- make `curl_dependency_option()` more generic.
- extend `CURL_BROTLI` and `CURL_ZSTD` options to accept
`AUTO` in addition to existing `ON` and `OFF`.
- change `CURL_BROTLI` and `CURL_ZSTD` option default
to `AUTO`. Was: `OFF`.
It brings cmake behavior closer to `./configure`.
Still different:
- `./configure` defaults to `off` which means to check default
locations. cmake checks more locations by default.
(Also tried `NO_CMAKE_PATH`, but then it checked less locations.)
- cmake returns both `brotlicommon` and `brotlidec` libs,
while `./configure` only returns the latter.
- ci: drop explicit cmake options, that are now unnecessary.
- GHA/configure-vs-cmake: make adjustments to make tests pass.
Closes#15431
CI:
- GHA/windows: enable OpenSSH server, SysInternals `handle`, `impacket`.
Skip `impacket` on MSYS2 due to install failure.
Skip OpenSSH server for old/standalone mingw-w64 (building curl
without SSH there.)
- GHA/windows: make test tool installs a separate step.
- GHA/cygwin: enable OpenSSH server.
Skip `impacket`: it's compiling for 7 minutes then breaks.
Skip `stunnel` due to sluggish test run performance.
(This update is unrelated to Azure jobs.)
- GHA/linux: migrate Linux jobs from Azure CI.
- GHA/linux: migrate scanbuild job from Azure CI.
- GHA/linux: enable libssh2 in a job. Also enable valgrind.
- CI/windows: enable SSPI in two jobs.
- CI/windows: disable zlib in one more job.
- CI/windows: improve `if` condition checking GnuTLS.
- CI/windows: ignore SFTP/SCP tests as necessary.
- universally ignore SCP tests, they fail everywhere.
- ignore test 612.
- ignore test 613 616 618 with MSYS2 mingw-w64.
- ignore test 614 with libssh.
- ignore all SFTP with MSYS2 native.
- ignore all SFTP with vcpkg with `libssh2[core,zlib]`.
- ignore a couple of SFTP tests with MSYS2 mingw-w64.
(This matches settings on Azure CI.)
- GHA/windows: ignore failing 1451 'Basic SMB request' test for
old mingw-w64 7.3.0 (but not for 9.5.0!):
```
2024-09-11 21:45:59,738 ERROR smbComNegotiate: b'NT LM 0.12\x00' is not in list
[...]
curl: (7) Could not connect to server
[...]
FAIL 1451: 'Basic SMB request' SMB
```
Ref: https://github.com/curl/curl/actions/runs/10816280746/job/30007130770#step:13:3546
- CI/Azure: delete, now moved to GHA.
sshserver:
- sshserver: fix permissions for SSH host key on Windows, allowing sshd
to launch.
- sshserver: fix initializing config paths with Cygwin/MSYS2 sshd.
- sshserver: fix initializing config paths in parallel builds.
- sshserver: delete redundant `DenyUsers`. This also opens the way
to allow multiple usernames.
- sshserver: fix `AllowUsers` for GHA/windows, by allowing the
domainless username again.
Follow-up to 3ee7c676ec#5721
- sshserver: fix `Deprecated option` warnings in `sshd_config`:
```
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 7: Deprecated option AuthorizedKeysFile2
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 25: Deprecated option KeyRegenerationInterval
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 35: Deprecated option RhostsRSAAuthentication
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 36: Deprecated option RSAAuthentication
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 37: Deprecated option ServerKeyBits
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 41: Deprecated option UseLogin
```
- sshserver: fix `Deprecated option` warnings in `ssh_config` with
Cygwin/MSYS2.
- sshserver: fix dumping config files due to the filenames missing their
full paths.
- sshserver: add workaround to make `logmsg` messages visible.
Before this patch they only went to a file and never shown.
runtests:
- runtests: log details when these Windows commands are called:
`handle`, `taskkill`, `tasklist`.
- runtests: add documentation links to Windows tools:
`handle`, `taskkill`, `tasklist`, `icacls`.
- runtests: add `-t` (kill whole tree) option to `taskkill` in
`servers.pm`, syncing it with the other `taskkill` call.
Follow-up to bc72a78a11#14488
- runtests: show warning if Sysinternals `handle` tool is missing.
- runtests: drop Windows XP Home compatibility `tskill` call.
The call was made on all Windows versions. It's possibly overkill to
do this, because XP Home is probably rarely used for running curl
tests these days. In case it's needed, it'd be better to put it under
an explicit option.
- runtests: show Perl version and path.
Fix/silence fallouts:
- unit2603: fix building with disabled HTTP support.
- unit2604: silence `-Woverlength-strings` warnings in C89 mode.
- test437, test1614: fix to pass with no-IPv6 builds.
Closes#14859
This verifies that using older autotools still works. The results of the
autoconf build should end up being identical to the second of the two
cmake builds (the difference in the platform string notwithstanding).
Closes#14816
Implement the `--enable-versioned-symbols` feature available in
`./configure` for CMake.
Enable with `-DCURL_LIBCURL_VERSIONED_SYMBOLS=ON`. Customize the version
prefix with `-DCURL_LIBCURL_VERSIONED_SYMBOLS_PREFIX=MYPREFIX_`. By
default the prefix matches what autotools uses.
When enabled, the feature is detected and a warning shown if
unavailable. (E.g. on Apple and Windows, it isn't.)
Included `HIDDEN {};` to match autotools, though I don't know if it's
necessary, useful or making any difference.
Differences from the autotools implementation:
- soversion is dynamic instead of hard-coded.
- omits referencing non-curl symbols.
- allows prefix/flavour override.
- more universal feature detection.
- doesn't rely on the in-repo `lib/libcurl.vers.in` file.
Also:
- add mbedTLS and BearSSL versioned symbol prefix support to autotools.
- enable this option in an old-linux job.
Follow-up to 7cc2e8b349Fixes#14349Closes#14378
Also:
- fix broken libssh `pkg-config` behaviour on old Linux.
(when found, `LIBSSH_LINK_LIBRARIES` remains undefined.)
- delete manual libssh config from Old Linux CI job,
it's no longer necessary.
Closes#14199
- run tests via `make test-ci` instead of `make check` with autotools.
- add `x86_64` job for FreeBSD, with tests.
It matches the existing Cirrus CI job, with these differences:
- finishes 3x faster (thanks to parallel tests enabled).
- librtmp is not enabled because it's slated for removal by FreeBSD.
(already past the removal deadline, thought the package still
installs.)
- DICT and TELNET servers fail to start. Couldn't figure out why.
It means skipping test 1450 and 1452.
- it runs more tests, e.g. websockets and ip6-localhost.
- no `pkg update -f`.
- it misses the `CRYPTOGRAPHY_DONT_BUILD_RUST=1`, `pkg delete curl`,
`chmod 777`, `sudo -u nobody` and `sysctl net.inet.tcp.blackhole`
tricks. The latter is the default in these runners, the others did
not affect results.
- set `-j0` for tests in the NetBSD job. Flaky otherwise.
Closes#14244
- bump rest of the workflows (windows, macos, distrocheck).
- non-native virtualized envs have 2 CPUs, bump down accordingly.
(for `vmactions/omnios-vm` it's just a guess.)
- bump all to nproc + 1.
Follow-up to e838b341a0#12927Closes#13807
To test without c-ares and hit `easy_lock.h` on an old system. Use this
new build step to introduce small variations, and also test libssh2.
Also add workaround to existing job to enable libssh. (CMake's generic
auto-detection doesn't seem to work here.):
```
CMake Warning at CMakeLists.txt:908 (find_package):
Could not find a package configuration file provided by "libssh" with any
of the following names:
libsshConfig.cmake
libssh-config.cmake
```
Ref: https://github.com/curl/curl/actions/runs/8661316091/job/23750974358#step:5:69Closes#13361
- cmake: fix `-pedantic-errors` for old CMake with `CURL_WERROR=ON` set.
`-pedantic-errors` option throws a warning with GCC (all versions) and
makes `check_symbol_exists()` fail in CMake versions older than
v3.23.0 (2022-03-29), when CMake introduced a workaround:
https://gitlab.kitware.com/cmake/cmake/-/issues/13208eeb45401161ab7c3cd28
Follow-up to 3829759bd0#12489
- set `CURL_WERROR=ON` for the `linux-old` job in CI.
Closes#13282
Unity mode is not supported by CMake v3.7.2 used in linux-old, but
enable it anyway for consistency and to kick in automatically once
migrating to a newer old Linux in the future.
Also:
- replace `CMAKE_COMPILE_WARNING_AS_ERROR` with `CURL_WERROR`.
- delete default build option `PICKY_COMPILER=ON`.
Closes#13277
This version still has ELTS support and contains some old versions of
key components like cmake to help prevent us from breaking that support.
Closes#13029
