Since the copy does not stop at a null byte, let's not call it anything
that makes you think it works like the common strndup() function.
Based on feedback from Jay Satiro, Stefan Eissing and Patrick Monnerat
Closes#12490
- bufref: use strndup
- cookie: use strndup
- formdata: use strndup
- ftp: use strndup
- gtls: use aprintf instead of malloc + strcpy * 2
- http: use strndup
- mbedtls: use strndup
- md4: use memdup
- ntlm: use memdup
- ntlm_sspi: use strndup
- pingpong: use memdup
- rtsp: use strndup instead of malloc, memcpy and null-terminate
- sectransp: use strndup
- socks_gssapi.c: use memdup
- vtls: use dynbuf instead of malloc, snprintf and memcpy
- vtls: use strdup instead of malloc + memcpy
- wolfssh: use strndup
Closes#12453
GCC 14 introduces a new -Walloc-size included in -Wextra which gives:
```
src/tool_operate.c: In function ‘add_per_transfer’:
src/tool_operate.c:213:5: warning: allocation of insufficient size ‘1’ for type ‘struct per_transfer’ with size ‘480’ [-Walloc-size]
213 | p = calloc(sizeof(struct per_transfer), 1);
| ^
src/var.c: In function ‘addvariable’:
src/var.c:361:5: warning: allocation of insufficient size ‘1’ for type ‘struct var’ with size ‘32’ [-Walloc-size]
361 | p = calloc(sizeof(struct var), 1);
| ^
```
The calloc prototype is:
```
void *calloc(size_t nmemb, size_t size);
```
So, just swap the number of members and size arguments to match the
prototype, as we're initialising 1 struct of size `sizeof(struct
...)`. GCC then sees we're not doing anything wrong.
Closes#12292
Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
- use CLIENTWRITE_BODY *only* when data is actually body data
- add CLIENTWRITE_INFO for meta data that is *not* a HEADER
- debug assertions that BODY/INFO/HEADER is not used mixed
- move `data->set.include_header` check into Curl_client_write
so protocol handlers no longer have to care
- add special in FTP for `data->set.include_header` for historic,
backward compatible reasons
- move unpausing of client writes from easy.c to sendf.c, so that
code is in one place and can forward flags correctly
Closes#11885
- During the check to differentiate between a port and IPv6 address
without brackets, write the binary IPv6 address to an in6_addr.
Prior to this change the binary IPv6 address was erroneously written to
a sockaddr_in6 'sa6' when it should have been written to its in6_addr
member 'sin6_addr'. There's no fallout because no members of 'sa6' are
accessed before it is later overwritten.
Closes https://github.com/curl/curl/pull/11747
- cache more Windows config results for faster initialization.
- delete unused config macros `HAVE_SYS_UTSNAME_H`, `HAVE_SSL_H`.
- delete dead references to `sys/utsname.h`.
Closes#11551
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
If the previous line starts with if/while/for AND ends with a closed
parenthesis and there's an equal number of open and closed parentheses
on that line, verify that this line is indented $indent more steps, if
not a cpp line.
Also adjust the fall-out from this fix.
Closes#11054
The open paren check wants to warn for spaces before open parenthesis
for if/while/for but also for any function call. In order to avoid
catching function pointer declarations, the logic allows a space if the
first character after the open parenthesis is an asterisk.
I also spotted what we did not include "switch" in the check but we should.
This check is a little lame, but we reduce this problem by not allowing
that space for if/while/for/switch.
Reported-by: Emanuele Torre
Closes#11044
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
'data->multi' is kept a pointer to the multi handle as long as the easy
handle is actually part of it even when the handle is moved to the
pending/msgsent lists. It needs to know which multi handle it belongs
to, if for example curl_easy_cleanup() is called before the handle is
removed from the multi handle.
Alll 'data->multi' pointers of handles still part of the multi handle
gets cleared by curl_multi_cleanup() which "orphans" all previously
attached easy handles.
This is take 2. The first version was reverted for the 8.0.1 release.
Assisted-by: Stefan Eissing
Closes#10801
- since 7.87.0 we lost adding the SSL filter for an active
FTP connection that uses SSL. This leads to hangers and timeouts
as reported in #10666.
Reported-by: SandakovMM on github
Fixes#10666Closes#10669
The feature is rarely used so this frees up data for the vast majority
of easy handles that don't use it.
Rename "protdata" to "ftpwc" since it is always an FTP wildcard struct
pointer. Made the state struct field an unsigned char to save space.
Closes#10639
- by using BIT() instead of bool
- imap: shrink struct
- ftp: make state 'unsigned char'
- ftp: sort ftp_conn struct entries on size
- urldata: use smaller fields for SSL version info storage
- pop3: reduce the pop3_conn struct size
- smtp: reduce the size of the smtp structs
Closes#10186
- copy `struct Curl_addrinfo` on filter setup into context
- remove `struct Curl_addrinfoi *` with `struct Curl_sockaddr_ex *` in
connectdata that is set and NULLed by the socket filter
- this means we have no reference to the resolver info in connectdata or
its filters
- trigger the CF_CTRL_CONN_INFO_UPDATE event when the complete filter
chain reaches connected status
- update easy handle connection information on CF_CTRL_DATA_SETUP event.
Closes#10213
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
When using the option CURLOPT_IGNORE_CONTENT_LENGTH (set.ignorecl in
code) to support growing files in FTP, the code should ignore the
initial size it gets from the server as this will not be the final size
of the file. This is done in ftp_state_quote() to prevent a size request
being issued in the initial sequence. However, in a later call to
ftp_state_get_resp() the code attempts to get the size of the content
again if it doesn't already have it, by parsing the response from the
RETR request. This fix prevents this parsing of the response to get the
size when the set.ignorecl option is set. This should maintain the size
value as -1, unknown, in this situation.
Closes#9772
- `Curl_ssl_get_config()` now returns the first config if no SSL proxy
filter is active
- socket filter starts connection only on first invocation of its
connect method
Fixes#9982Closes#9983
Commit 3b16575ae9 removed support for
building on Novell Netware, but a few leftover traces remained. This
removes the last bits.
Closes: #9966
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
- Adding Curl_conn_is_ip_connected() to check if network connectivity
has been reached
- having ftp wait for network connectivity before proceeding with
transfers.
Fixes test failures 1631 and 1632 with hyper.
Closes#9952
This struct field MUST remain what the application set it to, so that
handle reuse and handle duplication work.
Instead, the request state bit 'no_body' is introduced for code flows
that need to change this in run-time.
Closes#9888
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing repeated words.
- Replace `a HTTP` with `an HTTP`
Closes#9802
The 550 is overused as a return code for multiple error case, e.g.
file not found and/or insufficient permissions to access the file.
So we cannot fail hard in this case.
Adjust test 511 since we now fail later.
Add new test 3027 which check that when MDTM failed, but the file could
actually be retrieved, that in this case no filetime is provided.
Reported-by: Michael Heimpold
Fixes#9357Closes#9387
connect_init() (lib/http_proxy.c) swaps out the protocol state while
working on the proxy connection, this is then restored by
Curl_connect_done() after the connection completes.
ftp_do_more() extracted the protocol state pointer to a local variable
at the start of the function then calls Curl_proxy_connect(). If the proxy
connection completes, Curl_proxy_connect() will call Curl_connect_done()
(via Curl_proxyCONNECT()), which restores data->req.p to point to the ftp
protocol state instead of the http proxy protocol state, but the local
variable in ftp_do_more still pointed to the old value.
Ultimately this meant that the state worked on by ftp_do_more() was the
http proxy state not the ftp state initialised by ftp_connect(), but
subsequent calls to any ftp_ function would use the original state.
For my use-case, the visible consequence was that ftp->downloadsize was
never set and so downloaded data was never returned to the application.
This commit updates the ftp protocol state pointer in ftp_do_more() after
Curl_proxy_connect() returns, ensuring that the correct state pointer is
used.
Fixes#8737Closes#9043
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
Follow-up to 21248e052d
Disabling "assignment within conditional expression" for MSVC needs to
be done before the function starts, for it to take effect.
Closes#8218
If a server pipelines future responses within the STARTTLS response, the
former are preserved in the pingpong cache across TLS negotiation and
used as responses to the encrypted commands.
This fix detects pipelined STARTTLS responses and rejects them with an
error.
CVE-2021-22947
Bug: https://curl.se/docs/CVE-2021-22947.html
In imap and pop3, check if TLS is required even when capabilities
request has failed.
In ftp, ignore preauthentication (230 status of server greeting) if TLS
is required.
Bug: https://curl.se/docs/CVE-2021-22946.html
CVE-2021-22946
The reverted commit introduced a logic error in code that was
correct.
The client using libcurl would notice the error since FTP file
uploads in active transfer mode would somtimes complete with
success despite no transfer having been performed and the
"uploaded" file thus not being on the remote server afterwards.
The FTP server would notice the error because it receives a
RST on the data connection it has established with the client
before any data was transferred at all.
The logic error happens if the STOR response from the server have
arrived by the time ftp_multi_statemach() in the affected code path
is called, but the incoming data connection have not arrived yet.
In that case, the processing of the STOR response will cause
'ftpc->wait_data_conn' to be set to TRUE, contradicting the comment
in the code. Since 'complete' will also be set, later logic would
believe the transfer was done.
In most cases, the STOR response will not have arrived yet when
the affected code path is executed, or the incoming connection will
also have arrived, and thus the error would not express itself.
But if the speed difference of the device using libcurl and the
FTP server is exactly right, the error may happen as often as in
one out of hundred file transfers.
This reverts commit 49f3117a23.
Bug: https://curl.se/mail/lib-2021-07/0025.htmlCloses#7362
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
The libssh2 backend has SSH session associated with the connection but
the callback context is the easy handle, so when a connection gets
attached to a transfer, the protocol handler now allows for a custom
function to get used to set things up correctly.
Reported-by: Michael O'Farrell
Fixes#6898Closes#7078
If after a transfer is complete Curl_GetFTPResponse() returns an error,
curl would not free the ftp->pathalloc block.
Found by torture-testing test 576
Closes#6737
and rename it from 'ftp_list_only' since it is also used for SSH and
POP3. The state is updated internally for 'type=D' FTP URLs.
Added test case 1570 to verify.
Closes#6578
... and make sure the code never updates 'set.prefer_ascii' as it breaks
handle reuse which should use the setting as the user specified it.
Added test 1569 to verify: it first makes an FTP transfer with ';type=A'
and then another without type on the same handle and the second should
then use binary. Previously, curl failed this.
Closes#6578
Since the set value then risks getting used like that when the easy
handle is reused by the application.
Also: renamed the struct field from 'ftp_append' to 'remote_append'
since it is also used for SSH protocols.
Closes#6579
... as we ignore it anyway because servers don't report the correct size
and proftpd even blatantly returns a 550.
Updates a set of tests accordingly.
Reported-by: awesomenode on github
Fixes#6564Closes#6565
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
In the case of TFO, the remote host name is not resolved at the
connetion time.
For FTP that has lead to missing hostname for the secondary connection.
Therefore the name resolution is done at the time, when FTP requires it.
Fixes#6252Closes#6265Closes#6282
Added test 348 to verify. Added a 'STOR' command to the test FTP
server to enable test 348. Documented the command in FILEFORMAT.md
Reported-by: Duncan Wilcox
Fixes#6016Closes#6017
When using HTTPS proxy, SSL is used but not in the view of the FTP
protocol handler itself so separate the connection's use of SSL from the
FTP control connection's sue.
Reported-by: Mingtao Yang
Fixes#5523Closes#6006
... reuses the same dynamic buffer instead of doing repeated malloc/free
cycles.
Test case 100 (FTP dir list PASV) does 7 fewer memory allocation calls
after this change in my test setup (132 => 125), curl 7.72.0 needed 140
calls for this.
Test case 103 makes 9 less allocations now (130). Down from 149 in
7.72.0.
Closes#6004
These two files were always tightly connected and it was hard to
understand what went into which. This also allows us to make the
ftpsend() function static (moved from ftp.c).
Removed security.c
Renamed curl_sec.h to krb5.h
Closes#5987
If the received PASV response doesn't match the expected pattern, we
could end up reading uninitialized integers for IP address and port
number.
Issue pointed out by muse.dev
Closes#5972
