This fixes miscellaneous typos and duplicated words in the docs, lib
and test comments and a few user facing errorstrings.
Author: RainRat on Github
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Dan Fandrich <dan@coneharvesters.com>
Closes: #13019
- let `multi_getsock()` initialize the pollset in what the
transfer state requires in regards to SEND/RECV
- change connection filters `adjust_pollset()` implementation
to react on the presence of POLLIN/-OUT in the pollset and
no longer check CURL_WANT_SEND/CURL_WANT_RECV
- cf-socket will no longer add POLLIN on its own
- http2 and http/3 filters will only do adjustments if the
passed pollset wants to POLLIN/OUT for the transfer on
the socket. This is similar to the HTTP/2 proxy filter
and works in stacked filters.
Closes#12640
do not add a socket for POLLIN when the transfer does not want to send
(for example is paused).
Follow-up to 47f5b1a
Reported-by: bubbleguuum on github
Fixes#12632Closes#12633
Prior to this change if a send failed on a stream in an invalid state
(according to quiche) and not marked as closed (according to libcurl)
then the send function would return CURLE_SEND_ERROR.
We already have similar code for ngtcp2 to return CURLE_HTTP3 in this
case.
Caught by test test_07_upload.py: test_07_22_upload_parallel_fail.
Fixes https://github.com/curl/curl/issues/12590
Closes https://github.com/curl/curl/pull/12597
- use `data->state.dselect_bits` everywhere instead
- remove `bool *comeback` parameter as non-zero
`data->state.dselect_bits` will indicate that IO is
incomplete.
Closes#12512
- expecially in is_alive checks on connections, we might
see incoming packets on streams already forgotten and closed,
leading to errors reported by nghttp3. Ignore those.
Closes#12449
- fix cases where ngtcp2 invokes callbacks on streams that
nghttp3 has already forgotten. Ignore the NGHTTP3_ERR_STREAM_NOT_FOUND
in these cases as it is normal behaviour.
Closes#12435
- when a connect immediately goes into DRAINING state, do
not attempt retries in the QUIC connection filter. Instead,
return CURLE_WEIRD_SERVER_REPLY
- When eyeballing, interpret CURLE_WEIRD_SERVER_REPLY as an
inconclusive answer. When all addresses have been attempted,
rewind the address list once on an inconclusive answer.
- refs #11832 where connects were retried indefinitely until
the overall timeout fired
Closes#12400
- build quictls with `no-deprecated` in CI to have test coverage for
this OpenSSL 3 configuration.
- don't call `OpenSSL_add_all_algorithms()`, `OpenSSL_add_all_digests()`.
The caller code is meant for OpenSSL 3, while these two functions were
only necessary before OpenSSL 1.1.0. They are missing from OpenSSL 3
if built with option `no-deprecated`, causing build errors:
```
vtls/openssl.c:4097:3: error: call to undeclared function 'OpenSSL_add_all_algorithms'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
vtls/openssl.c:4098:3: error: call to undeclared function 'OpenSSL_add_all_digests'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
```
Ref: https://ci.appveyor.com/project/curlorg/curl-for-win/builds/48587418?fullLog=true#L7667
Regression from b6e6d4ff8f#12030
Bug: https://github.com/curl/curl/issues/12380#issuecomment-1822944669
Reviewed-by: Alex Bozarth
- vquic/curl_ngtcp2: fix using `SSL_get_peer_certificate` with
`no-deprecated` quictls 3 builds.
Do it by moving an existing solution for this from `vtls/openssl.c`
to `vtls/openssl.h` and adjusting caller code.
```
vquic/curl_ngtcp2.c:1950:19: error: implicit declaration of function 'SSL_get_peer_certificate'; did you mean 'SSL_get1_peer_certificate'? [-Wimplicit-function-declaration]
```
Ref: https://github.com/curl/curl/actions/runs/6960723097/job/18940818625#step:24:1178
- curl_ntlm_core: fix `-Wunused-parameter`, `-Wunused-variable` and
`-Wunused-function` when trying to build curl with NTLM enabled but
without the necessary TLS backend (with DES) support.
Closes#12384
- refs #12356 where a UAF is reported when closing a connection
with a stream whose easy handle was cleaned up already
- handle DETACH events same as DONE events in h2/h3 filters
Fixes#12356
Reported-by: Paweł Wegner
Closes#12364
- add `struct ssl_peer` to keep hostname, dispname and sni
for a filter
- allocate `sni` for use in VTLS backend
- eliminate `Curl_ssl_snihost()` and its use of the download buffer
- use ssl_peer in SSL and QUIC filters
Closes#12349
GCC 14 introduces a new -Walloc-size included in -Wextra which gives:
```
src/tool_operate.c: In function ‘add_per_transfer’:
src/tool_operate.c:213:5: warning: allocation of insufficient size ‘1’ for type ‘struct per_transfer’ with size ‘480’ [-Walloc-size]
213 | p = calloc(sizeof(struct per_transfer), 1);
| ^
src/var.c: In function ‘addvariable’:
src/var.c:361:5: warning: allocation of insufficient size ‘1’ for type ‘struct var’ with size ‘32’ [-Walloc-size]
361 | p = calloc(sizeof(struct var), 1);
| ^
```
The calloc prototype is:
```
void *calloc(size_t nmemb, size_t size);
```
So, just swap the number of members and size arguments to match the
prototype, as we're initialising 1 struct of size `sizeof(struct
...)`. GCC then sees we're not doing anything wrong.
Closes#12292
Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
- configure a 120s idle timeout on our side of the connection
- track the timestamp when actual socket IO happens
- check IO timestamp to our *and* the peer's idle timeouts
in "is this connection alive" checks
Reported-by: calvin2021y on github
Fixes#12064Closes#12077
The default wolfSSL_CTX_load_verify_locations() function is quite picky
with the certificates it loads and will for example return error if just
one of the certs has expired.
With the *_ex() function and its WOLFSSL_LOAD_FLAG_IGNORE_ERR flag, it
behaves more similar to what OpenSSL does by default.
Even the set of default certs on my Debian unstable has several expired
ones.
Assisted-by: Juliusz Sosinowicz
Assisted-by: Michael Osipov
Closes#11987
- requests >64K are send in parts to the filter
- fix parsing of the request to assemble it correctly
from several sends
- open a QUIC stream only when the complete request has
been collected
Closes#11815
- we delay loading the x509 store to shorten the handshake time.
However an application callback installed via CURLOPT_SSL_CTX_FUNCTION
may need to have the store loaded and try to manipulate it.
- load the x509 store before invoking the app callback
Fixes#11800
Reported-by: guoxinvmware on github
Cloes #11805
ngtcp2 v0.19.0 made size of `ecn` member of `ngtcp2_pkt_info`
an `uint8_t` (was: `uint32_t`). Adjust our local cast accordingly.
Fixes:
```
./curl/lib/vquic/curl_ngtcp2.c:1912:12: warning: implicit conversion loses integer precision: 'uint32_t' (aka 'unsigned int') to 'uint8_t' (aka 'unsigned char') [-Wimplicit-int-conversion]
pi.ecn = (uint32_t)ecn;
~ ^~~~~~~~~~~~~
```
Also bump ngtcp2, nghttp3 and nghttp2 to their latest versions in our
docs and CI.
Ref: 80447281bb
Ref: https://github.com/ngtcp2/ngtcp2/pull/877Closes#11798
- refs #11342 where errors with git https interactions
were observed
- problem was caused by 1st sends of size larger than 64KB
which resulted in later retries of 64KB only
- limit sending of 1st block to 64KB
- adjust h2/h3 filters to cope with parsing the HTTP/1.1
formatted request in chunks
- introducing Curl_nwrite() as companion to Curl_write()
for the many cases where the sockindex is already known
Fixes#11342 (again)
Closes#11803
- added test cases for various code paths
- fixed handling of blocked write when stream had
been closed inbetween attempts
- re-enabled DEBUGASSERT on send with smaller data size
- in debug builds, environment variables can be set to simulate a slow
network when sending data. cf-socket.c and vquic.c support
* CURL_DBG_SOCK_WBLOCK: percentage of send() calls that should be
answered with a EAGAIN. TCP/UNIX sockets.
This is chosen randomly.
* CURL_DBG_SOCK_WPARTIAL: percentage of data that shall be written
to the network. TCP/UNIX sockets.
Example: 80 means a send with 1000 bytes would only send 800
This is applied to every send.
* CURL_DBG_QUIC_WBLOCK: percentage of send() calls that should be
answered with EAGAIN. QUIC only.
This is chosen randomly.
Closes#11756
- adding tests using very large passwords in auth
- fixes general http sending to treat h3 like h2, and
not like http1.1
- eliminate H2_HEADER max definitions and use the commmon
DYN_HTTP_REQUEST everywhere, different limits do not help
- fix http2 handling of requests denied by nghttp2 on send
to immediately report the refused stream
Closes#11509
- refs #11389 where IDLE timeouts on upload are reported
- reword ngtcp2 expiry handling to apply to both send+recv
calls into the filter
- EAGAIN uploads similar to the recent changes in HTTP/2, e.g.
report success only when send data was ACKed.
- HOLD sending of EAGAINed uploads to avoid cpu busy loops
- rename internal function for consistency with HTTP/2
implementation
Fixes#11389Closes#11390
- fix HTTP/2 check to not declare a connection dead when
the read attempt results in EAGAIN
- add H2-PROXY alive check as for HTTP/2 that was missing
and is needed
- add attach/detach around Curl_conn_is_alive() and remove
these in filter methods
- add checks for number of connections used in some test_10
proxy tunneling tests
Closes#11368
- Use CURL_FORMAT_CURL_OFF_T where %zd was erroneously used for some
curl_off_t variables.
- Use %zu where %zd was erroneously used for some size_t variables.
Prior to this change some of the Windows CI tests were failing because
in Windows 32-bit targets have a 32-bit size_t and a 64-bit curl_off_t.
When %zd was used for some curl_off_t variables then only the lower
32-bits was read and the upper 32-bits would be read for part or all of
the next specifier.
Fixes https://github.com/curl/curl/issues/11327
Closes https://github.com/curl/curl/pull/11321
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
- ngtcp2 v0.16.0 asserts that timestamps passed to its function
will only ever increase.
- Use a context shared between ingress/egress operations that
uses a shared timestamp, regularly updated during calls.
Closes#11288
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
- ngtcp2 and quiche implementations relied on the DONE_SEND event
to forward the EOF for uploads to the libraries. This often
result in a last 0 length EOF data. Tracking the amount of
data left to upload allows EOF indication earlier.
- refs #11205 where CloudFlare DoH servers did not like to
receive the initial upload DATA without EOF and returned
a 400 Bad Request
Reported-by: Sergey Fionov
Fixes#11205Closes#11207
- compiler analyzer did not include the call context for this
static function where the condition had already been checked.
- eleminating the problem by making stream a call parameter
Fixes#11147Closes#11151
This works around #11138, by doubling the limit, and should be a
relatively safe fix.
Ideally the buffer would grow as needed and there would be no need for a
limit? But that might be follow-up material.
Fixes#11138Closes#11139
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
