For TLSv1.3, if supported, observer special return code to retrieve
newly arrived session from mbedTLS.
Adjust test expectations now that TLSv1.3 session resumption works in
mbedTLS >= 3.6.0.
Based on #14135 by @ad-chaos
Closes#15245
Register a callback to get notified of new SSL sessions by wolfSSL.
Remove the explicit session retrieval after handshake, since this does
not work for TLSv1.3.
Adjust test expectations now that TLSv1.3 session resumption works
in wolfSSL.
Closes#15243
Add session reuse for QUIC transfers using GnuTLS. This does not include
support for TLS early data, yet.
Fix check of early data support in common GnuTLS init code to not access
the filter context, as the struct varies between TCP and QUIC
connections.
Closes#15265
This indicates that the file was created by curl which can help a user
determine the origin of a file. Like the other attributes, this is only
enabled with the --xattr option.
Closes#15237
Based on #14135, implement TLSv1.3 earlydata support for the curl
command line, libcurl and its implementation in GnuTLS.
If a known TLS session announces early data support, and the feature is
enabled *and* it is not a "connect-only" transfer, delay the TLS
handshake until the first request is being sent.
- Add --tls-earldata as new boolean command line option for curl.
- Add CURLSSLOPT_EARLYDATA to libcurl to enable use of the feature.
- Add CURLINFO_EARLYDATA_SENT_T to libcurl, reporting the amount of
bytes sent and accepted/rejected by the server.
Implementation details:
- store the ALPN protocol selected at the SSL session.
- When reusing the session and enabling earlydata, use exactly
that ALPN protocol for negoptiation with the server. When the
sessions ALPN does not match the connections ALPN, earlydata
will not be enabled.
- Check that the server selected the correct ALPN protocol for
an earlydata connect. If the server does not confirm or reports
something different, the connect fails.
- HTTP/2: delay sending the initial SETTINGS frames during connect,
if not connect-only.
Verification:
- add test_02_32 to verify earlydata GET with nghttpx.
- add test_07_70 to verify earlydata PUT with nghttpx.
- add support in 'hx-download', 'hx-upload' clients for the feature
Assisted-by: ad-chaos on github
Closes#15211
- on load, only replace existing HSTS entries if there is a full host
match
- on matching, prefer a full host match and secondary the longest tail
subdomain match
Closes#15210
Since we see Windows fails of 1915, add tracing and a connect timeout.
The test uses a port no one is supposed to listen on, but Windows has
this weird wait logic. So, set a short timeout.
Closes#15107
As the parsing and address "regeneration" are done anyway, we might as
well use the updated version in the result and thereby A) get a
normalized (and lower cased) version of the address and B) avoid a
strcpy().
Updated test 1560 to verify.
Closes#15143
Due to timings on paused response receive, the error code may vary due
to the location where it is detected that the server closed the transfer
prematurely.
Be more lenient in always allowing PARTIAL_FILE as ok.
Closes#15138
`Curl_bufq_unwrite()` used the head instead of the tail chunk to shrink
the bufq's content. Fix this and add test case that checks correct
behaviour.
Amended test 2601 accordingly.
Reported-by: Chris Stubbs
Closes#15136
Generate the certificate serial numbers automatically instead of doing
from shell (or Perl earlier).
Fixes intermittent CI failures due to the shell-based random generator
generating the same serial number twice:
```
$ openssl ca -config EdelCurlRoot-ca.cnf -revoke Server-localhost0h-sv.crt
Using configuration from EdelCurlRoot-ca.cnf
ERROR:Already revoked, serial number 66FDB23A
make: *** [../../../tests/certs/Server-localhost0h-sv.pem] Error 1
```
https://github.com/curl/curl/actions/runs/11151401083/job/30994755798?pr=15128#step:10:498
Follow-up to fa461b4eff#14486
Follow-up to fa69b41c77#13307Closes#15129
Instead of calling the shell and external tools, rely on Perl functions
like `Cwd::getcwd()`, `Cwd::abs_path()`, `Cygwin::posix_to_win_path()`,
`Cygwin::win_to_posix_path()` to retrieve the current directory and
convert between POSIX and Windows formats.
This adds native Windows Perl support, avoids most failure modes and
makes format guessing and other internal functions unnecessary.
Also:
- delete unused `sys_native_path()`.
- delete redundant `normalize_path()` because Perl `abs_path()` already
does it.
Cherry-picked from #14949Closes#15111
For all tests using -O that were previously relying on a debug build and
the CURL_TESTDIR environment variable, use the plain --output-dir option
instead so that they can run proper in non-debug builds.
Closes#15114
By keeping the headers in memory until we know the target file name,
then output them all.
Previously this option combination would cause an error.
Add test 1310 and 1492 to verify. Adjusted test 1460 to work in the new
conditions.
Closes#15110
poll() on macOS 10.12 was deemed broken in 2016 when we discovered that
it misbehaves when provided with no sockets to wait for. The
HAVE_POLL_FINE is used to mark a poll() implementation that behaves
correctly: it *should* still wait the timeout time.
curl has therefore opted to use select() on Apple operating systems ever
since. To avoid the risk that this or other breakage cause problems.
However, using select() internally is also bad because it suffers from
problems when using file descriptors beyond 1024.
This change makes poll() used if it is present, but if there is no
sockets to wait for it avoids using poll() and instead falls back to
select() - but without any sockets to wait for there is no 1024 problem.
This removes all previous special-handling involving HAVE_POLL_FINE.
ref: https://daniel.haxx.se/blog/2016/10/11/poll-on-mac-10-12-is-broken/Closes#15096
When uploading FTP with unknown length, we write a last 0-length chunk
with the EOS flag set. OpenSSL's SSL_write() errors on such a write.
Skip writing 0-length data to TLS backends instead.
Add test in FTPS for such uploads to verify.
Fixes#15101
Reported-by: Denis Goleshchikhin
Closes#15102
- add variable for the null device filename and use that in Perl code.
- initialize this variable with `NUL` on native Windows.
- add `%DEV_NULL` variable and use it in tests.
Fixes `The system cannot find the path specified.` messages seen when
running `runtests.pl` with native Windows Perl.
Also adjust code to not break mcedit syntax highlighting.
Cherry-picked from #14949Closes#15098
To ensure Perl invocations within tests call the same Perl binary used
for running the tests, as specified or auto-detected via `PERL` env
(autotools) or `PERL_EXECUTABLE` setting (cmake). Instead of the first
`perl` executable found in `PATH`.)
Cherry-picked from #14949Closes#15097
Before this patch not all tests used `%FILE_PWD` with the `file://`
protocol.
Keep `%PWD` for test1145, to keep it fail on Windows like the test
expects.
Cherry-picked from #14949Closes#15090
- CI default: raise parallelism to 20
- CI valgind: set parallelism to 6
- CI non-native: adapt parallelism for OS builds
- CI Windows: no longer ignore FTP, TFTP, MQTT and SMTP
- CI Windows: restrict test timeout to 10 minutes
- CI Windows: do not run tests for msh3 build
- tests, various: restrict curl invocation to ipv4 to avoid talking to
any ipv6 test server running in parallel
- tests: requiring http/2 server no longer needs to mention http server
- test 190: use a fixed timeout of 10 seconds instead of %FTPTIME2, as
that value rises under parallel load beyond what the server is waiting
and then produces different results
- test 1540: add debug logging
- testrunner: add verify checks for http/2 and http/3 server
Closes#15040
Our test servers run either on ipv4 *or* on ipv6, as requested.
A test case using 'localhost' or '*.local' in the url needs to
run with the specific version of the server started.
Otherwise, curl's "happy eyeball"ing will connect to another
server that may be running due to parallel testing or for some
other reasons.
Note that port reuse here depends on the OS strategy and it
seems netbsd is especially likely to hit this.
Closes#15060
Check responsiveness of http/3 server when running.
Also, a test case with http/2 or http/3 server requirement
now implicitly drags in a 'http' server and we need no longer
mention that in testdata.
Closes#15058
The variable FTPTIME2 may, on a loaded test server, become so
large that the timeout does not happen before the fixed 60 seconds
the server waits.
Closes#15056
