Add const qualifier to 5th argument of Curl_os400_sendto()
Make OS400 wrapper for sendto match the normal prototype of sendto()
with a const qualifier.
Fixes#10539Closes#10548
For SOCKS modes where a local host resolve is done.
It was previously disabled in 12d655d456, but a few local tests seem to
indicate that it works fine. Works now because of the SOCKS refactor of
4a4b63daaa that made it non-blocking.
Reported-by: roughtex on github
Fixes#10537Closes#10540
- connect timeout was used at half the configured value, if the
destination had 1 ip version 4 and other version 6 addresses
(or the other way around)
- extended test2600 to reproduce these cases
Reported-by: Michael Kaufmann
Fixes#10514Closes#10517
* do not process pending input data when copying pausedata to the
caller
* return CURLE_AGAIN if the output buffer could not be completely
written out.
Ref: #10525Closes#10529
Add an intermediate cast to `void *`, as done everywhere else when
casting from `sockaddr *` to `sockaddr_in *`.
Closes https://github.com/curl/curl/pull/10528
Turns out "/usr/include/et/com_err.h" typedefs this type (without proper
variable scoping).
comerr is the "common error description library" that apparently might be used
by krb5 code, which then makes this header get used in a curl build.
Reported-by: Bruno Henrique Batista Cruz da Silva
Fixed#10502Closes#10500
- adding pytest test_10 cases for proxy httpd setup tests
- fixing openssl bug in https: proxy hostname verification that
used the hostname of the request and not the proxy name.
Closes#10498
The protocol needs to know the size ahead of time, this is now a known
restriction and not a bug.
Also output a clearer error if the URL path does not contain proper
share.
Ref: #7896Closes#10484
This addresses undefined behaviour found using clang's UBsan:
curl/lib/setopt.c:177:14: runtime error: applying non-zero offset 1 to null pointer
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior curl/lib/setopt.c:177:14 in
Closes#10472
Changes numeric error codes into verbose error codes in two places.
Adds a prefix indicating that the error came from rustls, and in some
places which function it came from.
Adds special handling for RUSTLS_RESULT_UNEXPECTED_EOF, since the
default message of "Unexpected EOF" is insufficiently explanatory.
Closes#10463
Follow-up to e8b00fcd6a
Due to the new 'if(!nonblocking)' check on the block a level above,
there is no need to check for it again within the same conditional.
Detected by Coverity
Closes#10473
vquic stabilization
- udp send code shared between ngtcp2 and quiche
- quiche handling of data and events improved
ngtcp2 and pytest improvements
- fixes handling of "drain" situations, discovered in scorecard
tests with the Caddy server.
- improvements in handling transfers that have already data or
are already closed to make an early return on recv
pytest
- adding caddy tests when available
scorecard improvemnts.
- using correct caddy port
- allowing tests for only httpd or caddy
Closes#10451
- as reported in #10433, HTTP/2 uploads may stall when a response is
received before the upload is done. This happens when the
data->state.drain is set for such a transfer, as the special handling
in transfer.c from then on only cared about downloads.
- add continuation of uploads, if applicable, in this case.
- add pytest case test_07_12_upload_seq_large to reproduce this scenario
(although, current nghttp2 implementation is using drain less often)
Reported-by: Lucas Pardue
Fixes#10433Closes#10443
If curl is built with openldap support (USE_OPENLDAP=1) but does not
have also some other protocol (IMAP/SMTP/POP3) enabled that brings
in Curl_sasl_* functions, then the build will fail with undefined
references to various symbols:
ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_decode_mech'
ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_parse_url_auth_option'
ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_cleanup'
ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_can_authenticate'
ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_continue'
ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_start'
ld: ../lib/.libs/libcurl.so: undefined reference to `Curl_sasl_init'
This was tracked down to these functions bein used in openldap.c but
defined in curl_sasl.c and then forward in two vauth/ files to have
a guard against a set of #define configurations that was now extended
to cover also this case.
Example configuration targeted that could reproduce the problem:
curl 7.87.1-DEV () libcurl/7.87.1-DEV .... OpenLDAP/2.6.3
Protocols: file ftp ftps http https ldap ldaps
Closes#10445
Prior to this change a workaround for Windows to recv before every send
was enabled by default. The way it works is a recv is called before
every send and saves the received data, in case send fails because in
Windows apparently that can wipe out the socket's internal received
data buffer.
This feature has led to several bugs because the way libcurl operates
it waits on a socket to read or to write, and may not at all times
check for buffered receive data.
Two recent significant bugs this workaround caused:
- Broken Schannel TLS 1.3 connections (#9431)
- HTTP/2 arbitrary hangs (#10253)
The actual code remains though it is disabled by default. Though future
changes to connection filter buffering could improve the situation IMO
it's just not tenable to manage this workaround.
Ref: https://github.com/curl/curl/issues/657
Ref: https://github.com/curl/curl/pull/668
Ref: https://github.com/curl/curl/pull/720
Ref: https://github.com/curl/curl/issues/9431
Ref: https://github.com/curl/curl/issues/10253
Closes https://github.com/curl/curl/pull/10409
add a small buffer to nghttp2 session sending in order to aggregate
small SETTINGS/PRIO/WIN_UPDATE frames that nghttp2 "writes" to the
callback individually.
Ref: #10389Closes#10432
move Curl_ssl_setup_x509_store() call after the first send (ClientHello)
this gives time to parse CA anchors while waiting on the server reply
Ref: #10389Closes#10432
I believe the code was secure before this, but limiting the accepted
name length to what is used in the structures should help Coverity's
analysis.
Closes#10431
[CWE-570] V560: A part of conditional expression is always false: conn->bits.authneg.
[CWE-570] V560: A part of conditional expression is always false: conn->handler->protocol & (0 | 0).
https://pvs-studio.com/en/docs/warnings/v560/Closes#10399
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
Inspired by the recent fixes to escape.c, we should avoid calling
Curl_dyn_addf() in loops, perhaps in particular when adding something so
simple as %HH codes - for performance reasons. This change makes the
same thing for the URL parser's two URL-encoding loops.
Closes#10384
As a miniscule optimization, treat a path of the length 1 as the same as
non-existing, as it can only be a single leading slash, and that's what
we do for no paths as well.
Closes#10385
1. Add `USE_WOLFSSL` to the TLS backend priority list in
`lib/curl_ntlm_core.c`.
2. Fix `lib/curl_ntlm_core.h` to respect TLS backend priority, bringing
it in sync with the above list and `lib/curl_ntlm_core.c` itself.
Reported-by: Mark Roszko
Ref: https://github.com/curl/curl/issues/10321
3. Allow enabling both wolfSSL and OpenSSL at the same time in
`lib/Makefile.mk` bringing this in line with cmake/autotools builds.
Update logic to select the crypto-specific lib for `ngtcp2`, which
supports a single TLS backend at the same time.
Closes#10322
