Turns out `gnutls_record_send()` does really what the name says: it
sends exactly one TLS record. If more than 16k are there to send, it
needs to be called again with new buffer offset and length.
Continue sending record until the input is all sent or a EAGAIN (or
fatal error) is returned by gnutls.
Closes#14722
This is a better match for what they do and the general "cpool"
var/function prefix works well.
The pool now handles very long hostnames correctly.
The following changes have been made:
* 'struct connectdata', e.g. connections, keep new members
named `destination` and ' destination_len' that fully specifies
interface+port+hostname of where the connection is going to.
This is used in the pool for "bundling" of connections with
the same destination. There is no limit on the length any more.
* Locking: all locks are done inside conncache.c when calling
into the pool and released on return. This eliminates hazards
of the callers keeping track.
* 'struct connectbundle' is now internal to the pool. It is no
longer referenced by a connection.
* 'bundle->multiuse' no longer exists. HTTP/2 and 3 and TLS filters
no longer need to set it. Instead, the multi checks on leaving
MSTATE_CONNECT or MSTATE_CONNECTING if the connection is now
multiplexed and new, e.g. not conn->bits.reuse. In that case
the processing of pending handles is triggered.
* The pool's init is provided with a callback to invoke on all
connections being discarded. This allows the cleanups in
`Curl_disconnect` to run, wherever it is decided to retire
a connection.
* Several pool operations can now be fully done with one call.
Pruning dead connections, upkeep and checks on pool limits
can now directly discard connections and need no longer return
those to the caller for doing that (as we have now the callback
described above).
* Finding a connection for reuse is now done via `Curl_cpool_find()`
and the caller provides callbacks to evaluate the connection
candidates.
* The 'Curl_cpool_check_limits()' now directly uses the max values
that may be set in the transfer's multi. No need to pass them
around. Curl_multi_max_host_connections() and
Curl_multi_max_total_connections() are gone.
* Add method 'Curl_node_llist()' to get the llist a node is in.
Used in cpool to verify connection are indeed in the list (or
not in any list) as they need to.
I left the conncache.[ch] as is for now and also did not touch the
documentation. If we update that outside the feature window, we can
do this in a separate PR.
Multi-thread safety is not achieved by this PR, but since more details
on how pools operate are now "internal" it is a better starting
point to go for this in the future.
Closes#14662
With mbedTLS if the minimum version of TLS is set to 1.3,
MBEDTLS_SSL_VERIFY_OPTIONAL is not available in client mode. See:
https://github.com/Mbed-TLS/mbedtls/blob/2ca6c285/library/ssl_tls.c#L1357
Also, there might be plans to remove it completely in future mbedTLS
versions.
Switch to always use MBEDTLS_SSL_VERIFY_REQUIRED. If verifypeer or
verifyhost are disabled the corresponding error flags are cleared in the
verify callback function. That is also where verification errors are
logged.
Closes#14591
After TLS handshare, indicate which TLS version was negotiated in
addition to the cipher in the handshake completed log message.
Also use the verify callback for certificate logging and collection.
This allows things to work even when MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
is disabled in the mbedtls library.
And lastly, catch certificate validation errors later so we can give the
user more informative error messages that indicate what the failure was
from certificate validation.
Tested on both current LTS versions (2.28 and 3.6).
Closes#14444
Give more detailed reasons for certificate failures where available in
gnutls and wolfssi to allow user to understand the cause of the failure.
Closes#14501
When using CMake Unity build.
- use unique name for `set_ssl_version_min_max()`
Fixes collision between GnuTLS, mbedTLS and SecureTransport.
```
lib\vtls\mbedtls.c(317,1): error C2084: function 'CURLcode set_ssl_version_min_max(Curl_easy *,ssl_peer *,ssl_primary_config *,const char **,const char *)' already has a body
lib\vtls\mbedtls.c(837,49): warning C4133: 'function': incompatible types - from 'Curl_cfilter *' to 'Curl_easy *'
lib\vtls\mbedtls.c(837,53): warning C4133: 'function': incompatible types - from 'Curl_easy *' to 'ssl_peer *'
lib\vtls\mbedtls.c(837,25): error C2198: 'set_ssl_version_min_max': too few arguments for call
```
- use unique name for `do_file_type()`
Fixes collision between GnuTLS, OpenSSL and wolfSSL.
```
lib\vtls\openssl.c(1053,12): error C2084: function 'gnutls_x509_crt_fmt_t do_file_type(const char *)' already has a body
```
Ref: https://github.com/curl/curl/actions/runs/10341162641/job/28622681573?pr=14484#step:10:31
Cherry-picked from #14495Closes#14516
Before, setting CURLOPT_SSLVERSION with wolfSSL restricted the the tls
proto to just the specified version. Now it properly supports a range.
So it can set the min and max tls proto (max requires wolfSSL 4.2.0).
Bump the absolute minimum required version of wolfSSL to 3.4.6 (released
2015) because it is needed for the wolfSSL_CTX_SetMinVersion() function.
Closes#14480
Channel Bindings are used to tie the session context to a specific TLS
channel. This is to provide additional proof of valid identity,
mitigating authentication relay attacks.
Major web servers have the ability to require (None/Accept/Require)
GSSAPI channel binding, rendering Curl unable to connect to such
websites unless support for channel bindings is implemented.
IIS calls this feature Extended Protection (EPA), which is used in
Enterprise environments using Kerberos for authentication.
This change require krb5 >= 1.19, otherwise channel bindings won't be
forwarded through SPNEGO.
Co-Authored-By: Steffen Kieß <947515+steffen-kiess@users.noreply.github.com>
Closes#13098
Bring setting ciphers with WolfSSL in line with other SSL backends,
to make the curl interface more consistent across the backends.
Now the tls1.3 ciphers are set with the --tls13-ciphers option, when
not set the default tls1.3 ciphers are used. The tls1.2 (1.1, 1.0)
ciphers are set with the --ciphers option, when not set the default
tls1.2 ciphers are used. The ciphers available for the connection
are now a union of the tls1.3 and tls1.2 ciphers.
This changes the behaviour for WolfSSL when --ciphers is set, but
--tls13-ciphers is not set. Now the ciphers set with --ciphers
are combined with the default tls1.3 ciphers, whereas before solely
the ciphers of --ciphers were used.
Thus before when no tls1.3 ciphers were specified in --ciphers,
tls1.3 was completely disabled. This might not be what the user
expected, especially as this does not happen with OpenSSL.
Closes#14385
Bring setting ciphers with mbedTLS in line with other SSL backends,
to make the curl interface more consistent across the backends.
Now the tls1.3 ciphers are set with the --tls13-ciphers option, when
not set the default tls1.3 ciphers are used. The tls1.2 (1.1, 1.0)
ciphers are set with the --ciphers option, when not set the default
tls1.2 ciphers are used. The ciphers available for the connection
are now a union of the tls1.3 and tls1.2 ciphers.
This changes the behaviour for mbedTLS when --ciphers is set, but
--tls13-ciphers is not set. Now the ciphers set with --ciphers
are combined with the default tls1.3 ciphers, whereas before solely
the ciphers of --ciphers were used.
Thus before when no tls1.3 ciphers were specified in --ciphers,
tls1.3 was completely disabled. This might not be what the user
expected, especially as this does not happen with OpenSSL.
Closes#14384
- replace the counting of upload lengths with the new eos send flag
- improve frequency of stream draining to happen less on events where it
is not needed
- this PR is based on #14220
http2, cf-h2-proxy: fix EAGAINed out buffer
- in adjust pollset and shutdown handling, a non-empty `ctx->outbufq`
must trigger send polling, irregardless of http/2 flow control
- in http2, fix retry handling of blocked GOAWAY frame
test case improvement:
- let client 'upload-pausing' handle http versions
Closes#14253
Improve handling of shutdown when sending gets blocked.
Add workaround for <https://github.com/wolfSSL/wolfssl/issues/7784>
where wolfSSL keeps on adding close notify messages to its outgoing
buffer on ever attempt.
Closes#14376
Make sure that `io_need` is cleared and set at the filter operations.
Add some more tracing for shutdown situations.
Improve shutdown handling for blocked sends. OpenSSL is a bit tricksy
here that it only reports WANT_WRITE on SSL_shutdown(), but never on
SSL_read() on blocked sends. So we need to use both.
At last, set SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER when available since we
are not always retrying sends from the very same address, as testing
showed.
Closes#14375
wolfSSL supports setting certificates/private keys from memory blobs
which allow us to implement both CURLOPT_SSLCERT_BLOB and
CURLOPT_SSLKEY_BLOB options.
Closes#14018
- For HTTPS if http2-prior-knowledge is set then only offer h2 (HTTP/2)
alpn to the server for protocol negotiation.
Prior to this change both HTTP/2 ("h2") and HTTP/1.1 ("http/1.1") were
offered for ALPN when http2-prior-knowledge was set.
CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE (tool: --http2-prior-knowledge) is
meant to send non-TLS HTTP requests HTTP/2 when it is known the server
supports them. However when HTTPS is used then it attempts to first
negotiate the connection with ALPN. In that case the user likely does
not want to offer http/1.1 to the server as an acceptable protocol.
Reported-by: kit-ty-kate@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/9963
Closes https://github.com/curl/curl/pull/14266
Use these words and casing more consistently across text, comments and
one curl tool output:
AIX, ALPN, ANSI, BSD, Cygwin, Darwin, FreeBSD, GitHub, HP-UX, Linux,
macOS, MS-DOS, MSYS, MinGW, NTLM, POSIX, Solaris, UNIX, Unix, Unicode,
WINE, WebDAV, Win32, winbind, WinIDN, Windows, Windows CE, Winsock.
Mostly OS names and a few more.
Also a couple of other minor text fixups.
Closes#14360
Adds a `bool eos` flag to send methods to indicate that the data
is the last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers
are not yet fully flushed.
Closes#14220
- check that `struct ssl_peer` is only initialized once
- fix vtls peer init to run only once
- check in peer init that hostname is not empty, fail otherwise
Closes#14152
Replace Curl_resolv_unlock() with Curl_resolv_unlink():
-replace inuse member with refcount in Curl_dns_entry
- pass Curl_dns_entry ** to unlink, so it gets always cleared
- solve potential (but unlikley) UAF in FTP's handling of looked up
Curl_dns_entry. Esp. do not use addr information after unlinking an entry.
In reality, the unlink will not free memory, as the dns entry is still
referenced by the hostcache. But this is not safe and relying on no other
code pruning the cache in the meantime.
- pass permanent flag when adding a dns entry instead of fixing timestamp
afterwards.
url.c: fold several static *resolve_* functions into one.
Closes#14195
Fixes:
```
curl\lib\vtls\cipher_suite.c(193,3): error C2220: the following warning is treated as an error
curl\lib\vtls\cipher_suite.c(193,3): warning C4310: cast truncates constant value
```
Closes#14341
Raise the limit for certification information from 10 thousand to 100
thousand bytes. Certificates can be larger than 10k.
Change the infof() debug output to add '...' at the end when the max
limit it can handle is exceeded.
Reported-by: Sergio Durigan Junior
Fixes#14352Closes#14354
The MSVC compiler cannot have forward declaration with const and static
variable, causing this error:
```
curl\lib\vtls\vtls.c(417,44): warning C4132: 'Curl_ssl_multi': const object should be initialized
```
Ref: #14276Closes#14305
When sharing the x509 store in wolfSSL, always use an explicitly
constructed one, as the SSLCTX might have "only" an internal one which
is not obeying reference count lifetimes.
Fixes#14278
Reported-by: Alex Snast
Closes#14279
Adds a `bool eos` flag to send methods to indicate that the data is the
last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers are
not yet fully flushed.
Closes#14220
Fix the file of wolfssl.c because of this warning/error:
```
curl\lib\vtls\wolfssl.c(1017,42): error C2220: the following warning is treated as an error [curl\bld\lib\libcurl_object.vcxproj]
curl\lib\vtls\wolfssl.c(1017,42): warning C4267: 'function': conversion from 'size_t' to 'unsigned long', possible loss of data [curl\bld\lib\libcurl_object.vcxproj]
```
`size_t` in MSVC is different. Change it to `unsigned long` because
`wolfSSL_ERR_error_string_n` last argument is defined as
`unsigned long`.
Closes#14193
Fix `-Wpointer-bool-conversion` warnings with the method suggested by
both Apple clang and mainline llvm. This was already tried and dropped
in #1705 (in year 2017), but the issue reported there no longer
replicates.
Verified with Apple clang 14, llvm 15, llvm 18 and gcc 11, 14 that the
generated objects are bit by bit identical before and after this patch.
Also:
- stop silencing `-Wtautological-pointer-compare`. This warning don't
seem to be appearing anymore (with or without this patch), at least
with the tested compilers and SDKs (clang 13.1.6-16.0.0beta, llvm 15,
18, gcc 11, 14) and minimum macOS target of 10.8. Older targets fail
to build curl with SecureTransport.
- silence `-Wunreachable-code` for clang only. Previously I applied it
also to GCC, by mistake.
Ref: 8d7172d20a
Apple clang `-Wpointer-bool-conversion`:
```
curl/lib/vtls/sectransp.c:1103:6: error: address of function 'SSLCreateContext' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if(SSLCreateContext) { /* use the newer API if available */
~~ ^~~~~~~~~~~~~~~~
curl/lib/vtls/sectransp.c:1103:6: note: prefix with the address-of operator to silence this warning
if(SSLCreateContext) { /* use the newer API if available */
^
&
```
Ref: https://github.com/curl/curl/actions/runs/9819538439/job/27113201384#step:8:382
llvm `-Wpointer-bool-conversion`:
```
curl/lib/vtls/sectransp.c:2663:8: error: address of function 'SSLCreateContext' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if(SSLCreateContext)
~~ ^~~~~~~~~~~~~~~~
curl/lib/vtls/sectransp.c:2663:8: note: prefix with the address-of operator to silence this warning
if(SSLCreateContext)
^
&
```
Ref: https://github.com/curl/curl/actions/runs/9819538439/job/27113200291#step:8:417
gcc still needs `-Waddress` suppressed to avoid these:
```
curl/lib/vtls/n/sectransp.c: In function 'getsubject':
curl/lib/vtls/n/sectransp.c:379:6: warning: the address of 'SecCertificateCopyLongDescription' will always evaluate as 'true' [-Waddress]
379 | if(&SecCertificateCopyLongDescription)
| ^
[...]
```
Follow-up to 59cadacfcc#14128
Follow-up to af271ce9b9#1722
Follow-up to 2b7ce3f56d#1706
Cherry-picked from #14097Closes#14162
