curl_ws_recv() now receives data to fill up the provided buffer, but can
return a partial fragment. The function now also get a pointer to a
curl_ws_frame struct with metadata that also mentions the offset and
total size of the fragment (of which you might be receiving a smaller
piece). This way, large incoming fragments will be "streamed" to the
application. When the curl_ws_frame struct field 'bytesleft' is 0, the
final fragment piece has been delivered.
curl_ws_recv() was also adjusted to work with a buffer size smaller than
the fragment size. (Possibly needless to say as the fragment size can
now be 63 bit large).
curl_ws_send() now supports sending a piece of a fragment, in a
streaming manner, in addition to sending the entire fragment in a single
call if it is small enough. To send a huge fragment, curl_ws_send() can
be used to send it in many small calls by first telling libcurl about
the total expected fragment size, and then send the payload in N number
of separate invokes and libcurl will stream those over the wire.
The struct curl_ws_meta() returns is now called 'curl_ws_frame' and it
has been extended with two new fields: *offset* and *bytesleft*. To help
describe the passed on data chunk when a fragment is delivered in many
smaller pieces.
The documentation has been updated accordingly.
Closes#9636
Next Protocol Negotiation is a TLS extension that was created and used
for agreeing to use the SPDY protocol (the precursor to HTTP/2) for
HTTPS. In the early days of HTTP/2, before the spec was finalized and
shipped, the protocol could be enabled using this extension with some
servers.
curl supports the NPN extension with some TLS backends since then, with
a command line option `--npn` and in libcurl with
`CURLOPT_SSL_ENABLE_NPN`.
HTTP/2 proper is made to use the ALPN (Application-Layer Protocol
Negotiation) extension and the NPN extension has no purposes
anymore. The HTTP/2 spec was published in May 2015.
Today, use of NPN in the wild should be extremely rare and most likely
totally extinct. Chrome removed NPN support in Chrome 51, shipped in
June 2016. Removed in Firefox 53, April 2017.
Closes#9307
Starting now, CURLOPT_FTP_RESPONSE_TIMEOUT is the alias instead of the
other way around.
Since 7.20.0, CURLOPT_SERVER_RESPONSE_TIMEOUT has existed as an alias
but since the option is for more protocols than FTP the more "correct"
version of the option is the "server" one so now we switch.
Closes#9104
... as replacements for deprecated CURLOPT_PROTOCOLS and
CURLOPT_REDIR_PROTOCOLS as these new ones do not risk running into the
32 bit limit the old ones are facing.
CURLINFO_PROTCOOL is now deprecated.
The curl tool is updated to use the new options.
Added test 1597 to verify the libcurl protocol parser.
Closes#8992
Referring to Daniel's article [1], making the init function thread-safe
was the last bit to make libcurl thread-safe as a whole. So the name of
the feature may as well be the more concise 'threadsafe', also telling
the story that libcurl is now fully thread-safe, not just its init
function. Chances are high that libcurl wants to remain so in the
future, so there is little likelihood of ever needing any other distinct
`threadsafe-<name>` feature flags.
For consistency we also shorten `CURL_VERSION_THREADSAFE_INIT` to
`CURL_VERSION_THREADSAFE`, update its description and reference libcurl's
thread safety documentation.
[1]: https://daniel.haxx.se/blog/2022/06/08/making-libcurl-init-more-thread-safe/
Reviewed-by: Daniel Stenberg
Reviewed-by: Jay Satiro
Closes#8989
Adds two new error codes: CURLE_UNRECOVERABLE_POLL and
CURLM_UNRECOVERABLE_POLL one each for the easy and the multi interfaces.
Reported-by: Harry Sintonen
Fixes#8921Closes#8961
This flag can be used to make sure that curl_global_init() is
thread-safe.
This can be useful for libraries that can't control what other
dependencies are doing with Curl.
Closes#8680
The callback set by CURLOPT_SSH_HOSTKEYFUNCTION is called to check
wether or not the connection should continue.
The host key is passed in argument with a custom handle for the
application.
It overrides CURLOPT_SSH_KNOWNHOSTS
Closes#7959
For consistency, use the same return code for URL malformats,
independently of what scheme that is used. Previously this would return
CURLE_LDAP_INVALID_URL, but starting now that error cannot be returned.
Closes#8170
The callbacks were partially documented to support this. Now the
behavior is documented and returning error from either of these
callbacks will effectively kill all currently ongoing transfers.
Added test 530 to verify
Reported-by: Marcelo Juchem
Fixes#8083Closes#8089
Previously, the return code CURLUE_MALFORMED_INPUT was used for almost
30 different URL format violations. This made it hard for users to
understand why a particular URL was not acceptable. Since the API cannot
point out a specific position within the URL for the problem, this now
instead introduces a number of additional and more fine-grained error
codes to allow the API to return more exactly in what "part" or section
of the URL a problem was detected.
Also bug-fixes curl_url_get() with CURLUPART_ZONEID, which previously
returned CURLUE_OK even if no zoneid existed.
Test cases in 1560 have been adjusted and extended. Tests 1538 and 1559
have been updated.
Updated libcurl-errors.3 and curl_url_strerror() accordingly.
Closes#8049
Until now, form field and file names where escaped using the
backslash-escaping algorithm defined for multipart mails. This commit
replaces this with the percent-escaping method for URLs.
As this may introduce incompatibilities with server-side applications, a
new libcurl option CURLOPT_MIME_OPTIONS with bitmask
CURLMIMEOPT_FORMESCAPE is introduced to revert to legacy use of
backslash-escaping. This is controlled by new cli tool option
--form-escape.
New tests and documentation are provided for this feature.
Reported by: Ryan Sleevi
Fixes#7789Closes#7805
Triggered before a request is made but after a connection is set up
Changes:
- callback: Update docs and callback for pre-request callback
- Add documentation for CURLOPT_PREREQDATA and CURLOPT_PREREQFUNCTION,
- Add redirect test and callback failure test
- Note that the function may be called multiple times on a redirection
- Disable new 2086 test due to Windows weirdness
Closes#7477
... and also change the 'Removed' column name to 'Last' since that
column is for the last version to contain the symbol.
Closes https://github.com/curl/curl/pull/7609
They were never officially allowed and slipped in only due to sloppy
parsing. Spaces (ascii 32) should be correctly encoded (to %20) before
being part of a URL.
The new flag bit CURLU_ALLOW_SPACE when a full URL is set, makes libcurl
allow spaces.
Updated test 1560 to verify.
Closes#7073
For options that pass in lists or strings that are subsequently parsed
and must be correct. This broadens the scope for the option previously
known as CURLE_TELNET_OPTION_SYNTAX but the old name is of course still
provided as a #define for existing applications.
Closes#7175
When a TLS server requests a client certificate during handshake and
none can be provided, libcurl now returns this new error code
CURLE_SSL_CLIENTCERT
Only supported by Secure Transport and OpenSSL for TLS 1.3 so far.
Closes#6721
- Disable auto credentials by default. This is a breaking change
for clients that are using it, wittingly or not.
- New libcurl ssl option value CURLSSLOPT_AUTO_CLIENT_CERT tells libcurl
to automatically locate and use a client certificate for
authentication, when requested by the server.
- New curl tool options --ssl-auto-client-cert and
--proxy-ssl-auto-client-cert map to CURLSSLOPT_AUTO_CLIENT_CERT.
This option is only supported for Schannel (the native Windows SSL
library). Prior to this change Schannel would, with no notification to
the client, attempt to locate a client certificate and send it to the
server, when requested by the server. Since the server can request any
certificate that supports client authentication in the OS certificate
store it could be a privacy violation and unexpected.
Fixes https://github.com/curl/curl/issues/2262
Reported-by: Jeroen Ooms
Assisted-by: Wes Hinsley
Assisted-by: Rich FitzJohn
Ref: https://curl.se/mail/lib-2021-02/0066.html
Reported-by: Morten Minde Neergaard
Closes https://github.com/curl/curl/pull/6673
- add CURLINFO_REFERER libcurl option
- add --write-out '%{referer}' command-line option
- extend --xattr command-line option to fill user.xdg.referrer.url extended
attribute with the referrer (if there was any)
Closes#6591
- New libcurl options CURLOPT_DOH_SSL_VERIFYHOST,
CURLOPT_DOH_SSL_VERIFYPEER and CURLOPT_DOH_SSL_VERIFYSTATUS do the
same as their respective counterparts.
- New curl tool options --doh-insecure and --doh-cert-status do the same
as their respective counterparts.
Prior to this change DOH SSL certificate verification settings for
verifyhost and verifypeer were supposed to be inherited respectively
from CURLOPT_SSL_VERIFYHOST and CURLOPT_SSL_VERIFYPEER, but due to a bug
were not. As a result DOH verification remained at the default, ie
enabled, and it was not possible to disable. This commit changes
behavior so that the DOH verification settings are independent and not
inherited.
Ref: https://github.com/curl/curl/pull/4579#issuecomment-554723676
Fixes https://github.com/curl/curl/issues/4578
Closes https://github.com/curl/curl/pull/6597
It is a security process for HTTP.
It doesn't seems to be standard, but it is used by some cloud providers.
Aws:
https://docs.aws.amazon.com/general/latest/gr/signature-version-4.html
Outscale:
https://wiki.outscale.net/display/EN/Creating+a+Canonical+Request
GCP (I didn't test that this code work with GCP though):
https://cloud.google.com/storage/docs/access-control/signing-urls-manually
most of the code is in lib/http_v4_signature.c
Information require by the algorithm:
- The URL
- Current time
- some prefix that are append to some of the signature parameters.
The data extracted from the URL are: the URI, the region,
the host and the API type
example:
https://api.eu-west-2.outscale.com/api/latest/ReadNets
~~~ ~~~~~~~~ ~~~~~~~~~~~~~~~~~~~
^ ^ ^
/ \ URI
API type region
Small description of the algorithm:
- make canonical header using content type, the host, and the date
- hash the post data
- make canonical_request using custom request, the URI,
the get data, the canonical header, the signed header
and post data hash
- hash canonical_request
- make str_to_sign using one of the prefix pass in parameter,
the date, the credential scope and the canonical_request hash
- compute hmac from date, using secret key as key.
- compute hmac from region, using above hmac as key
- compute hmac from api_type, using above hmac as key
- compute hmac from request_type, using above hmac as key
- compute hmac from str_to_sign using above hmac as key
- create Authorization header using above hmac, prefix pass in parameter,
the date, and above hash
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Closes#5703
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
const struct curl_easyoption *curl_easy_option_by_name(const char *name);
const struct curl_easyoption *curl_easy_option_by_id (CURLoption id);
const struct curl_easyoption *
curl_easy_option_next(const struct curl_easyoption *prev);
The purpose is to provide detailed enough information to allow for
example libcurl bindings to get option information at run-time about
what easy options that exist and what arguments they expect.
Assisted-by: Jeroen Ooms
Closes#5365
Failures clearly returned from a (SOCKS) proxy now causes this return
code. Previously the situation was not very clear as what would be
returned and when.
In addition: when this error code is returned, an application can use
CURLINFO_PROXY_ERROR to query libcurl for the detailed error, which then
returns a value from the new 'CURLproxycode' enum.
Closes#5770
Provide the HTTP method that was used on the latest request, which might
be relevant for users when there was one or more redirects involved.
Closes#5511
include zstd curl patch for Makefile.m32 from vszakats
and include Add CMake support for zstd from Peter Wu
Helped-by: Viktor Szakats
Helped-by: Peter Wu
Closes#5453
