Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
Currently the verbose output does not include which algorithms are used
for the signature and key exchange when using OpenSSL. Including the
algorithms used will enable better debugging when working on using new
algorithm implementations. Know what algorithms are used has become more
important with the fast growing research into new quantum-safe
algorithms.
This implementation includes a build time check for the OpenSSL version
to use a new function that will be included in OpenSSL 3.2 that was
introduced in openssl/openssl@6866824
Based-on-patch-by: Martin Schmatz <mrt@zurich.ibm.com>
Closes#12030
While the struct is still public in OpenSSL, there is a (somewhat
inconvenient) accessor. Use it to remain compatible if it becomes opaque
in the future.
Closes#12038
By using unique static function/variable names in source files
implementing these interfaces.
- OpenLDAP combined with any SSH backend.
- MultiSSL with mbedTLS, OpenSSL, wolfSSL, SecureTransport.
Closes#12027
- If SSL shutdown is not finished then make an additional call to
SSL_read to gather additional tracing.
- Fix http2 and h2-proxy filters to forward do_close() calls to the next
filter.
For example h2 and SSL shutdown before and after this change:
Before:
Curl_conn_close -> cf_hc_close -> Curl_conn_cf_discard_chain ->
ssl_cf_destroy
After:
Curl_conn_close -> cf_hc_close -> cf_h2_close -> cf_setup_close ->
ssl_cf_close
Note that currently the tracing does not show output on the connection
closure handle. Refer to discussion in #11878.
Ref: https://github.com/curl/curl/discussions/11878
Closes https://github.com/curl/curl/pull/11858
- we delay loading the x509 store to shorten the handshake time.
However an application callback installed via CURLOPT_SSL_CTX_FUNCTION
may need to have the store loaded and try to manipulate it.
- load the x509 store before invoking the app callback
Fixes#11800
Reported-by: guoxinvmware on github
Cloes #11805
We've seen errors left in the OpenSSL error queue (specifically,
"shutdown while in init") by adding some logging it revealed that the
source was this file.
Since we call SSL_read and SSL_shutdown here, but don't check the return
code for an error, we should clear the OpenSSL error queue in case one
was raised.
This didn't affect curl because we call ERR_clear_error before every
write operation (a0dd9df9ab), but when
libcurl is used in a process with other OpenSSL users, they may detect
an OpenSSL error pushed by libcurl's SSL_shutdown as if it was their
own.
Co-authored-by: Satana de Sant'Ana <satana@skylittlesystem.org>
Closes#11736
OpenSSL 1.1.1 defines this macro, but no ealier version, or any of the
popular forks (yet). Use the macro itself to detect its presence,
replacing the hard-wired fork-specific conditions.
This way the feature will enable automatically when forks implement it,
while also shorter and possibly requiring less future maintenance.
Follow-up to 94241a9e78#6721
Reviewed-by: Jay Satiro
Closes#11617
Make sure that context initialization during hash setup works to avoid
going forward with the risk of a null pointer dereference.
Reported-by: Philippe Antoine on HackerOne
Assisted-by: Jay Satiro
Assisted-by: Daniel Stenberg
Closes#11614
LibreSSL 2.7.0 (2018-03-21) introduced automatic initialization,
`OPENSSL_init_ssl()` function and deprecated the old, manual init
method, as seen in OpenSSL 1.1.0. Switch to the modern method when
available.
Ref: https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-2.7.0-relnotes.txt
Reviewed-by: Daniel Stenberg
Closes#11611
EGD is Entropy Gathering Daemon, a socket-based entropy source supported
by pre-OpenSSL v1.1 versions and now deprecated. curl also deprecated it
a while ago.
Its detection in CMake was broken all along because OpenSSL libs were
not linked at the point of feature check.
Delete detection from both cmake and autotools, along with the related
source snippet, and the `--with-egd-socket=` `./configure` option.
Closes#11556
- Update the OpenSSL connect state machine to handle
SSL_ERROR_WANT_RETRY_VERIFY.
This allows libcurl users that are using custom certificate validation
to suspend processing while waiting for external I/O during certificate
validation.
Closes https://github.com/curl/curl/pull/11499
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
* Configure changes to detect AWS-LC
* CMakeLists.txt changes to detect AWS-LC
* Compile-time branches needed to support AWS-LC
* Correctly set OSSL_VERSION and report AWS-LC release number
* GitHub Actions script to build with autoconf and cmake against AWS-LC
AWS-LC is a BoringSSL/OpenSSL derivative
For more information see https://github.com/awslabs/aws-lc/Closes#10320
- add parameter to `conn_is_alive()` cfilter method that returns
if there is input data waiting on the connection
- refrain from re-using connnection from the cache that have
input pending
- adapt http/2 and http/3 alive checks to digest pending input
to check the connection state
- remove check_cxn method from openssl as that was just doing
what the socket filter now does.
- add tests for connection reuse with special server configs
Closes#10690
Turns out "/usr/include/et/com_err.h" typedefs this type (without proper
variable scoping).
comerr is the "common error description library" that apparently might be used
by krb5 code, which then makes this header get used in a curl build.
Reported-by: Bruno Henrique Batista Cruz da Silva
Fixed#10502Closes#10500
- adding pytest test_10 cases for proxy httpd setup tests
- fixing openssl bug in https: proxy hostname verification that
used the hostname of the request and not the proxy name.
Closes#10498
Follow-up to e8b00fcd6a
Due to the new 'if(!nonblocking)' check on the block a level above,
there is no need to check for it again within the same conditional.
Detected by Coverity
Closes#10473
move Curl_ssl_setup_x509_store() call after the first send (ClientHello)
this gives time to parse CA anchors while waiting on the server reply
Ref: #10389Closes#10432
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- Skip content type SSL3_RT_HEADER in verbose TLS output.
This commit prevents bogus and misleading verbose TLS header messages as
discussed in #10299.
Assisted-by: Peter Wu
Closes https://github.com/curl/curl/pull/10299
This avoids UAF issues when `curl_global_cleanup()` is called before all
transfers have been completely handled. Unfortunately this seems to be a
more common pattern than we like.
Closes#10285
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
Using common method for SSL_CTX initialization of verfiy peer and CA
settings. This also provides X509_STORE sharing to become available for
ngtcp2+openssl HTTP/3.
Reported-by: violetlige on github
Fixes#10222Closes#10239
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
The only TLS auth type libcurl ever supported is SRP and that is the
default type. Since nobody ever sets any other type, there is no point
in wasting space to store the set type and code to check the type.
If TLS auth is used, SRP is now implied.
Closes#10181
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
- keeping the "current" easy handle registered at SSL* is no longer
necessary, since the "calling" data object is already stored in the
cfilter's context (and used by other SSL backends from there).
- The "detach" of an easy handle that goes out of scope is then avoided.
- using SSL_set0_wbio for clear reference counting where available.
Closes#10151
BIO_read and BIO_write return negative numbers on error, including
retryable ones. A regression from 55807e6. Both branches should be
returning -1.
The APIs are patterned after POSIX read and write which, similarly,
return -1 on errors, not zero, with EAGAIN treated as an error.
Bug: https://github.com/curl/curl/issues/10013#issuecomment-1335308146
Reported-by: David Benjamin
Closes#10021
In non-IPv6 builds the conn parameter is unused, and compilers which
run with "-Werror=unused-parameter" (or similar) warnings turned on
fails to build. Below is an excerpt from a CI job:
vtls/openssl.c: In function ‘Curl_ossl_verifyhost’:
vtls/openssl.c:2016:75: error: unused parameter ‘conn’ [-Werror=unused-parameter]
2016 | CURLcode Curl_ossl_verifyhost(struct Curl_easy *data, struct connectdata *conn,
| ~~~~~~~~~~~~~~~~~~~~^~~~
Closes: #9970
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
Adds a new option to control the maximum time that a cached
certificate store may be retained for.
Currently only the OpenSSL backend implements support for
caching certificate stores.
Closes#9620
No point in having two entry points for the same functions.
Also merged the *safe* function treatment into these so that they can
also be used when one or both pointers are NULL.
Closes#9837
This function is currently located in the lib/http.c module and is
therefore disabled by the CURL_DISABLE_HTTP conditional token.
As it may be called by TLS backends, disabling HTTP results in an
undefined reference error at link time.
Move this function to vauth/vauth.c to always provide it and rename it
as Curl_auth_allowed_to_host() to respect the vauth module naming
convention.
Closes#9600
Curl_ossl_certchain() is now an exported function in lib/vtls/openssl.c that
can also be used from quiche.c and ngtcp2.c to get the cert chain for QUIC
connections as well.
The *certchain function was moved to the top of the file for this reason.
Reported-by: Eloy Degen
Fixes#9584Closes#9597
Instances of ISSPACE() use that should rather use ISBLANK(). I think
somewhat carelessly used because it sounds as if it checks for space or
whitespace, but also includes %0a to %0d.
For parsing purposes, we should only accept what we must and not be
overly liberal. It leads to surprises and surprises lead to bad things.
Closes#9432
Next Protocol Negotiation is a TLS extension that was created and used
for agreeing to use the SPDY protocol (the precursor to HTTP/2) for
HTTPS. In the early days of HTTP/2, before the spec was finalized and
shipped, the protocol could be enabled using this extension with some
servers.
curl supports the NPN extension with some TLS backends since then, with
a command line option `--npn` and in libcurl with
`CURLOPT_SSL_ENABLE_NPN`.
HTTP/2 proper is made to use the ALPN (Application-Layer Protocol
Negotiation) extension and the NPN extension has no purposes
anymore. The HTTP/2 spec was published in May 2015.
Today, use of NPN in the wild should be extremely rare and most likely
totally extinct. Chrome removed NPN support in Chrome 51, shipped in
June 2016. Removed in Firefox 53, April 2017.
Closes#9307
from: "curl: (58) unable to set client certificate"
to: curl: (58) unable to set client certificate [error:0A00018F:SSL
routines::ee key too small]
Closes#9228
AmiSSL v5 is the latest version, featuring a port of OpenSSL 3.0.
Support for previous OpenSSL 1.1.x versions has been dropped, so
makes sense to enforce v5 as the minimum requirement. This also
allows all the AmiSSL stub workarounds to be removed as they are
now provided in a link library in the AmiSSL SDK.
Closes#9267
BoringSSL doesn't keep a version number, and doesn't self-identify itself
via any other revision number via its own headers. We can identify
BoringSSL revisions by their commit hash. This hash is typically known by
the builder. This patch adds a way to pass this hash to libcurl, so that
it can display in the curl version string:
For example:
`CFLAGS=-DCURL_BORINGSSL_VERSION="c239ffd0"`
```
curl 7.84.0 (x86_64-w64-mingw32) libcurl/7.84.0 BoringSSL/c239ffd0 (Schannel) zlib/1.2.12 [...]
Release-Date: 2022-06-27
Protocols: dict file ftp ftps gopher gophers http https imap imaps ldap ldaps mqtt pop3 [...]
Features: alt-svc AsynchDNS brotli gsasl HSTS HTTP2 HTTP3 HTTPS-proxy IDN IPv6 Kerberos [...]
```
The setting is optional, and if not passed, BoringSSL will appear without
a version number, like before this patch.
Closes#9113
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
These two options were only ever used for the OpenSSL backend for
versions before 1.1.0. They were never used for other backends and they
are not used with recent OpenSSL versions. They were never used much by
applications.
The defines RANDOM_FILE and EGD_SOCKET can still be set at build-time
for ancient EOL OpenSSL versions.
Closes#8670
Also rephrase to make it sound less dangerous:
"ALPN: server did not agree on a protocol. Uses default."
Reported-by: Nick Coghlan
Fixes#8643Closes#8651
The CURLOPT_SSL_EC_CURVES option (used by the '--curves' flag) in
libcurl was ignored when compiling with BoringSSL because
HAVE_SSL_CTX_SET_EC_CURVES was explicitly disabled if BoringSSL was
detected. However, this feature is supported in BoringSSL since
5fd1807d. This commit enables it, and also reduces the required minimal
OpenSSL version to 1.0.2 as per OpenSSL's official documentation.
Fixes#8553Closes#8556
Ideally, Curl_ssl_getsessionid should not be called unless sessionid
caching is enabled. There is a debug assertion in the function to help
ensure that. Therefore, the pattern in all vtls is basically:
if(primary.sessionid) {lock(); Curl_ssl_getsessionid(...); unlock();}
There was one instance in openssl.c where sessionid was not checked
beforehand and this change fixes that.
Prior to this change an assertion would occur in openssl debug builds
during connection stage if session caching was disabled.
Reported-by: Jim Beveridge
Fixes https://github.com/curl/curl/issues/8472
Closes https://github.com/curl/curl/pull/8484
The TLS backends convert the host name to SNI name and need to use that.
This involves cutting off any trailing dot and lowercasing.
Co-authored-by: Jay Satiro
Closes#8320
Reverts 5de8d84098 (May 2014, shipped in 7.37.0) and the
follow-up changes done afterward.
Keep the dot in names for everything except the SNI to make curl behave
more similar to current browsers. This means 'name' and 'name.' send the
same SNI for different 'Host:' headers.
Updated test 1322 accordingly
Fixes#8290
Reported-by: Charles Cazabon
Closes#8320
The tools.ietf.org domain has been deprecated a while now, with the
links being redirected to datatracker.ietf.org.
Rather than make people eat that redirect time, this change switches the
URL to a more canonical source.
Closes#8317
Previously curl would just silently ignore it if the necessary defines
are not present at build-time.
Reported-by: Stefan Eissing
Fixes#8309Closes#8310
... and double-check in the OpenSSL shutdown that the socket is actually
still there before it is used.
Fixes#8193Closes#8195
Reported-by: Leszek Kubik
Make ngtcp2+quictls correctly acknowledge `CURLOPT_SSL_VERIFYPEER` and
`CURLOPT_SSL_VERIFYHOST`.
The name check now uses a function from lib/vtls/openssl.c which will
need attention for when TLS is not done by OpenSSL or is disabled while
QUIC is enabled.
Possibly the servercert() function in openssl.c should be adjusted to be
able to use for both regular TLS and QUIC.
Ref: #8173Closes#8178
Prior to this change OpenSSL_version was only detected in configure
builds. For other builds the old version parsing code was used which
would result in incorrect versioning for OpenSSL 3:
Before:
curl 7.80.0 (i386-pc-win32) libcurl/7.80.0 OpenSSL/3.0.0a zlib/1.2.11
WinIDN libssh2/1.9.0
After:
curl 7.80.0 (i386-pc-win32) libcurl/7.80.0 OpenSSL/3.0.1 zlib/1.2.11
WinIDN libssh2/1.9.0
Reported-by: lllaffer@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/8154
Closes https://github.com/curl/curl/pull/8155
It was previously done mostly to show a match/non-match in the verbose
output even when verification was not asked for. This change skips the
loading of the CA certs unless verifypeer is set to save memory and CPU.
Closes#7892
One reason we know it can fail is if a provider is used that doesn't do
a proper job or is wrongly configured.
Reported-by: Michael Baentsch
Fixes#7840Closes#7856
On connection shutdown, a new TLS session ticket may arrive after the
SSL session cache has already been destructed. In this case, the new
SSL session cannot be added to the SSL session cache.
The callers of Curl_ssl_addsessionid() need to know whether the SSL
session has been added to the cache. If it has not been added, the
reference counter of the SSL session must not be incremented, or memory
used by the SSL session must be freed. This is now possible with the new
output parameter "added" of Curl_ssl_addsessionid().
Fixes#7683Closes#7752
This adds support for the previously unhandled supplemental data which
in -v output was printed like:
TLSv1.2 (IN), TLS header, Unknown (23):
These will now be printed with proper annotation:
TLSv1.2 (OUT), TLS header, Supplemental data (23):
Closes#7652
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Remove the previous handling that would call SSL_CTX_free(), and instead
add an assert that halts a debug build if there ever is a context
already set at this point.
Closes#7585
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
Avoid the race condition risk by instead storing the "seeded" flag in
the multi handle. Modern OpenSSL versions handle the seeding itself so
doing the seeding once per multi-handle instead of once per process is
less of an issue.
Reported-by: Gerrit Renker
Fixes#7296Closes#7306
When a connection is disassociated from a transfer, the Session ID entry
should remain.
Regression since 7f4a9a9 (shipped in libcurl 7.77.0)
Reported-by: Gergely Nagy
Reported-by: Paul Groke
Fixes#7222Closes#7230
This avoids a TCP reset (RST) if the server initiates a connection
shutdown by sending an SSL close notify alert and then closes the TCP
connection.
For SSL connections, usually the server announces that it will close the
connection with an SSL close notify alert. curl should read this alert.
If curl does not read this alert and just closes the connection, some
operating systems close the TCP connection with an RST flag.
See RFC 1122, section 4.2.2.13
If curl reads the close notify alert, the TCP connection is closed
normally with a FIN flag.
The new code is similar to existing code in the "SSL shutdown" function:
try to read an alert (non-blocking), and ignore any read errors.
Closes#7095
When a TLS server requests a client certificate during handshake and
none can be provided, libcurl now returns this new error code
CURLE_SSL_CLIENTCERT
Only supported by Secure Transport and OpenSSL for TLS 1.3 so far.
Closes#6721
This abstracts across the two HTTP/2 backends: nghttp2 and Hyper.
Add our own define for the "h2" ALPN protocol, so TLS backends can use
it without depending on a specific HTTP backend.
Closes#6959
... previously they were supported if a TLS library would (unexpectedly)
still support them, but from this change they will be refused already in
curl_easy_setopt(). SSLv2 and SSLv3 have been known to be insecure for
many years now.
Closes#6773
Otherwise, the transfer will be NULL in the trace function when the
early handshake details arrive and then curl won't show them.
Regresssion in 7.75.0
Reported-by: David Hu
Fixes#6783Closes#6792
openssl: use SSL_get_version to get connection protocol
Replace our bespoke get_ssl_version_txt in favor of SSL_get_version.
We can get rid of few lines of code, since SSL_get_version achieve
the exact same thing
Closes#6665
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Signed-off-by: Jean-Philippe Menil <jpmenil@gmail.com>
We still make the trace callback function get the connectdata struct
passed to it, since the callback is anchored on the connection.
Repeatedly updating the callback pointer to set 'data' with
SSL_CTX_set_msg_callback_arg() doesn't seem to work, probably because
there might already be messages in the queue with the old pointer.
This code therefore makes sure to set the "logger" handle before using
OpenSSL calls so that the right easy handle gets used for tracing.
Closes#6522
Rename it to 'httpwant' and make a cloned field in the state struct as
well for run-time updates.
Also: refuse non-supported HTTP versions. Verified with test 129.
Closes#6585
... because it turns out several servers out there don't actually behave
correctly otherwise in spite of the fact that the SNI field is
specifically said to be case insensitive in RFC 6066 section 3.
Reported-by: David Earl
Fixes#6540Closes#6543
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
EVP_MD_CTX_create will allocate memory for the context and returns
NULL in case the allocation fails. Make sure to catch any allocation
failures and exit early if so.
In passing, also move to EVP_DigestInit rather than EVP_DigestInit_ex
as the latter is intended for ENGINE selection which we don't do.
Closes#6224
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Emil Engler <me@emilengler.com>
