- add a DEBUGASSERT for when a transfer's pollset should not be empty.
- move write unpausing from transfer loop into curl_easy_pause. This
make sure that the url_updatesocket() finds the correct state when
updating socket events.
- fix HTTP/2 proxy during connect phase to set sockets correctly
- fix test2600 to simulate a socket set
- move write unpausing from transfer loop into curl_easy_pause. This
make sure that the url_updatesocket() finds the correct state when
updating socket events.
- waiting for the resolver to deliver might not involve any sockets to
wait for. Do not generate a warning.
Fixes#14047Closes#14074
This adds connection shutdown infrastructure and first use for FTP. FTP
data connections, when not encountering an error, are now shut down in a
blocking way with a 2sec timeout.
- add cfilter `Curl_cft_shutdown` callback
- keep a shutdown start timestamp and timeout at connectdata
- provide shutdown timeout default and member in
`data->set.shutdowntimeout`.
- provide methods for starting, interrogating and clearing
shutdown timers
- provide `Curl_conn_shutdown_blocking()` to shutdown the
`sockindex` filter chain in a blocking way. Use that in FTP.
- add `Curl_conn_cf_poll()` to wait for socket events during
shutdown of a connection filter chain.
This gets the monitoring sockets and events via the filters
"adjust_pollset()" methods. This gives correct behaviour when
shutting down a TLS connection through a HTTP/2 proxy.
- Implement shutdown for all socket filters
- for HTTP/2 and h2 proxying to send GOAWAY
- for TLS backends to the best of their capabilities
- for tcp socket filter to make a final, nonblocking
receive to avoid unwanted RST states
- add shutdown forwarding to happy eyeballers and
https connect ballers when applicable.
Closes#13904
Before this patch, two macros were used to guard IPv6 features in curl
sources: `ENABLE_IPV6` and `USE_IPV6`. This patch makes the source use
the latter for consistency with other similar switches.
`-DENABLE_IPV6` remains accepted for compatibility as a synonym for
`-DUSE_IPV6`, when passed to the compiler.
`ENABLE_IPV6` also remains the name of the CMake and `Makefile.vc`
options to control this feature.
Closes#13349
GCC 14 introduces a new -Walloc-size included in -Wextra which gives:
```
src/tool_operate.c: In function ‘add_per_transfer’:
src/tool_operate.c:213:5: warning: allocation of insufficient size ‘1’ for type ‘struct per_transfer’ with size ‘480’ [-Walloc-size]
213 | p = calloc(sizeof(struct per_transfer), 1);
| ^
src/var.c: In function ‘addvariable’:
src/var.c:361:5: warning: allocation of insufficient size ‘1’ for type ‘struct var’ with size ‘32’ [-Walloc-size]
361 | p = calloc(sizeof(struct var), 1);
| ^
```
The calloc prototype is:
```
void *calloc(size_t nmemb, size_t size);
```
So, just swap the number of members and size arguments to match the
prototype, as we're initialising 1 struct of size `sizeof(struct
...)`. GCC then sees we're not doing anything wrong.
Closes#12292
Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
Delete checks and guards for standard C89 headers and assume these are
available: `stdio.h`, `string.h`, `time.h`, `setjmp.h`, `stdlib.h`,
`stddef.h`, `signal.h`.
Some of these we already used unconditionally, some others we only used
for feature checks.
Follow-up to 9c7165e96a#11918 (for `stdio.h` in CMake)
Closes#11940
This was originally added to handle platforms that supported only 1
second granularity in connect timeouts, but after some recent changes
the test currently permafails on several Windows platforms.
The need for this special-case was removed in commit 8627416, which
increased the connect timeout in all cases to well above 1 second.
Fixes#11767Closes#11849
- refs #11355 where failures to to low cpu resources in CI
are reported
- vastly extend CURLOPT_CONNECTTIMEOUT_MS and max durations
to test cases
- trigger Curl_expire() in test filter to allow re-checks before
the usual 1second interval
Closes#11690
- connect timeout was used at half the configured value, if the
destination had 1 ip version 4 and other version 6 addresses
(or the other way around)
- extended test2600 to reproduce these cases
Reported-by: Michael Kaufmann
Fixes#10514Closes#10517
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- add test2600 as a unit test that triggers various connect conditions
and monitors behaviour, available in a debug build only.
- this exposed edge cases in connect.c that have been fixed
Closes#10312
