This indicates that the file was created by curl which can help a user
determine the origin of a file. Like the other attributes, this is only
enabled with the --xattr option.
Closes#15237
- on load, only replace existing HSTS entries if there is a full host
match
- on matching, prefer a full host match and secondary the longest tail
subdomain match
Closes#15210
For all tests using -O that were previously relying on a debug build and
the CURL_TESTDIR environment variable, use the plain --output-dir option
instead so that they can run proper in non-debug builds.
Closes#15114
By keeping the headers in memory until we know the target file name,
then output them all.
Previously this option combination would cause an error.
Add test 1310 and 1492 to verify. Adjusted test 1460 to work in the new
conditions.
Closes#15110
- add variable for the null device filename and use that in Perl code.
- initialize this variable with `NUL` on native Windows.
- add `%DEV_NULL` variable and use it in tests.
Fixes `The system cannot find the path specified.` messages seen when
running `runtests.pl` with native Windows Perl.
Also adjust code to not break mcedit syntax highlighting.
Cherry-picked from #14949Closes#15098
To ensure Perl invocations within tests call the same Perl binary used
for running the tests, as specified or auto-detected via `PERL` env
(autotools) or `PERL_EXECUTABLE` setting (cmake). Instead of the first
`perl` executable found in `PATH`.)
Cherry-picked from #14949Closes#15097
Before this patch not all tests used `%FILE_PWD` with the `file://`
protocol.
Keep `%PWD` for test1145, to keep it fail on Windows like the test
expects.
Cherry-picked from #14949Closes#15090
Our test servers run either on ipv4 *or* on ipv6, as requested.
A test case using 'localhost' or '*.local' in the url needs to
run with the specific version of the server started.
Otherwise, curl's "happy eyeball"ing will connect to another
server that may be running due to parallel testing or for some
other reasons.
Note that port reuse here depends on the OS strategy and it
seems netbsd is especially likely to hit this.
Closes#15060
Check responsiveness of http/3 server when running.
Also, a test case with http/2 or http/3 server requirement
now implicitly drags in a 'http' server and we need no longer
mention that in testdata.
Closes#15058
The variable FTPTIME2 may, on a loaded test server, become so
large that the timeout does not happen before the fixed 60 seconds
the server waits.
Closes#15056
Windows sometimes has issues when opening the same file twice, so these
test two situations where that could potentially occur.
Reported-by: ralfjunker on github
Ref: #15043Closes#15045
This is the %CLIENT6IP variable - but without outmost brackets since
some commmand lines need the address without the brackets. With this
variable we can run three more tests without prechecks.
Closes#15039
Also introduce 'notexists' for verifying that directory entries do not
exist after a test. Now an explicit supported feature instead of using
"funny" perl in postcheck.
Closes#15046
Use the same fallback for content-disposition cases as for regular -O
Add test692: verify -JO with URL without a file name
Reported-by: Brian Inglis
Fixes#14939Closes#14940
CI:
- GHA/windows: enable OpenSSH server, SysInternals `handle`, `impacket`.
Skip `impacket` on MSYS2 due to install failure.
Skip OpenSSH server for old/standalone mingw-w64 (building curl
without SSH there.)
- GHA/windows: make test tool installs a separate step.
- GHA/cygwin: enable OpenSSH server.
Skip `impacket`: it's compiling for 7 minutes then breaks.
Skip `stunnel` due to sluggish test run performance.
(This update is unrelated to Azure jobs.)
- GHA/linux: migrate Linux jobs from Azure CI.
- GHA/linux: migrate scanbuild job from Azure CI.
- GHA/linux: enable libssh2 in a job. Also enable valgrind.
- CI/windows: enable SSPI in two jobs.
- CI/windows: disable zlib in one more job.
- CI/windows: improve `if` condition checking GnuTLS.
- CI/windows: ignore SFTP/SCP tests as necessary.
- universally ignore SCP tests, they fail everywhere.
- ignore test 612.
- ignore test 613 616 618 with MSYS2 mingw-w64.
- ignore test 614 with libssh.
- ignore all SFTP with MSYS2 native.
- ignore all SFTP with vcpkg with `libssh2[core,zlib]`.
- ignore a couple of SFTP tests with MSYS2 mingw-w64.
(This matches settings on Azure CI.)
- GHA/windows: ignore failing 1451 'Basic SMB request' test for
old mingw-w64 7.3.0 (but not for 9.5.0!):
```
2024-09-11 21:45:59,738 ERROR smbComNegotiate: b'NT LM 0.12\x00' is not in list
[...]
curl: (7) Could not connect to server
[...]
FAIL 1451: 'Basic SMB request' SMB
```
Ref: https://github.com/curl/curl/actions/runs/10816280746/job/30007130770#step:13:3546
- CI/Azure: delete, now moved to GHA.
sshserver:
- sshserver: fix permissions for SSH host key on Windows, allowing sshd
to launch.
- sshserver: fix initializing config paths with Cygwin/MSYS2 sshd.
- sshserver: fix initializing config paths in parallel builds.
- sshserver: delete redundant `DenyUsers`. This also opens the way
to allow multiple usernames.
- sshserver: fix `AllowUsers` for GHA/windows, by allowing the
domainless username again.
Follow-up to 3ee7c676ec#5721
- sshserver: fix `Deprecated option` warnings in `sshd_config`:
```
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 7: Deprecated option AuthorizedKeysFile2
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 25: Deprecated option KeyRegenerationInterval
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 35: Deprecated option RhostsRSAAuthentication
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 36: Deprecated option RSAAuthentication
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 37: Deprecated option ServerKeyBits
D:/a/curl/curl/bld/tests/log/2/server/curl_sshd_config line 41: Deprecated option UseLogin
```
- sshserver: fix `Deprecated option` warnings in `ssh_config` with
Cygwin/MSYS2.
- sshserver: fix dumping config files due to the filenames missing their
full paths.
- sshserver: add workaround to make `logmsg` messages visible.
Before this patch they only went to a file and never shown.
runtests:
- runtests: log details when these Windows commands are called:
`handle`, `taskkill`, `tasklist`.
- runtests: add documentation links to Windows tools:
`handle`, `taskkill`, `tasklist`, `icacls`.
- runtests: add `-t` (kill whole tree) option to `taskkill` in
`servers.pm`, syncing it with the other `taskkill` call.
Follow-up to bc72a78a11#14488
- runtests: show warning if Sysinternals `handle` tool is missing.
- runtests: drop Windows XP Home compatibility `tskill` call.
The call was made on all Windows versions. It's possibly overkill to
do this, because XP Home is probably rarely used for running curl
tests these days. In case it's needed, it'd be better to put it under
an explicit option.
- runtests: show Perl version and path.
Fix/silence fallouts:
- unit2603: fix building with disabled HTTP support.
- unit2604: silence `-Woverlength-strings` warnings in C89 mode.
- test437, test1614: fix to pass with no-IPv6 builds.
Closes#14859
Since ASCII transfers on FTP means sending CRLF line endings, we should
still keep converting them to LF-only on platforms where text files
typically do not use CRLF.
This also DOES NOT convert existing CRLF line endings on ASCII uploads
but only does stand-alone LF => CRLF.
Regression from eeb7c12807 shipped in 8.10.0
Reported-by: finkjsc on github
Fixes#14873Closes#14875
- when server are killed by a test case, do not wait for the server lock
file to go away. These tests are mostly about client timeouts and the
server will hang until killed.
- when killing a server successfully, check for a remaining lock file,
log its existence and remove it.
- lower the delay timings on SLOWDOWN by half
- add SLOWDOWNDATA server command to only slow down the FTP data bytes,
not the control ones.
- lower some timeout values
Closes#14835
The SSL_Session object is mutated during connection inside openssl,
and it might not be thread-safe. Besides, according to documentation
of openssl:
```
SSL_SESSION objects keep internal link information about the session
cache list, when being inserted into one SSL_CTX object's session
cache. One SSL_SESSION object, regardless of its reference count,
must therefore only be used with one SSL_CTX object (and the SSL
objects created from this SSL_CTX object).
```
If I understand correctly, it is not safe to share it even in a
single thread.
Instead, serialize the SSL_SESSION before adding it to the cache,
and deserialize it after retrieving it from the cache, so that no
concurrent write to the same object is infeasible.
Also
- add a ci test for thread sanitizer
- add a test for sharing ssl sessions concurrently
- avoid redefining memory functions when not building libcurl, but
including the soruce in libtest
- increase the concurrent connections limit in sws
Notice that there are fix for a global data race for openssl which
is not yet release. The fix is cherry pick for the ci test with
thread sanitizer.
d8def79838Closes#14751
Some POP3 commands are multi-line, e.g. have responses terminated by a
last line with '.', but some are not. Define the known command
properties and fix response handling.
Add test case for STAT.
Fixes#14677
Reported-by: ralfjunker on github
Closes#14707
When a markdown quoted section using 4-space indentation was converted
to nroff, managen previously caused a newline to appear after the
leading .nf. This fix makes sure that newline is inserted *before* .nf
as intended.
This is perhaps most notable in the HTML version of rendered manpages if
the quoted sections use different colors or similar.
Closes#14732
Extended the test format and runtest.pl so that the verify/upload part
can be marked using crlf newlines even when the client/file does not
have it.
Closes#14717
This is a better match for what they do and the general "cpool"
var/function prefix works well.
The pool now handles very long hostnames correctly.
The following changes have been made:
* 'struct connectdata', e.g. connections, keep new members
named `destination` and ' destination_len' that fully specifies
interface+port+hostname of where the connection is going to.
This is used in the pool for "bundling" of connections with
the same destination. There is no limit on the length any more.
* Locking: all locks are done inside conncache.c when calling
into the pool and released on return. This eliminates hazards
of the callers keeping track.
* 'struct connectbundle' is now internal to the pool. It is no
longer referenced by a connection.
* 'bundle->multiuse' no longer exists. HTTP/2 and 3 and TLS filters
no longer need to set it. Instead, the multi checks on leaving
MSTATE_CONNECT or MSTATE_CONNECTING if the connection is now
multiplexed and new, e.g. not conn->bits.reuse. In that case
the processing of pending handles is triggered.
* The pool's init is provided with a callback to invoke on all
connections being discarded. This allows the cleanups in
`Curl_disconnect` to run, wherever it is decided to retire
a connection.
* Several pool operations can now be fully done with one call.
Pruning dead connections, upkeep and checks on pool limits
can now directly discard connections and need no longer return
those to the caller for doing that (as we have now the callback
described above).
* Finding a connection for reuse is now done via `Curl_cpool_find()`
and the caller provides callbacks to evaluate the connection
candidates.
* The 'Curl_cpool_check_limits()' now directly uses the max values
that may be set in the transfer's multi. No need to pass them
around. Curl_multi_max_host_connections() and
Curl_multi_max_total_connections() are gone.
* Add method 'Curl_node_llist()' to get the llist a node is in.
Used in cpool to verify connection are indeed in the list (or
not in any list) as they need to.
I left the conncache.[ch] as is for now and also did not touch the
documentation. If we update that outside the feature window, we can
do this in a separate PR.
Multi-thread safety is not achieved by this PR, but since more details
on how pools operate are now "internal" it is a better starting
point to go for this in the future.
Closes#14662
Before this patch, `libhostname.so` and `chkhostname` were a test
facility for overriding `gethostname()` in non-debug builds on
Linux and other Unix platforms supporting `LD_PRELOAD`.
`gethostname()` has a single use with SMTP.
The alternative way to override `gethostname()` is building in debug
mode, which allows to do this via the `CURL_GETHOSTNAME` env, on all
platforms.
Drop the `LD_PRELOAD` solution in favour of the above.
Also:
- delete inactive NTLM code with a `gethostname()` call made from it.
- streamline NTLM code by dropping a `printf()` and a macro.
- tests: stop setting `CURL_GETHOSTNAME` where unnecessary.
Closes#14695
The missing message only uses a single line now and has a consistent
prefix making it easier for log parsers to skip. Remove a precheck test
looking for impacket in test1451 because it's incomplete, unnecessary
and in the wrong layer; the test harness will automatically discover
that the smbserver won't start and the test was only checking a single
dependency. Also update the tests README to no longer mention Python 2.
The servers were switched to Python 3 several years ago and no attempt
is being made to maintain Python 2 compatibility
Closes#14669
