When uploading FTP with unknown length, we write a last 0-length chunk
with the EOS flag set. OpenSSL's SSL_write() errors on such a write.
Skip writing 0-length data to TLS backends instead.
Add test in FTPS for such uploads to verify.
Fixes#15101
Reported-by: Denis Goleshchikhin
Closes#15102
Update IP related information at the connection and the transfer in two
places only: once the filter chain connects and when a transfer is added
to a connection. The latter only updates on reuse when the filters
already are connected.
The only user of that information before a full connect is the HAProxy
filter. Add cfilter CF_QUERY_IP_INFO query to let it find the
information from the filters "below".
This solves two issues with the previous version:
- updates where often done twice with the same info
- happy eyeballing filter "forks" could overwrite each others
updates before the full winner was determined.
Closes#14699
(in debug-builds)
Fix implementation in curl using libuv to process parallel transfers.
Add pytest capabilities to run test cases with --test-event.
- fix uv_timer handling to carry correct 'data' pointing to uv context.
- fix uv_loop handling to reap and add transfers when possible
- fix return code when a transfer errored
Closes#14413
When libcurl discards a connection there are two phases this may go
through: "shutdown" and "closing". If a connection is aborted, the
shutdown phase is skipped and it is closed right away.
The connection filters attached to the connection implement the phases
in their `do_shutdown()` and `do_close()` callbacks. Filters carry now a
`shutdown` flags next to `connected` to keep track of the shutdown
operation.
Filters are shut down from top to bottom. If a filter is not connected,
its shutdown is skipped. Notable filters that *do* something during
shutdown are HTTP/2 and TLS. HTTP/2 sends the GOAWAY frame. TLS sends
its close notify and expects to receive a close notify from the server.
As sends and receives may EAGAIN on the network, a shutdown is often not
successful right away and needs to poll the connection's socket(s). To
facilitate this, such connections are placed on a new shutdown list
inside the connection cache.
Since managing this list requires the cooperation of a multi handle,
only the connection cache belonging to a multi handle is used. If a
connection was in another cache when being discarded, it is removed
there and added to the multi's cache. If no multi handle is available at
that time, the connection is shutdown and closed in a one-time,
best-effort attempt.
When a multi handle is destroyed, all connection still on the shutdown
list are discarded with a final shutdown attempt and close. In curl
debug builds, the environment variable `CURL_GRACEFUL_SHUTDOWN` can be
set to make this graceful with a timeout in milliseconds given by the
variable.
The shutdown list is limited to the max number of connections configured
for a multi cache. Set via CURLMOPT_MAX_TOTAL_CONNECTIONS. When the
limit is reached, the oldest connection on the shutdown list is
discarded.
- In multi_wait() and multi_waitfds(), collect all connection caches
involved (each transfer might carry its own) into a temporary list.
Let each connection cache on the list contribute sockets and
POLLIN/OUT events it's connections are waiting for.
- in multi_perform() collect the connection caches the same way and let
them peform their maintenance. This will make another non-blocking
attempt to shutdown all connections on its shutdown list.
- for event based multis (multi->socket_cb set), add the sockets and
their poll events via the callback. When `multi_socket()` is invoked
for a socket not known by an active transfer, forward this to the
multi's cache for processing. On closing a connection, remove its
socket(s) via the callback.
TLS connection filters MUST NOT send close nofity messages in their
`do_close()` implementation. The reason is that a TLS close notify
signals a success. When a connection is aborted and skips its shutdown
phase, the server needs to see a missing close notify to detect
something has gone wrong.
A graceful shutdown of FTP's data connection is performed implicitly
before regarding the upload/download as complete and continuing on the
control connection. For FTP without TLS, there is just the socket close
happening. But with TLS, the sent/received close notify signals that the
transfer is complete and healthy. Servers like `vsftpd` verify that and
reject uploads without a TLS close notify.
- added test_19_* for shutdown related tests
- test_19_01 and test_19_02 test for TCP RST packets
which happen without a graceful shutdown and should
no longer appear otherwise.
- add test_19_03 for handling shutdowns by the server
- add test_19_04 for handling shutdowns by curl
- add test_19_05 for event based shutdowny by server
- add test_30_06/07 and test_31_06/07 for shutdown checks
on FTP up- and downloads.
Closes#13976
- refs #13556
- allow anon uploads on vsftpd test server
- add test_30_05 for plain upload of 1k, 100k, 1m
- add test_31_05 for SSL upload of 1k, 100k, 1m
- verify file size and contents
Closes#13734
Fixes:
- in uds tests, abort also silently on os errors
- be conservative on the h3 goaway duration
- detect curl debug build and use in checks
- fix caddy version check for slight difference under linux
- set caddy default path fitting for linux
- fix deprecation warnings in valid time checks
FTP tests:
- add '--with-test-vsftpd=path' to configure
- use vsftpd default path suitable for linux
- add test_30 with plain FTP tests
- add test_31 with --ssl-reqd FTP tests
- add vsftpd to linux GHA for pytest workflows
Closes#13661
- add session with destructor callback
- remove vtls `session_free` method
- let `Curl_ssl_addsessionid()` take ownership
of session object, freeing it also on failures
- change tls backend use
- test_17, add tests for SSL session resumption
Closes#13386
- improve info logging when peer verification fails to indicate
if DNS name or ip address has been tried to match
- add test case for contacting https proxy with ip address
- add pytest env check on loaded credentials and re-issue
when they are no longer valid
- disable proxy ip address test for bearssl, since not supported there
Ref: #12831Closes#12838
- there seems to be a code path that cleans up easy handles without
triggering DONE or DETACH events to the connection filters. This
would explain wh nghttp2 still holds stream user data
- add GOOD check to easy handle used in on_close_callback to
prevent crashes, ASSERTs in debug builds.
- NULL the stream user data early before submitting RST
- add checks in on_stream_close() to identify UNGOOD easy handles
Reported-by: Hans-Christian Egtvedt
Fixes#10936Closes#12562
- tunnel https proxy used for http: transfers does
no check if proxy-ssl configuration matches
- test cases added, test_10_12 fails on 8.4.0
Closes#12255
Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
- set CURL_CI for pytest runs in CI environments
- exclude timing sensitive tests from CI runs
- for failed results, list only the log and stat of
the failed transfer
- fix type in http.c comment
Closes#11812
- added test cases for various code paths
- fixed handling of blocked write when stream had
been closed inbetween attempts
- re-enabled DEBUGASSERT on send with smaller data size
- in debug builds, environment variables can be set to simulate a slow
network when sending data. cf-socket.c and vquic.c support
* CURL_DBG_SOCK_WBLOCK: percentage of send() calls that should be
answered with a EAGAIN. TCP/UNIX sockets.
This is chosen randomly.
* CURL_DBG_SOCK_WPARTIAL: percentage of data that shall be written
to the network. TCP/UNIX sockets.
Example: 80 means a send with 1000 bytes would only send 800
This is applied to every send.
* CURL_DBG_QUIC_WBLOCK: percentage of send() calls that should be
answered with EAGAIN. QUIC only.
This is chosen randomly.
Closes#11756
- fix HTTP/2 check to not declare a connection dead when
the read attempt results in EAGAIN
- add H2-PROXY alive check as for HTTP/2 that was missing
and is needed
- add attach/detach around Curl_conn_is_alive() and remove
these in filter methods
- add checks for number of connections used in some test_10
proxy tunneling tests
Closes#11368
- refs #11203 where hyper was reported as being slow
- fixes hyper_executor_poll to loop until it is out of
tasks as advised by @seanmonstar in https://github.com/hyperium/hyper/issues/3237
- added a fix in hyper io handling for detecting EAGAIN
- added some debug logs to see IO results
- pytest http/1.1 test cases pass
- pytest h2 test cases fail on connection reuse. HTTP/2
connection reuse does not seem to work. Hyper submits
a request on a reused connection, curl's IO works and
thereafter hyper declares `Hyper: [1] operation was canceled: connection closed`
on stderr without any error being logged before.
Fixes#11203
Reported-by: Gisle Vanem
Advised-by: Sean McArthur
Closes#11344
- with `--proxy-http2` allow h2 ALPN negotiation to
forward proxies
- applies to http: requests against a https: proxy only,
as https: requests will auto-tunnel
- adding a HTTP/1 request parser in http1.c
- removed h2h3.c
- using new request parser in nghttp2 and all h3 backends
- adding test 2603 for request parser
- adding h2 proxy test cases to test_10_*
scorecard.py: request scoring accidentally always run curl
with '-v'. Removed that, expect double numbers.
labeller: added http1.* and h2-proxy sources to detection
Closes#10967
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
- will check built curl for http and https support and
skip all tests if not there
- will dump stdout/stderr/trace output on errored responses
Closes#10829
- we had a CI case once where `curl` seemingly did not
return and it was hard to guess what happened.
- make curl execution in test cases time out after 60 seconds
Closes#10783
- httpd is only one server we test with
- the suite coveres the HTTP protocol in general where
the default test cases need a more beefy environment
Closes#10654
