromhere
- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer
- tftp, remove setting of data->req.upload_fromhere
- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway
- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition
- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending
- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf
Closes#13010
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk
The method for sending not just raw bytes, but bytes that are either
"headers" or "body". The send abstraction stack, to to bottom, now is:
* `Curl_req_send()`: has parameter to indicate amount of header bytes,
buffers all data.
* `Curl_xfer_send()`: knows on which socket index to send, returns
amount of bytes sent.
* `Curl_conn_send()`: called with socket index, returns amount of bytes
sent.
In addition there is `Curl_req_flush()` for writing out all buffered
bytes.
`Curl_req_send()` is active for requests without body,
`Curl_buffer_send()` still being used for others. This is because the
special quirks need to be addressed in future parts:
* `expect-100` handling
* `Curl_fillreadbuffer()` needs to add directly to the new
`data->req.sendbuf`
* special body handlings, like `chunked` encodings and line end
conversions will be moved into something like a Client Reader.
In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`,
replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative
values as the returned `CURLcode` already specifies error conditions. This
allows easier handling of lengths without casting.
Closes#12964
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
- add a client writer that does "push" response
headers written to the client if the headers api
is enabled
- remove special handling in sendf.c
- needs to be installed very early on connection
setup to catch CONNECT response headers
Closes#12880
Remove curl_mimepart object from UserDefined structure when
CURL_DISABLE_MIME flag is active. Reduce size of UserDefined structure.
Also remove unreachable code: when CURL_DISABLE_MIME is set, httpreq can
never have HTTPREQ_POST_MIME value and the same goes for the
CURL_DISABLE_FORM_API flag and the HTTPREQ_POST_FORM value
Closes#12948
- can be borrowed by transfer during recv-write operation
- needs to be released before borrowing again
- adjustis size to `data->set.buffer_size`
- used in transfer.c readwrite_data()
Closes#12805
This clarifies the handling of server responses by folding the code for
the complicated protocols into their protocol handlers. This concerns
mainly HTTP and its bastard sibling RTSP.
The terms "read" and "write" are often used without clear context if
they refer to the connect or the client/application side of a
transfer. This PR uses "read/write" for operations on the client side
and "send/receive" for the connection, e.g. server side. If this is
considered useful, we can revisit renaming of further methods in another
PR.
Curl's protocol handler `readwrite()` method been changed:
```diff
- CURLcode (*readwrite)(struct Curl_easy *data, struct connectdata *conn,
- const char *buf, size_t blen,
- size_t *pconsumed, bool *readmore);
+ CURLcode (*write_resp)(struct Curl_easy *data, const char *buf, size_t blen,
+ bool is_eos, bool *done);
```
The name was changed to clarify that this writes reponse data to the
client side. The parameter changes are:
* `conn` removed as it always operates on `data->conn`
* `pconsumed` removed as the method needs to handle all data on success
* `readmore` removed as no longer necessary
* `is_eos` as indicator that this is the last call for the transfer
response (end-of-stream).
* `done` TRUE on return iff the transfer response is to be treated as
finished
This change affects many files only because of updated comments in
handlers that provide no implementation. The real change is that the
HTTP protocol handlers now provide an implementation.
The HTTP protocol handlers `write_resp()` implementation will get passed
**all** raw data of a server response for the transfer. The HTTP/1.x
formatted status and headers, as well as the undecoded response
body. `Curl_http_write_resp_hds()` is used internally to parse the
response headers and pass them on. This method is public as the RTSP
protocol handler also uses it.
HTTP/1.1 "chunked" transport encoding is now part of the general
*content encoding* writer stack, just like other encodings. A new flag
`CLIENTWRITE_EOS` was added for the last client write. This allows
writers to verify that they are in a valid end state. The chunked
decoder will check if it indeed has seen the last chunk.
The general response handling in `transfer.c:466` happens in function
`readwrite_data()`. This mainly operates now like:
```
static CURLcode readwrite_data(data, ...)
{
do {
Curl_xfer_recv_resp(data, buf)
...
Curl_xfer_write_resp(data, buf)
...
} while(interested);
...
}
```
All the response data handling is implemented in
`Curl_xfer_write_resp()`. It calls the protocol handler's `write_resp()`
implementation if available, or does the default behaviour.
All raw response data needs to pass through this function. Which also
means that anyone in possession of such data may call
`Curl_xfer_write_resp()`.
Closes#12480
To help users better understand where the URL (and denied scheme) comes
from. Also removed "in libcurl" from the message, since the disabling
can be done by the application.
The error message now says "not supported" or "disabled" depending on
why it was denied:
Protocol "hej" not supported
Protocol "http" disabled
And in redirects:
Protocol "hej" not supported (in redirect)
Protocol "http" disabled (in redirect)
Reported-by: Mauricio Scheffer
Fixes#12465Closes#12469
- add `SingleRequest->download_done` as indicator that
all download bytes have been received
- remove `stop_reading` bool from readwrite functions
- move excess body handling into client download writer
Closes#12371
Windows compilers define `_WIN32` automatically. Windows SDK headers
or build env defines `WIN32`, or we have to take care of it. The
agreement seems to be that `_WIN32` is the preferred practice here.
Make the source code rely on that to detect we're building for Windows.
Public `curl.h` was using `WIN32`, `__WIN32__` and `CURL_WIN32` for
Windows detection, next to the official `_WIN32`. After this patch it
only uses `_WIN32` for this. Also, make it stop defining `CURL_WIN32`.
There is a slight chance these break compatibility with Windows
compilers that fail to define `_WIN32`. I'm not aware of any obsolete
or modern compiler affected, but in case there is one, one possible
solution is to define this macro manually.
grepping for `WIN32` remains useful to discover Windows-specific code.
Also:
- extend `checksrc` to ensure we're not using `WIN32` anymore.
- apply minor formatting here and there.
- delete unnecessary checks for `!MSDOS` when `_WIN32` is present.
Co-authored-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Closes#12376
- have common pattern of `if not match, continue`
- revert pages long if()s to return early
- move dead connection check to later since it may
be relatively expensive
- check multiuse also when NOT building with NGHTTP2
- for MULTIUSE bundles, verify that the inspected
connection indeed supports multiplexing when in use
(bundles may contain a mix of connection, afaict)
Closes#12373
Instead of a loop to scan over the potentially 30+ scheme names, this
uses a "perfect hash" table. This works fine because the set of schemes
is known and cannot change in a build. The hash algorithm and table size
is made to only make a single scheme index per table entry.
The perfect hash is generated by a separate tool (scripts/schemetable.c)
Closes#12347
Fixes:
```
./lib/url.c:178:56: warning: use of an empty initializer is a C2x extension [-Wc2x-extensions]
178 | static const struct Curl_handler * const protocols[] = {
| ^
./lib/url.c:178:56: warning: zero size arrays are an extension [-Wzero-length-array]
```
Closes#12344
Fixes:
```
./lib/url.c:456:35: error: no member named 'formp' in 'struct UrlState'
456 | Curl_mime_cleanpart(data->state.formp);
| ~~~~~~~~~~~ ^
```
Regression from 74b87a8af1#11682Closes#12343
1. Because the value is not strictly set with a setopt option.
2. Because otherwise when duping a handle when all the set.* fields are
first copied and an error happens (think out of memory mid-function),
the function would easily free the list *before* it was deep-copied,
which could lead to a double-free.
Closes#12323
To make it work properly with curl_easy_duphandle(). This, because
duphandle duplicates the entire 'UserDefined' struct by plain copy while
'hstslist' is a linked curl_list of file names. This would lead to a
double-free when the second of the two involved easy handles were
closed.
Closes#12315
- tunnel https proxy used for http: transfers does
no check if proxy-ssl configuration matches
- test cases added, test_10_12 fails on 8.4.0
Closes#12255
- perform connection cache matching against `data->set.ssl.primary`
and proxy counterpart
- fully clone connection ssl config only when connection is used
Closes#12237
- resolving is done for a connection, not for every transfer
- save create/dup/free of a cares channel for each transfer
- check values of setopt calls against a local channel if no
connection has been attached yet, when needed.
Closes#12198
- move definitions from content_encoding.h to sendf.h
- move create/cleanup/add code into sendf.c
- installed content_encoding writers will always be called
on Curl_client_write(CLIENTWRITE_BODY)
- Curl_client_cleanup() frees writers and tempbuffers from
paused transfers, irregardless of protocol
Closes#11908
- Fix netrc info message to use the generic ".netrc" filename if the
user did not specify a netrc location.
- Update --netrc doc to add that recent versions of curl on Windows
prefer .netrc over _netrc.
Before:
* Couldn't find host google.com in the (nil) file; using defaults
After:
* Couldn't find host google.com in the .netrc file; using defaults
Closes https://github.com/curl/curl/pull/11904
When the legacy CURLOPT_HTTPPOST option is used, it gets converted into
the modem mimpost struct at first use. This data is (now) kept for the
entire transfer and not only per single HTTP request. This re-enables
rewind in the beginning of the second request instead of in end of the
first, as brought by 1b39731.
The request struct is per-request data only.
Extend test 650 to verify.
Fixes#11680
Reported-by: yushicheng7788 on github
Closes#11682
It was previously unlimited by default, but that's not a sensible
default. While changing this has a remote risk of breaking an existing
use case, I figure it is more likely to actually save users from loops.
Closes#11581
HTTP/1 connections that are upgraded to HTTP/2 should not be picked up
for reuse and multiplexing by other handles until the 101 switching
process is completed.
Lots-of-debgging-by: Stefan Eissing
Reported-by: Richard W.M. Jones
Bug: https://curl.se/mail/lib-2023-07/0045.htmlCloses#11557
Make sure the user and password for the second request is taken from the
redirected-to URL.
Add test case 899 to verify.
Reported-by: James Lucas
Fixes#11410Closes#11412
- fix HTTP/2 check to not declare a connection dead when
the read attempt results in EAGAIN
- add H2-PROXY alive check as for HTTP/2 that was missing
and is needed
- add attach/detach around Curl_conn_is_alive() and remove
these in filter methods
- add checks for number of connections used in some test_10
proxy tunneling tests
Closes#11368
- Use CURL_FORMAT_CURL_OFF_T where %zd was erroneously used for some
curl_off_t variables.
- Use %zu where %zd was erroneously used for some size_t variables.
Prior to this change some of the Windows CI tests were failing because
in Windows 32-bit targets have a 32-bit size_t and a 64-bit curl_off_t.
When %zd was used for some curl_off_t variables then only the lower
32-bits was read and the upper 32-bits would be read for part or all of
the next specifier.
Fixes https://github.com/curl/curl/issues/11327
Closes https://github.com/curl/curl/pull/11321
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
- expression 'hostptr' is always true
- a part of conditional expression is always true: proxypasswd
- expression 'proxyuser' is always true
- avoid multiple Curl_now() calls in allocate_conn
Ref: #10929Closes#10959
- move host checks together
- simplify the scheme parser loop and the end of host name parser
- avoid itermediate buffer storing in multiple places
- reduce scope for several variables
- skip the Curl_dyn_tail() call for speed
- detect IPv6 earlier and skip extra checks for such hosts
- normalize directly in dynbuf instead of itermediate buffer
- split out the IPv6 parser into its own funciton
- call the IPv6 parser directly for ipv6 addresses
- remove (unused) special treatment of % in host names
- junkscan() once in the beginning instead of scattered
- make junkscan return error code
- remove unused query management from dedotdotify()
- make Curl_parse_login_details use memchr
- more use of memchr() instead of strchr() and less strlen() calls
- make junkscan check and return the URL length
An optimized build runs one of my benchmark URL parsing programs ~41%
faster using this branch. (compared against the shipped 7.88.1 library
in Debian)
Closes#10935
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
'data->multi' is kept a pointer to the multi handle as long as the easy
handle is actually part of it even when the handle is moved to the
pending/msgsent lists. It needs to know which multi handle it belongs
to, if for example curl_easy_cleanup() is called before the handle is
removed from the multi handle.
Alll 'data->multi' pointers of handles still part of the multi handle
gets cleared by curl_multi_cleanup() which "orphans" all previously
attached easy handles.
This is take 2. The first version was reverted for the 8.0.1 release.
Assisted-by: Stefan Eissing
Closes#10801
Linked lists themselves do not carry any allocations, so for the lists
that do not have have a set destructor we can just skip the
Curl_llist_destroy() call and save CPU time.
Closes#10764
- add parameter to `conn_is_alive()` cfilter method that returns
if there is input data waiting on the connection
- refrain from re-using connnection from the cache that have
input pending
- adapt http/2 and http/3 alive checks to digest pending input
to check the connection state
- remove check_cxn method from openssl as that was just doing
what the socket filter now does.
- add tests for connection reuse with special server configs
Closes#10690
As tested in test_02_07, when firing off 200 urls with --parallel, 199
wait for the first connection to be established. if that is multiuse,
urls are added up to its capacity.
The first url over capacity opens another connection. But subsequent
urls found the same situation and open a connection too. They should
have waited for the second connection to actually connect and make its
capacity known.
This change fixes that by
- setting `connkeep()` early in the HTTP setup handler. as otherwise
a new connection is marked as closeit by default and not considered
for multiuse at all
- checking the "connected" status for a candidate always and continuing
to PIPEWAIT if no alternative is found.
pytest:
- removed "skip" from test_02_07
- added test_02_07b to check that http/1.1 continues to work as before
Closes#10456
- Curl_write_plain/Curl_read_plain have been eliminated. Last code use
now uses Curl_conn_send/recv so that requests use conn->send/revc
callbacks which defaults to cfilters use.
- Curl_recv_plain/Curl_send_plain have been internalized in cf-socket.c.
- USE_RECV_BEFORE_SEND_WORKAROUND (active on Windows) has been moved
into cf-socket.c. The pre_recv buffer is held at the socket filter
context. `postponed_data` structures have been removed from
`connectdata`.
- the hanger in HTTP/2 request handling was a result of read buffering
on all sends and the multi handling is not prepared for this. The
following happens:
- multi preforms on a HTTP/2 easy handle
- h2 reads and processes data
- this leads to a send of h2 data
- which receives and buffers before the send
- h2 returns
- multi selects on the socket, but no data arrives (its in the buffer already)
the workaround now receives data in a loop as long as there is something in
the buffer. The real fix would be for multi to change, so that `data_pending`
is evaluated before deciding to wait on the socket.
io_buffer, optional, in cf-socket.c, http/2 sets state.drain if lower
filter have pending data.
This io_buffer is only available/used when the
-DUSE_RECV_BEFORE_SEND_WORKAROUND is active, e.g. on Windows
configurations. It also maintains the original checks on protocol
handler being HTTP and conn->send/recv not being replaced.
The HTTP/2 (nghttp2) cfilter now sets data->state.drain when it finds
out that the "lower" filter chain has still pending data at the end of
its IO operation. This prevents the processing from becoming stalled.
Closes#10280
- copy `struct Curl_addrinfo` on filter setup into context
- remove `struct Curl_addrinfoi *` with `struct Curl_sockaddr_ex *` in
connectdata that is set and NULLed by the socket filter
- this means we have no reference to the resolver info in connectdata or
its filters
- trigger the CF_CTRL_CONN_INFO_UPDATE event when the complete filter
chain reaches connected status
- update easy handle connection information on CF_CTRL_DATA_SETUP event.
Closes#10213
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
The only TLS auth type libcurl ever supported is SRP and that is the
default type. Since nobody ever sets any other type, there is no point
in wasting space to store the set type and code to check the type.
If TLS auth is used, SRP is now implied.
Closes#10181
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
- source_quote, source_prequote and source_postquote have not been used since
5e0d9aea3; September 2006
- make several fields conditional on proxy support
- make three quote struct fields conditional on FTP || SSH
- make 'mime_options' depend on MIME
- make trailer_* fields depend on HTTP
- change 'gssapi_delegation' from long to unsigned char
- make 'localportrange' unsigned short instead of int
- conn->trailer now depends on HTTP
Closes#10147
The cookiefile entries are set into the handle and should remain set for
the lifetime of the handle so that duplicating it also duplicates the
list. Therefore, the struct field is moved from 'state' to 'set'.
Fixes#10133Closes#10134
Deprecation and removal of codeset conversion support from the library
have released the strict need for an early binding of mime structures to
an easy handle (https://github.com/curl/curl/commit/2610142).
This constraint currently forces to create the handle before the mime
structure and the latter cannot be attached to another handle once
created (see https://curl.se/mail/lib-2022-08/0027.html).
This commit removes the handle pointers from the mime structures
allowing more flexibility on their use.
When an easy handle is duplicated, bound mime structures must however
still be duplicated too as their components hold send-time dynamic
information.
Closes#9927
- `Curl_ssl_get_config()` now returns the first config if no SSL proxy
filter is active
- socket filter starts connection only on first invocation of its
connect method
Fixes#9982Closes#9983
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
Regression: in commit 53bcf55 we moved the IDN conversion calls to
happen before the HSTS checks. But the HSTS checks are only done on the
server host name, not the proxy names. By moving the proxy name IDN
conversions, we accidentally broke the verbose output showing the proxy
name.
This change moves back the IDN conversions for the proxy names to the
place in the code path they were before 53bcf55.
Reported-by: Andy Stamp
Fixes#9937Closes#9939
This struct field MUST remain what the application set it to, so that
handle reuse and handle duplication work.
Instead, the request state bit 'no_body' is introduced for code flows
that need to change this in run-time.
Closes#9888
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
Adds a new option to control the maximum time that a cached
certificate store may be retained for.
Currently only the OpenSSL backend implements support for
caching certificate stores.
Closes#9620
No point in having two entry points for the same functions.
Also merged the *safe* function treatment into these so that they can
also be used when one or both pointers are NULL.
Closes#9837
- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing repeated words.
- Replace `a HTTP` with `an HTTP`
Closes#9802
Even though `PICKY_COMPILER=ON` is the default, warnings were not
enabled when using llvm/clang, because `CMAKE_COMPILER_IS_CLANG` was
always false (in my tests at least).
This is the single use of this variable in curl, and in a different
place we already use `CMAKE_C_COMPILER_ID MATCHES "Clang"`, which works
as expected, so change the condition to use that instead.
Also fix the warnings uncovered by the above:
- lib: add casts to silence clang warnings
- schannel: add casts to silence clang warnings in ALPN code
Assuming the code is correct, solve the warnings with a cast.
This particular build case isn't CI tested.
There is a chance the warning is relevant for some platforms, perhaps
Windows 32-bit ARM7.
Closes#9783
For both IPv4 and IPv6 addresses. Now also checks IPv6 addresses "correctly"
and not with string comparisons.
Split out the noproxy checks and functionality into noproxy.c
Added unit test 1614 to verify checking functions.
Reported-by: Mathieu Carbonneaux
Fixes#9773Fixes#5745Closes#9775
