- decouple need to recv/send from negotiation state, we need
this later in shutdown handling as well
- move ssl enums from urldata.h to vtls_int.h
- implement use of `connssl->io_need` in vtls.c. and all backends
Closes#13879
Introduce new notation for CURLOPT_INTERFACE / --interface:
ifhost!<interface>!<host>
Binding to an interface doesn't set the address, and an interface can
have multiple addresses.
When binding to an address (without interface), the kernel is free to
choose the route, and it can route through any device that can access
the target address, not necessarily the one with the chosen address.
Moreover, it is possible for different interfaces to have the same IP
address, on which case we need to provide a way to be more specific.
Factor out the parsing part of interface option, and add unit tests:
1663.
Closes#13719
- Move the code that updates the SO_SNDBUF size for Windows to
cf_socket_send.
Prior to this change the code was in readwrite_upload but the socket
filter is the more appropriate place because it applies to all sends.
Background:
For Windows users SO_SNDBUF (the total per-socket buffer size reserved
by Winsock for sends) is updated dynamically by libcurl during the
transfer. This is because Windows does not do it automatically for
non-blocking sockets and without it the performance of large transfers
may suffer.
Closes https://github.com/curl/curl/pull/13763
`CURLDEBUG` is meant to enable memory tracking, but in a bunch of cases,
it was protecting debug features that were supposed to be guarded with
`DEBUGBUILD`.
Replace these uses with `DEBUGBUILD`.
This leaves `CURLDEBUG` uses solely for its intended purpose: to enable
the memory tracking debug feature.
Also:
- autotools: rely on `DEBUGBUILD` to enable `checksrc`.
Instead of `CURLDEBUG`, which worked in most cases because debug
builds enable `CURLDEBUG` by default, but it's not accurate.
- include `lib/easyif.h` instead of keeping a copy of a declaration.
- add CI test jobs for the build issues discovered.
Ref: https://github.com/curl/curl/pull/13694#issuecomment-2120311894Closes#13718
- add session with destructor callback
- remove vtls `session_free` method
- let `Curl_ssl_addsessionid()` take ownership
of session object, freeing it also on failures
- change tls backend use
- test_17, add tests for SSL session resumption
Closes#13386
Since we can go to the CONNECT state from PENDING, potentially multiple
times for a single transfer, this change introdues a SETUP state that
happens before CONNECT when doing a new transfer.
Now, doing a redirect on a handle goes back to SETUP (not CONNECT like
before) and we initilize the connect timeout etc in SETUP. Previously,
we would do it in CONNECT but that would make it unreliable in cases
where a transfer goes in and out between CONNECT and PENDING multiple
times.
SETUP is transient, so the handle never actually stays in that state.
Additionally: take care of timeouts of PENDING transfers in
curl_multi_perform()
Ref: #13227Closes#13371
Before this patch, two macros were used to guard IPv6 features in curl
sources: `ENABLE_IPV6` and `USE_IPV6`. This patch makes the source use
the latter for consistency with other similar switches.
`-DENABLE_IPV6` remains accepted for compatibility as a synonym for
`-DUSE_IPV6`, when passed to the compiler.
`ENABLE_IPV6` also remains the name of the CMake and `Makefile.vc`
options to control this feature.
Closes#13349
Reduced size of dynamically_allocated_data structure.
Reduced number of stored values in enum dupstring and enum dupblob. This
affects the reduced array placed in the UserDefined structure.
Closes#13188
Move all handling of HTTP's `Expect: 100-continue` feature into a client
reader. Add sending flag `KEEP_SEND_TIMED` that triggers transfer
sending on general events like a timer.
HTTP installs a `CURL_CR_PROTOCOL` reader when announcing `Expect:
100-continue`. That reader works as follows:
- on first invocation, records time, starts the `EXPIRE_100_TIMEOUT`
timer, disables `KEEP_SEND`, enables `KEEP_SEND_TIMER` and returns 0,
eos=FALSE like a paused upload.
- on subsequent invocation it checks if the timer has expired. If so, it
enables `KEEP_SEND` and switches to passing through reads to the
underlying readers.
Transfer handling's `readwrite()` will be invoked when a timer expires
(like `EXPIRE_100_TIMEOUT`) or when data from the server arrives. Seeing
`KEEP_SEND_TIMER`, it will try to upload more data, which triggers
reading from the client readers again. Which then may lead to a new
pausing or cause the upload to start.
Flags and timestamps connected to this have been moved from
`SingleRequest` into the reader's context.
Closes#13110
A transfer may do several `SingleRequest`s for its success. This happens
regularly for authentication, follows and retries on failed connections.
The "readwrite()" calls and functions connected to those carried a `bool
*done` parameter to indicate that the current `SingleRequest` is over.
This may happen before `upload_done` or `download_done` bits of
`SingleRequest` are set.
The problem with that is now `write_resp()` protocol handlers are
invoked in places where the `bool *done` cannot be passed up to the
caller. Instead of being a bool in the call chain, it needs to become a
member of `SingleRequest`, reflecting its state.
This removes the `bool *done` parameter and adds the `done` bit to
`SingleRequest` instead. It adds `Curl_req_soft_reset()` for using a
`SingleRequest` in a follow up, clearing `done` and other
flags/counters.
Closes#13096
new struct ip_quadruple for holding local/remote addr+port
- used in data->info and conn and cf-socket.c
- copy back and forth complete struct
- add 'secondary' to conn
- use secondary in reporting success for ftp 2nd connection
Reported-by: DasKutti on github
Fixes#13084Closes#13090
- seek_func/seek_client, use transfer values only
- remove copies held in `struct connectdata`, use only
ever `data->set.seek_func`
- resolves possible issues in multiuse connections
- new mime post reader eliminates need to ever overwriting this
- websockets, remove empty Curl_ws_done() function
Closes#13079
- update client reader documentation
- client reader, add rewind capabilities
- tell creader to rewind on next start
- Curl_client_reset() will keep reader for future rewind if requested
- add Curl_client_cleanup() for freeing all resources independent of
rewinds
- add Curl_client_start() to trigger rewinds
- move rewind code from multi.c to sendf.c and make part of
"cr-in"'s implementation
- http, move the "resume_from" handling into the client readers
- the setup of a HTTP request is reshuffled to follow:
* determine method, target, auth negotiation
* install the client reader(s) for the request, including crlf
conversions and "chunked" encoding
* apply ranges to client reader
* concat request headers, upgrades, cookies, etc.
* complete request by determining Content-Length of installed
readers in combination with method
* send
- add methods for client readers to
* return the overall length they will generate (or -1 when unknown)
* return the amount of data on the CLIENT level, so that
expect-100 can decide if it want to apply itself
* set a "resume_from" offset or fail if unsupported
- struct HTTP has become largely empty now
- rename `Client_reader_*` to `Curl_creader_*`
Closes#13026
- Move all the "upload_done" handling to request.c
- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean
- removing data->state.ulbuf and data->req.upload_fromhere
- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer
- tftp, remove setting of data->req.upload_fromhere
- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway
- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition
- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending
- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf
Closes#13010
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
Refactoring of the client writer that passes the data to the
client/application's callback functions.
- split out into own source cw-out.[ch] from sendf.c
- move tempwrite and tempcount from data->state into the context of the
client writer
- redesign the 3 tempwrite dynbufs as a linked list of dynbufs. On
paused transfers, this allows to "record" interleaved HEADER/BODY
chunks to be "played back" in the same order on unpausing.
- keep the overall size limit of all buffered data to DYN_PAUSE_BUFFER.
On exceeding that, return CURLE_TOO_LARGE instead of
CURLE_OUT_OF_MEMORY as before.
- add method to be called when a transfer is DONE to allow writing of
any data still buffered
- when paused, record HEADER writes exactly as they come for later
playback. HEADERs are documented to be written one-by-one.
Closes#12898
- from `conn->bits.authneg` to `data->req.authneg`
- this is a property of the request about to be made
and not a property of the connection
- in multiuse connections, transfer could step on each others
toes here potentially.
Closes#12949
Remove curl_mimepart object from UserDefined structure when
CURL_DISABLE_MIME flag is active. Reduce size of UserDefined structure.
Also remove unreachable code: when CURL_DISABLE_MIME is set, httpreq can
never have HTTPREQ_POST_MIME value and the same goes for the
CURL_DISABLE_FORM_API flag and the HTTPREQ_POST_FORM value
Closes#12948
- refs #12397 where it is dicussed how to en-/disable verbose output
of DoH operations
- introducing `struct curl_trc_feat` to track a curl feature for
tracing
- adding `data->state.feat` optionally pointing to the feature a
transfer belongs to
- adding trace functions and verbosity checks on features
- using trace feature in DoH code
- documenting `doh` as feature for `--trace-config`
Closes#12411
- Change the 1 second SO_SNDBUF update limit from per transfer to per
connection.
Prior to this change many transfers over the same connection could cause
many SO_SNDBUF updates made to that connection per second, which was
unnecessary.
Closes https://github.com/curl/curl/pull/12911
- can be borrowed by transfer during recv-write operation
- needs to be released before borrowing again
- adjustis size to `data->set.buffer_size`
- used in transfer.c readwrite_data()
Closes#12805
- remove the ftp special handling from sendf.c
- let ftp_do() add a client writer that does
the linened conversions
- change the lineend conversion to no longer
modify the passed buffer, but write smaller
chunks to the next cwriter instead. The
inefficiency of this will be mitigated once
we add output buffering for all client writes.
Closes#12878
This clarifies the handling of server responses by folding the code for
the complicated protocols into their protocol handlers. This concerns
mainly HTTP and its bastard sibling RTSP.
The terms "read" and "write" are often used without clear context if
they refer to the connect or the client/application side of a
transfer. This PR uses "read/write" for operations on the client side
and "send/receive" for the connection, e.g. server side. If this is
considered useful, we can revisit renaming of further methods in another
PR.
Curl's protocol handler `readwrite()` method been changed:
```diff
- CURLcode (*readwrite)(struct Curl_easy *data, struct connectdata *conn,
- const char *buf, size_t blen,
- size_t *pconsumed, bool *readmore);
+ CURLcode (*write_resp)(struct Curl_easy *data, const char *buf, size_t blen,
+ bool is_eos, bool *done);
```
The name was changed to clarify that this writes reponse data to the
client side. The parameter changes are:
* `conn` removed as it always operates on `data->conn`
* `pconsumed` removed as the method needs to handle all data on success
* `readmore` removed as no longer necessary
* `is_eos` as indicator that this is the last call for the transfer
response (end-of-stream).
* `done` TRUE on return iff the transfer response is to be treated as
finished
This change affects many files only because of updated comments in
handlers that provide no implementation. The real change is that the
HTTP protocol handlers now provide an implementation.
The HTTP protocol handlers `write_resp()` implementation will get passed
**all** raw data of a server response for the transfer. The HTTP/1.x
formatted status and headers, as well as the undecoded response
body. `Curl_http_write_resp_hds()` is used internally to parse the
response headers and pass them on. This method is public as the RTSP
protocol handler also uses it.
HTTP/1.1 "chunked" transport encoding is now part of the general
*content encoding* writer stack, just like other encodings. A new flag
`CLIENTWRITE_EOS` was added for the last client write. This allows
writers to verify that they are in a valid end state. The chunked
decoder will check if it indeed has seen the last chunk.
The general response handling in `transfer.c:466` happens in function
`readwrite_data()`. This mainly operates now like:
```
static CURLcode readwrite_data(data, ...)
{
do {
Curl_xfer_recv_resp(data, buf)
...
Curl_xfer_write_resp(data, buf)
...
} while(interested);
...
}
```
All the response data handling is implemented in
`Curl_xfer_write_resp()`. It calls the protocol handler's `write_resp()`
implementation if available, or does the default behaviour.
All raw response data needs to pass through this function. Which also
means that anyone in possession of such data may call
`Curl_xfer_write_resp()`.
Closes#12480
- let `multi_getsock()` initialize the pollset in what the
transfer state requires in regards to SEND/RECV
- change connection filters `adjust_pollset()` implementation
to react on the presence of POLLIN/-OUT in the pollset and
no longer check CURL_WANT_SEND/CURL_WANT_RECV
- cf-socket will no longer add POLLIN on its own
- http2 and http/3 filters will only do adjustments if the
passed pollset wants to POLLIN/OUT for the transfer on
the socket. This is similar to the HTTP/2 proxy filter
and works in stacked filters.
Closes#12640
Returns the time, in microseconds, during which this transfer was held
in a waiting queue before it started "for real". A transfer might be put
in a queue if after getting started, it cannot create a new connection
etc due to set conditions and limits imposed by the application.
Ref: #12293Closes#12368
- use `data->state.dselect_bits` everywhere instead
- remove `bool *comeback` parameter as non-zero
`data->state.dselect_bits` will indicate that IO is
incomplete.
Closes#12512
Windows compilers define `_WIN32` automatically. Windows SDK headers
or build env defines `WIN32`, or we have to take care of it. The
agreement seems to be that `_WIN32` is the preferred practice here.
Make the source code rely on that to detect we're building for Windows.
Public `curl.h` was using `WIN32`, `__WIN32__` and `CURL_WIN32` for
Windows detection, next to the official `_WIN32`. After this patch it
only uses `_WIN32` for this. Also, make it stop defining `CURL_WIN32`.
There is a slight chance these break compatibility with Windows
compilers that fail to define `_WIN32`. I'm not aware of any obsolete
or modern compiler affected, but in case there is one, one possible
solution is to define this macro manually.
grepping for `WIN32` remains useful to discover Windows-specific code.
Also:
- extend `checksrc` to ensure we're not using `WIN32` anymore.
- apply minor formatting here and there.
- delete unnecessary checks for `!MSDOS` when `_WIN32` is present.
Co-authored-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Closes#12376
- changed header/chunk/handler->readwrite prototypes to accept `buf`,
`blen` and a `pconsumed` pointer. They now get the buffer to work on
and report back how many bytes they consumed
- eliminated `k->str` in SingleRequest
- improved excess data handling to properly calculate with any body data
left in the headerb buffer
- eliminated `k->badheader` enum to only be a bool
Closes#12283
- add `struct ssl_peer` to keep hostname, dispname and sni
for a filter
- allocate `sni` for use in VTLS backend
- eliminate `Curl_ssl_snihost()` and its use of the download buffer
- use ssl_peer in SSL and QUIC filters
Closes#12349
1. Because the value is not strictly set with a setopt option.
2. Because otherwise when duping a handle when all the set.* fields are
first copied and an error happens (think out of memory mid-function),
the function would easily free the list *before* it was deep-copied,
which could lead to a double-free.
Closes#12323
To make it work properly with curl_easy_duphandle(). This, because
duphandle duplicates the entire 'UserDefined' struct by plain copy while
'hstslist' is a linked curl_list of file names. This would lead to a
double-free when the second of the two involved easy handles were
closed.
Closes#12315
This PR has these changes:
Renaming of unencode_* to cwriter, e.g. client writers
- documentation of sendf.h functions
- move max decode stack checks back to content_encoding.c
- define writer phase which was used as order before
- introduce phases for monitoring inbetween decode phases
- offering default implementations for init/write/close
Add type paramter to client writer's do_write()
- always pass all writes through the writer stack
- writers who only care about BODY data will pass other writes unchanged
add RAW and PROTOCOL client writers
- RAW used for Curl_debug() logging of CURLINFO_DATA_IN
- PROTOCOL used for updates to data->req.bytecount, max_filesize checks and
Curl_pgrsSetDownloadCounter()
- remove all updates of data->req.bytecount and calls to
Curl_pgrsSetDownloadCounter() and Curl_debug() from other code
- adjust test457 expected output to no longer see the excess write
Closes#12184
- resolving is done for a connection, not for every transfer
- save create/dup/free of a cares channel for each transfer
- check values of setopt calls against a local channel if no
connection has been attached yet, when needed.
Closes#12198
Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
- use CLIENTWRITE_BODY *only* when data is actually body data
- add CLIENTWRITE_INFO for meta data that is *not* a HEADER
- debug assertions that BODY/INFO/HEADER is not used mixed
- move `data->set.include_header` check into Curl_client_write
so protocol handlers no longer have to care
- add special in FTP for `data->set.include_header` for historic,
backward compatible reasons
- move unpausing of client writes from easy.c to sendf.c, so that
code is in one place and can forward flags correctly
Closes#11885
Not the counter that accumulates all headers over all redirects.
Follow-up to 3ee79c1674
Do a second check for 20 times the limit for the accumulated size for
all headers.
Fixes#11871
Reported-by: Joshix-1 on github
Closes#11872
When the legacy CURLOPT_HTTPPOST option is used, it gets converted into
the modem mimpost struct at first use. This data is (now) kept for the
entire transfer and not only per single HTTP request. This re-enables
rewind in the beginning of the second request instead of in end of the
first, as brought by 1b39731.
The request struct is per-request data only.
Extend test 650 to verify.
Fixes#11680
Reported-by: yushicheng7788 on github
Closes#11682
To avoid abuse. The limit is set to 300 KB for the accumulated size of
all received HTTP headers for a single response. Incomplete research
suggests that Chrome uses a 256-300 KB limit, while Firefox allows up to
1MB.
Closes#11582
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
- state is fully kept at connection, since curl_ws_send() and
curl_ws_rec() have lifetime beyond usual transfers
- no more limit on frame sizes
Reported-by: simplerobot on github
Fixes#10962Closes#10999
Prior to this change STRING_AWS_SIGV4 (CURLOPT_AWS_SIGV4) was wrongly
marked as binary data that could not be duplicated.
Without this fix, this option's value is not copied upon calling
curl_easy_duphandle().
Closes https://github.com/curl/curl/pull/11021
- `drain` was used by http/2 and http/3 implementations to indicate
that the transfer requires send/recv independant from its socket
poll state. Intended as a counter, it was used as bool flag only.
- a similar mechanism exists on `connectdata->cselect_bits` where
specific protocols can indicate something similar, only for the
whole connection.
- `cselect_bits` are cleard in transfer.c on use and, importantly,
also set when the transfer loop expended its `maxloops` tries.
`drain` was not cleared by transfer and the http2/3 implementations
had to take care of that.
- `dselect_bits` is cleared *and* set by the transfer loop. http2/3
does no longer clear it, only set when new events happen.
This change unifies the handling of socket poll overrides, extending
`cselect_bits` by a easy handle specific value and a common treatment in
transfers.
Closes#11005
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
Some IP cameras send malformed RTSP interleaved frames sometimes, which
can cause curl_easy_perform return 1 (CURLE_UNSUPPORTED_PROTOCOL). This
change attempts to skip clearly incorrect RTSP interleaving frame data.
Closes#10808
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
'data->multi' is kept a pointer to the multi handle as long as the easy
handle is actually part of it even when the handle is moved to the
pending/msgsent lists. It needs to know which multi handle it belongs
to, if for example curl_easy_cleanup() is called before the handle is
removed from the multi handle.
Alll 'data->multi' pointers of handles still part of the multi handle
gets cleared by curl_multi_cleanup() which "orphans" all previously
attached easy handles.
This is take 2. The first version was reverted for the 8.0.1 release.
Assisted-by: Stefan Eissing
Closes#10801
For GOOD_EASY_HANDLE and GOOD_MULTI_HANDLE checks
- allow NULL pointers to "just" return an error as before
- fail hard on nun-NULL pointers that no longer show the MAGICs
Closes#10812
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
Assisted-by: Stefan Eissing
Ref: #10743Closes#10762
By letting curl_easy_header() and curl_easy_nextheader() store the
header data in their own struct storage when they return a pointer to
it, it makes it possible for applications to use them both in a loop.
Like the curl tool does.
Reported-by: Boris Okunskiy
Fixes#10704Closes#10707
The feature is rarely used so this frees up data for the vast majority
of easy handles that don't use it.
Rename "protdata" to "ftpwc" since it is always an FTP wildcard struct
pointer. Made the state struct field an unsigned char to save space.
Closes#10639
- Change readwrite_upload() to call win_update_buffer_size() no more
than once a second to update SO_SNDBUF (send buffer limit).
Prior to this change during an upload readwrite_upload() could call
win_update_buffer_size() anywhere from hundreds of times per second to
an extreme test case of 100k per second (which is likely due to a bug,
see #10618). In the latter case WPA profiler showed
win_update_buffer_size was the highest capture count in
readwrite_upload. In any case the calls were excessive and unnecessary.
Ref: https://github.com/curl/curl/pull/2762
Closes https://github.com/curl/curl/pull/10611
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- add test2600 as a unit test that triggers various connect conditions
and monitors behaviour, available in a debug build only.
- this exposed edge cases in connect.c that have been fixed
Closes#10312
- Curl_write_plain/Curl_read_plain have been eliminated. Last code use
now uses Curl_conn_send/recv so that requests use conn->send/revc
callbacks which defaults to cfilters use.
- Curl_recv_plain/Curl_send_plain have been internalized in cf-socket.c.
- USE_RECV_BEFORE_SEND_WORKAROUND (active on Windows) has been moved
into cf-socket.c. The pre_recv buffer is held at the socket filter
context. `postponed_data` structures have been removed from
`connectdata`.
- the hanger in HTTP/2 request handling was a result of read buffering
on all sends and the multi handling is not prepared for this. The
following happens:
- multi preforms on a HTTP/2 easy handle
- h2 reads and processes data
- this leads to a send of h2 data
- which receives and buffers before the send
- h2 returns
- multi selects on the socket, but no data arrives (its in the buffer already)
the workaround now receives data in a loop as long as there is something in
the buffer. The real fix would be for multi to change, so that `data_pending`
is evaluated before deciding to wait on the socket.
io_buffer, optional, in cf-socket.c, http/2 sets state.drain if lower
filter have pending data.
This io_buffer is only available/used when the
-DUSE_RECV_BEFORE_SEND_WORKAROUND is active, e.g. on Windows
configurations. It also maintains the original checks on protocol
handler being HTTP and conn->send/recv not being replaced.
The HTTP/2 (nghttp2) cfilter now sets data->state.drain when it finds
out that the "lower" filter chain has still pending data at the end of
its IO operation. This prevents the processing from becoming stalled.
Closes#10280
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
- by using BIT() instead of bool
- imap: shrink struct
- ftp: make state 'unsigned char'
- ftp: sort ftp_conn struct entries on size
- urldata: use smaller fields for SSL version info storage
- pop3: reduce the pop3_conn struct size
- smtp: reduce the size of the smtp structs
Closes#10186
- copy `struct Curl_addrinfo` on filter setup into context
- remove `struct Curl_addrinfoi *` with `struct Curl_sockaddr_ex *` in
connectdata that is set and NULLed by the socket filter
- this means we have no reference to the resolver info in connectdata or
its filters
- trigger the CF_CTRL_CONN_INFO_UPDATE event when the complete filter
chain reaches connected status
- update easy handle connection information on CF_CTRL_DATA_SETUP event.
Closes#10213
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
The only TLS auth type libcurl ever supported is SRP and that is the
default type. Since nobody ever sets any other type, there is no point
in wasting space to store the set type and code to check the type.
If TLS auth is used, SRP is now implied.
Closes#10181
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
- source_quote, source_prequote and source_postquote have not been used since
5e0d9aea3; September 2006
- make several fields conditional on proxy support
- make three quote struct fields conditional on FTP || SSH
- make 'mime_options' depend on MIME
- make trailer_* fields depend on HTTP
- change 'gssapi_delegation' from long to unsigned char
- make 'localportrange' unsigned short instead of int
- conn->trailer now depends on HTTP
Closes#10147
