Normally, when a connection's filters have all connected, the
multiplex status is determined. However, HTTP/2 Upgrade:
requests will only do this when the first server response
has been received.
The current connection reuse mechanism does not accomodate
that and when the time between connect and response is large
enough, connection reuse may not happen as desired.
See test case 2405 failures, such as in
https://github.com/curl/curl/actions/runs/10629497461/job/29467166451
Add 'conn->bits.asks_multiplex' as indicator that a connection is
still being evaluated for mulitplexing, so that new transfers
may wait on this to be cleared.
Closes#14739
When we downloaded all we wanted, and we did not want a response body,
and no Trailer: has been announced, and the receive gives EAGAIN, do not
hang around unnecessarily.
Some servers are buggy in HEAD processing and fail to send the HTTP/2
EOS. Since we do not need any more data, end the request right there.
This will cause us to send a RST_STREAM to the server.
Fixes#14670
Reported-by: Gruber Glass
Closes#14685
This is a better match for what they do and the general "cpool"
var/function prefix works well.
The pool now handles very long hostnames correctly.
The following changes have been made:
* 'struct connectdata', e.g. connections, keep new members
named `destination` and ' destination_len' that fully specifies
interface+port+hostname of where the connection is going to.
This is used in the pool for "bundling" of connections with
the same destination. There is no limit on the length any more.
* Locking: all locks are done inside conncache.c when calling
into the pool and released on return. This eliminates hazards
of the callers keeping track.
* 'struct connectbundle' is now internal to the pool. It is no
longer referenced by a connection.
* 'bundle->multiuse' no longer exists. HTTP/2 and 3 and TLS filters
no longer need to set it. Instead, the multi checks on leaving
MSTATE_CONNECT or MSTATE_CONNECTING if the connection is now
multiplexed and new, e.g. not conn->bits.reuse. In that case
the processing of pending handles is triggered.
* The pool's init is provided with a callback to invoke on all
connections being discarded. This allows the cleanups in
`Curl_disconnect` to run, wherever it is decided to retire
a connection.
* Several pool operations can now be fully done with one call.
Pruning dead connections, upkeep and checks on pool limits
can now directly discard connections and need no longer return
those to the caller for doing that (as we have now the callback
described above).
* Finding a connection for reuse is now done via `Curl_cpool_find()`
and the caller provides callbacks to evaluate the connection
candidates.
* The 'Curl_cpool_check_limits()' now directly uses the max values
that may be set in the transfer's multi. No need to pass them
around. Curl_multi_max_host_connections() and
Curl_multi_max_total_connections() are gone.
* Add method 'Curl_node_llist()' to get the llist a node is in.
Used in cpool to verify connection are indeed in the list (or
not in any list) as they need to.
I left the conncache.[ch] as is for now and also did not touch the
documentation. If we update that outside the feature window, we can
do this in a separate PR.
Multi-thread safety is not achieved by this PR, but since more details
on how pools operate are now "internal" it is a better starting
point to go for this in the future.
Closes#14662
- Renames Curl_readwrite() to Curl_sendrecv() to reflect that it
is mainly about talking to the server, not reads or writes to the
client. Add a `nowp` parameter since the single caller already
has this.
- Curl_sendrecv() now runs all possible operations whenever it is
called and either it had been polling sockets or the 'select_bits'
are set.
POLL_IN/POLL_OUT are not always directly related to send/recv
operations. Filters like HTTP/2, QUIC or TLS may monitor reverse
directions. If a transfer does not want to send (KEEP_SEND), it
will not do so, as before. Same for receives.
- Curl_update_timer() now checks the absolute timestamp of an expiry
and the last/new timeout to determine if the application needs
to stop/start/restart its timer. This fixes edge cases where
updates did not happen as they should have.
- improved --test-event curl_easy_perform() simulation to handle
situations where no sockets are registered but a timeout is
in place.
- fixed bug in events_socket() that complained about removing
a socket that was unknown, when indeed it had removed the socket
just before, only it was the last in the list
- fixed conncache's internal handle to carry the multi instance
(where the cache has one) so that operations on the closure handle
trigger event callbacks correctly.
- fixed conncache to not POLL_REMOVE a socket twice when a conneciton
was closed.
Closes#14561
- Turned them all into functions to also do asserts etc.
- The llist related structs got all their fields renamed in order to make
sure no existing code remains using direct access.
- Each list node struct now points back to the list it "lives in", so
Curl_node_remove() no longer needs the list pointer.
- Rename the node struct and some of the access functions.
- Added lots of ASSERTs to verify API being used correctly
- Fix some cases of API misuse
Add docs/LLIST.md documenting the internal linked list API.
Closes#14485
Since data can be held in connection filter buffers when sending gives
EAGAIN, add methods to query this and perform flushing of those buffers.
The transfer loop will continue sending until all upload data is
processed and the connection is flushed.
- add `CF_QUERY_SEND_PENDING` to query filters
- add `CF_CTRL_DATA_SEND_FLUSH` to flush filters
- change `Curl_req_want_send()` to query the connection
if it needs flushing
- use `Curl_req_want_send()` to determine the POLLOUT
in the PERFORMING multi state
- implement flush handling in the HTTP/2 connection filter
Closes#14271
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
- When a transfer sets `data->state.select_bits`, it is
scheduled for rerun with EXPIRE_NOW. If such a transfer
is blocked (due to PAUSE, for example), this will lead to
a busy loop.
- multi.c: check for transfer block
- sendf.*: add Curl_xfer_is_blocked()
- sendf.*: add client reader `is_paused()` callback
- implement is_paused()` callback where needed
Closes#13908
- clarify Curl_xfer_setup() with RECV/SEND flags and different calls for
which socket they operate on. Add a shutdown flag for secondary
sockets
- change Curl_xfer_setup() calls to new functions
- implement non-blocking connection shutdown at the end of receiving or
sending a transfer
Closes#13913
`CURLDEBUG` is meant to enable memory tracking, but in a bunch of cases,
it was protecting debug features that were supposed to be guarded with
`DEBUGBUILD`.
Replace these uses with `DEBUGBUILD`.
This leaves `CURLDEBUG` uses solely for its intended purpose: to enable
the memory tracking debug feature.
Also:
- autotools: rely on `DEBUGBUILD` to enable `checksrc`.
Instead of `CURLDEBUG`, which worked in most cases because debug
builds enable `CURLDEBUG` by default, but it's not accurate.
- include `lib/easyif.h` instead of keeping a copy of a declaration.
- add CI test jobs for the build issues discovered.
Ref: https://github.com/curl/curl/pull/13694#issuecomment-2120311894Closes#13718
- HEADERFUNCTIONS might inspect response properties like
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T on seeing the last header line. If
the line is being written before this is initialized, values are not
available.
- write the last header line late when analyzing a HTTP response so that
all information is available at the time of the writing.
- add test1485 to verify that CURLINFO_CONTENT_LENGTH_DOWNLOAD_T works
on seeing the last header.
Fixes#13752
Reported-by: Harry Sintonen
Closes#13757
- as reported in #13725, some servers wrongly send body bytes in
responses to a HEAD request. This used to be tolerated in curl
8.4 and before and leads to failed transfers in newer versions.
- restore previous behaviour for HTTP/1.1 and HTTP/2:
* 1.1: do not add 'Transfer-Encoding' writers from HEAD
responses. RFC 9112 says they do not apply.
* 2: when the transfer expects 'no_body', to not report stream
resets as error when all response headers have been received.
Reported-by: Jeroen Ooms
Fixes#13725Closes#13732
A connection that has seen an HTTP major version now refuses any other
major HTTP version in future responses. Previously, a HTTP/1.x
connection would just silently accept HTTP/2 or HTTP/3 in the status
lines as long as it had support for those built-in. It would then just
lead to confusion and badness.
Indirectly Spotted by CodeSonar which identified a duplicate assignment
in this function.
Add test 471 to verify
Closes#13421
Before this patch `lib/curl_setup.h` defined these two macros right
next to each other, then the source code used them interchangeably.
After this patch, `USE_HTTP3` guards all HTTP/3 / QUIC features.
(Like `USE_HTTP2` does for HTTP/2.) `ENABLE_QUIC` is no longer used.
This patch doesn't change the way HTTP/3 is enabled via autotools
or CMake. Builders who enabled HTTP/3 manually by defining both of
these macros via `CPPFLAGS` can now delete `-DENABLE_QUIC`.
Closes#13352
Reduced size of dynamically_allocated_data structure.
Reduced number of stored values in enum dupstring and enum dupblob. This
affects the reduced array placed in the UserDefined structure.
Closes#13188
- when an application forces HTTP/1.1 chunked transfer encoding
by setting the corresponding header and instructs curl to use
the CURLOPT_READFUNCTION, disregard any POST length information.
- this establishes backward compatibility with previous curl versions
Applications are encouraged to not force "chunked", but rather
set length information for a POST. By setting -1, curl will
auto-select chunked on HTTP/1.1 and work properly on other HTTP
versions.
Reported-by: Jeff King
Fixes#13229Closes#13257
- move code that triggers on end-of-response into separate function from
parsing
- simplify some headp/headerlen usage
- add `httpversion` to SingleRequest to indicate the version of the
current response
Closes#13134
Saving some cpu cycles in http response header processing:
- pass the length of the header line along
- use string constant sizeof() instead of strlen()
- check line length if prefix is possible
- switch on first header char to limit checks
Closes#13143
Move all handling of HTTP's `Expect: 100-continue` feature into a client
reader. Add sending flag `KEEP_SEND_TIMED` that triggers transfer
sending on general events like a timer.
HTTP installs a `CURL_CR_PROTOCOL` reader when announcing `Expect:
100-continue`. That reader works as follows:
- on first invocation, records time, starts the `EXPIRE_100_TIMEOUT`
timer, disables `KEEP_SEND`, enables `KEEP_SEND_TIMER` and returns 0,
eos=FALSE like a paused upload.
- on subsequent invocation it checks if the timer has expired. If so, it
enables `KEEP_SEND` and switches to passing through reads to the
underlying readers.
Transfer handling's `readwrite()` will be invoked when a timer expires
(like `EXPIRE_100_TIMEOUT`) or when data from the server arrives. Seeing
`KEEP_SEND_TIMER`, it will try to upload more data, which triggers
reading from the client readers again. Which then may lead to a new
pausing or cause the upload to start.
Flags and timestamps connected to this have been moved from
`SingleRequest` into the reader's context.
Closes#13110
A transfer may do several `SingleRequest`s for its success. This happens
regularly for authentication, follows and retries on failed connections.
The "readwrite()" calls and functions connected to those carried a `bool
*done` parameter to indicate that the current `SingleRequest` is over.
This may happen before `upload_done` or `download_done` bits of
`SingleRequest` are set.
The problem with that is now `write_resp()` protocol handlers are
invoked in places where the `bool *done` cannot be passed up to the
caller. Instead of being a bool in the call chain, it needs to become a
member of `SingleRequest`, reflecting its state.
This removes the `bool *done` parameter and adds the `done` bit to
`SingleRequest` instead. It adds `Curl_req_soft_reset()` for using a
`SingleRequest` in a follow up, clearing `done` and other
flags/counters.
Closes#13096
- seek_func/seek_client, use transfer values only
- remove copies held in `struct connectdata`, use only
ever `data->set.seek_func`
- resolves possible issues in multiuse connections
- new mime post reader eliminates need to ever overwriting this
- websockets, remove empty Curl_ws_done() function
Closes#13079
Add `mime` client reader. Encapsulates reading from mime parts, getting
their length, rewinding and unpausing.
- remove special mime handling from sendf.c and easy.c
- add general "unpause" method to client readers
- use new reader in http/imap/smtp
- make some mime functions static that are now only used internally
In addition:
- remove flag 'forbidchunk' as no longer needed
Closes#13039
If a response without a status line is received, and the connection is
known to use HTTP/1.x (not HTTP/0.9), report the error "Invalid status
line" instead of "Received HTTP/0.9 when not allowed".
Closes#13045
- update client reader documentation
- client reader, add rewind capabilities
- tell creader to rewind on next start
- Curl_client_reset() will keep reader for future rewind if requested
- add Curl_client_cleanup() for freeing all resources independent of
rewinds
- add Curl_client_start() to trigger rewinds
- move rewind code from multi.c to sendf.c and make part of
"cr-in"'s implementation
- http, move the "resume_from" handling into the client readers
- the setup of a HTTP request is reshuffled to follow:
* determine method, target, auth negotiation
* install the client reader(s) for the request, including crlf
conversions and "chunked" encoding
* apply ranges to client reader
* concat request headers, upgrades, cookies, etc.
* complete request by determining Content-Length of installed
readers in combination with method
* send
- add methods for client readers to
* return the overall length they will generate (or -1 when unknown)
* return the amount of data on the CLIENT level, so that
expect-100 can decide if it want to apply itself
* set a "resume_from" offset or fail if unsupported
- struct HTTP has become largely empty now
- rename `Client_reader_*` to `Curl_creader_*`
Closes#13026
- Move all the "upload_done" handling to request.c
- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean
- removing data->state.ulbuf and data->req.upload_fromhere
- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer
- tftp, remove setting of data->req.upload_fromhere
- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway
- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition
- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending
- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf
Closes#13010
This fixes miscellaneous typos and duplicated words in the docs, lib
and test comments and a few user facing errorstrings.
Author: RainRat on Github
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Dan Fandrich <dan@coneharvesters.com>
Closes: #13019
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk (to be made
into a sperate PR, also)
Added as documented [in
CLIENT-READER.md](5b1f31dfba/docs/CLIENT-READERS.md).
- old `Curl_buffer_send()` completely replaced by new `Curl_req_send()`
- old `Curl_fillreadbuffer()` replaced with `Curl_client_read()`
- HTTP chunked uploads are now formatted in a client reader added when
needed.
- FTP line-end conversions are done in a client reader added when
needed.
- when sending requests headers, remaining buffer space is filled with
body data for sending in "one go". This is independent of the request
body size. Resolves#12938 as now small and large requests have the
same code path.
Changes done to test cases:
- test513: now fails before sending request headers as this initial
"client read" triggers the setup fault. Behaves now the same as in
hyper build
- test547, test555, test1620: fix the length check in the lib code to
only fail for reads *smaller* than expected. This was a bug in the
test code that never triggered in the old implementation.
Closes#12969
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk
The method for sending not just raw bytes, but bytes that are either
"headers" or "body". The send abstraction stack, to to bottom, now is:
* `Curl_req_send()`: has parameter to indicate amount of header bytes,
buffers all data.
* `Curl_xfer_send()`: knows on which socket index to send, returns
amount of bytes sent.
* `Curl_conn_send()`: called with socket index, returns amount of bytes
sent.
In addition there is `Curl_req_flush()` for writing out all buffered
bytes.
`Curl_req_send()` is active for requests without body,
`Curl_buffer_send()` still being used for others. This is because the
special quirks need to be addressed in future parts:
* `expect-100` handling
* `Curl_fillreadbuffer()` needs to add directly to the new
`data->req.sendbuf`
* special body handlings, like `chunked` encodings and line end
conversions will be moved into something like a Client Reader.
In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`,
replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative
values as the returned `CURLcode` already specifies error conditions. This
allows easier handling of lengths without casting.
Closes#12964
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
- from `conn->bits.authneg` to `data->req.authneg`
- this is a property of the request about to be made
and not a property of the connection
- in multiuse connections, transfer could step on each others
toes here potentially.
Closes#12949
- add a client writer that does "push" response
headers written to the client if the headers api
is enabled
- remove special handling in sendf.c
- needs to be installed very early on connection
setup to catch CONNECT response headers
Closes#12880
Remove curl_mimepart object from UserDefined structure when
CURL_DISABLE_MIME flag is active. Reduce size of UserDefined structure.
Also remove unreachable code: when CURL_DISABLE_MIME is set, httpreq can
never have HTTPREQ_POST_MIME value and the same goes for the
CURL_DISABLE_FORM_API flag and the HTTPREQ_POST_FORM value
Closes#12948
When checking if the user wants to replace the header, the check should
be case insensitive.
Adding test 461 to verify
Found-by: Dan Fandrich
Ref: #12782Closes#12784
This clarifies the handling of server responses by folding the code for
the complicated protocols into their protocol handlers. This concerns
mainly HTTP and its bastard sibling RTSP.
The terms "read" and "write" are often used without clear context if
they refer to the connect or the client/application side of a
transfer. This PR uses "read/write" for operations on the client side
and "send/receive" for the connection, e.g. server side. If this is
considered useful, we can revisit renaming of further methods in another
PR.
Curl's protocol handler `readwrite()` method been changed:
```diff
- CURLcode (*readwrite)(struct Curl_easy *data, struct connectdata *conn,
- const char *buf, size_t blen,
- size_t *pconsumed, bool *readmore);
+ CURLcode (*write_resp)(struct Curl_easy *data, const char *buf, size_t blen,
+ bool is_eos, bool *done);
```
The name was changed to clarify that this writes reponse data to the
client side. The parameter changes are:
* `conn` removed as it always operates on `data->conn`
* `pconsumed` removed as the method needs to handle all data on success
* `readmore` removed as no longer necessary
* `is_eos` as indicator that this is the last call for the transfer
response (end-of-stream).
* `done` TRUE on return iff the transfer response is to be treated as
finished
This change affects many files only because of updated comments in
handlers that provide no implementation. The real change is that the
HTTP protocol handlers now provide an implementation.
The HTTP protocol handlers `write_resp()` implementation will get passed
**all** raw data of a server response for the transfer. The HTTP/1.x
formatted status and headers, as well as the undecoded response
body. `Curl_http_write_resp_hds()` is used internally to parse the
response headers and pass them on. This method is public as the RTSP
protocol handler also uses it.
HTTP/1.1 "chunked" transport encoding is now part of the general
*content encoding* writer stack, just like other encodings. A new flag
`CLIENTWRITE_EOS` was added for the last client write. This allows
writers to verify that they are in a valid end state. The chunked
decoder will check if it indeed has seen the last chunk.
The general response handling in `transfer.c:466` happens in function
`readwrite_data()`. This mainly operates now like:
```
static CURLcode readwrite_data(data, ...)
{
do {
Curl_xfer_recv_resp(data, buf)
...
Curl_xfer_write_resp(data, buf)
...
} while(interested);
...
}
```
All the response data handling is implemented in
`Curl_xfer_write_resp()`. It calls the protocol handler's `write_resp()`
implementation if available, or does the default behaviour.
All raw response data needs to pass through this function. Which also
means that anyone in possession of such data may call
`Curl_xfer_write_resp()`.
Closes#12480
