Each runner needs a unique random seed to reduce the chance of port
number collisions. The new scheme uses a consistent per-runner source of
randomness which results in deterministic behaviour, as it did before.
Ref: #10818
The main test loop is now able to handle multiple runners, or no
additional runner processes at all. At most one process is still
created, however.
Ref: #10818
... instead of putting them in the regular pid directories because
systems generally have strict length requirements for the path name to
be shorter than 107 bytes and we easily hit that boundary otherwise.
The new concept generates two random names: one for the socks daemon and
one for http.
Reported-by: Andy Fiddaman
Fixes#11152Closes#11166
- leave transfer loop when --limit-rate is in effect and has
been received
- adjust stream window size to --limit-rate plus some slack
to make the server observe the pacing we want
- add test case to confirm behaviour
Closes#11115
... and have curl trim the end when it reaches the expected total amount
of bytes instead of over-sending.
Reported-by: JustAnotherArchivist on github
Closes#11223
This change replaces the previous method of picking a port number at
random to try to start servers on, then retrying up to ten times with
new random numbers each time, with a function that creates a server
socket on port zero, thereby getting a suitable random port set by the
kernel. That server socket is then closed and that port number is used
to setup the actual test server on.
There is a risk that *another* server can be started on the machine in
the time gap, but the server verification feature will detect that.
Closes#11220
- doing a POST with `--digest` does an override on the initial request
with `Content-Length: 0`, but the http2 filter was unaware of that
and expected the originally request body. It did therefore not
send a final DATA frame with EOF flag to the server.
- The fix overrides any initial notion of post size when the `done_send`
event is triggered by the transfer loop, leading to the EOF that
is necessary.
- refs #11194. The fault did not happen in testing, as Apache httpd
never tries to read the request body of the initial request,
sends the 401 reply and closes the stream. The server used in the
reported issue however tried to read the EOF and timed out on the
request.
Reported-by: Aleksander Mazur
Fixes#11194
Cloes #11200
- refs #11157 and #11175 where uploads get stuck or lead to RST streams
- fixes our h2 send behaviour to continue sending in the nghttp2 session
as long as it wants to. This will empty our send buffer as long as
the remote stream/connection window allows.
- in case the window is exhausted, the data remaining in the send buffer
will wait for a WINDOW_UPDATE from the server. Which is a socket event
that engages our transfer loop again
- the problem in the issue was that we did not exhaust the window, but
left data in the sendbuffer and no further socket events did happen.
The server was just waiting for us to send more.
- relatedly, there was an issue fixed that closing a stream with KEEP_HOLD
set kept the transfer from shutting down - as it should have - leading
to a timeout.
Closes#11176
This reverts commit df6c2f7b54.
(It only keep the test case that checks redirection to an absolute URL
without hostname and CURLU_NO_AUTHORITY).
I originally wanted to make CURLU_ALLOW_SPACE accept spaces in the
hostname only because I thought
curl_url_set(CURLUPART_URL, CURLU_ALLOW_SPACE) was already accepting
them, and they were only not being accepted in the hostname when
curl_url_set(CURLUPART_URL) was used for a redirection.
That is not actually the case, urlapi never accepted hostnames with
spaces, and a hostname with a space in it never makes sense.
I probably misread the output of my original test when I they were
normally accepted when using CURLU_ALLOW_SPACE, and not redirecting.
Some other URL parsers seems to allow space in the host part of the URL,
e.g. both python3's urllib.parse module, and Chromium's javascript URL
object allow spaces (chromium percent escapes the spaces with %20),
(they also both ignore TABs, and other whitespace characters), but those
URLs with spaces in the hostname are useless, neither python3's requests
module nor Chromium's window.location can actually use them.
There is no reason to add support for URLs with spaces in the host,
since it was not a inconsistency bug; let's revert that patch before it
makes it into release. Sorry about that.
I also reverted the extra check for CURLU_NO_AUTHORITY since that does
not seem to be necessary, CURLU_NO_AUTHORITY already worked for
redirects.
Closes#11169
These can be interrupted by signals, especially SIGINT to shut down, and
must be restarted so the IPC call arrives correctly. If the read just
returns an error instead, the IPC calling state will go out of sync and
a proper shutdown won't happen.
Ref: #10818
Make send buffer smaller to have progress and "upload done" reporting
closer to reality. Fix handling of send "drain" condition to no longer
trigger once the transfer loop reports it is done sending. Also do not
trigger the send "drain" on RST streams.
Background:
- a upload stall was reported in #11157 that timed out
- test_07_33a reproduces a problem with such a stall if the
server 404s the request and RSTs the stream.
- test_07_33b verifies a successful PUT, using the parameters
from #11157 and checks success
Ref: #11157Closes#11165
It can only be an IPv4 address if all parts are all digits and no more than
four parts, otherwise it is a host name. Even slightly wrong IPv4 will now be
passed through as a host name.
Regression from 17a15d8846 shipped in 8.1.0
Extended test 1560 accordingly.
Reported-by: Pavel Kalyugin
Fixes#11129Closes#11131
curl_url_set(uh, CURLUPART_URL, redirurl, flags) was not respecing
CURLU_ALLOW_SPACE and CURLU_NO_AUTHORITY in the host part of redirurl
when redirecting to an absolute URL.
Closes#11136
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
libcurl assumes that a --continue-at resumption is done to continue an
upload using the read callback and neither --data nor --form use
that and thus won't do what the user wants. Whatever the user wants
with this strange combination.
Add test 426 to verify.
Reported-by: Smackd0wn on github
Fixes#11081Closes#11083
The curl binary argument wasn't being quoted properly. This seems to
have broken at some point after quoting was added in commit 606b29fe.
Reported-by: Daniel Stenberg
Ref: #11073Fixes#11074Closes#11076
When the -j option is given, a new process is spawned in which the test
programs are run and from which test servers are started. Only one
process can be started at once, but this is sufficient to test that the
infrastructure can isolate those functions in a new task. There should
be no visible difference between the two modes at the moment.
Ref: #10818Closes#11064
Program arguments are marshalled and then written to the end of a pipe
which is later read from and the arguments unmarshalled before the
desired function is called normally. The function return values are
then marshalled and written into another pipe when is later read from
and unmarshalled before being returned to the caller.
The implementation is currently blocking but can be made non-blocking
without any changes to the API. This allows calling multiple runners
without blocking in the future.
Ref: #10818
There will soon be multiple log directories so the paths will no longer
be static in runtests.pl. Also, get rid of $SERVER2IN which was not
used.
Ref: #10818
Some recent refactoring made these export no longer necessary. Also,
stop displaying the Unix socket paths at startup since there will soon
be many of them and they're not that interesting.
Ref: #10818
If the previous line starts with if/while/for AND ends with a closed
parenthesis and there's an equal number of open and closed parentheses
on that line, verify that this line is indented $indent more steps, if
not a cpp line.
Also adjust the fall-out from this fix.
Closes#11054
- nghttp2 does not free connection level window flow for
aborted streams
- when closing transfers, make sure that any buffered
response data is "given back" to the flow control window
- add tests test_02_22 and test_02_23 to reproduce
Closes#11052
This is required for the macros there to take effect for system
libraries. Specifically, including the system libraries first led to
warnings about `_FILE_OFFSET_BITS` being redefined in curl_config.h on
the Solaris autobuilds for ws-data.c and ws-pingpong.c.
Also make the curl includes come first for the other source files here
for consistency.
Closes https://github.com/curl/curl/pull/11046
Add both lib/ directories (src & build) to the search path so
curl_setup.h and its dependencies can be found.
Followup-to acd82c8b
Ref: #11006Closes#11036
- Makefile support for building test specific clients in tests/http/clients
- auto-make of clients when invoking pytest
- added test_09_02 for server PUSH_PROMISEs using clients/h2-serverpush
- added test_02_21 for lib based downloads and pausing/unpausing transfers
curl url parser:
- added internal method `curl_url_set_authority()` for setting the
authority part of a url (used for PUSH_PROMISE)
http2:
- made logging of PUSH_PROMISE handling nicer
Placing python test requirements in requirements.txt files
- separate files to base test suite and http tests since use
and module lists differ
- using the files in the gh workflows
websocket test cases, fixes for we and bufq
- bufq: account for spare chunks in space calculation
- bufq: reset chunks that are skipped empty
- ws: correctly encode frames with 126 bytes payload
- ws: update frame meta information on first call of collect
callback that fills user buffer
- test client ws-data: some test/reporting improvements
Closes#11006
- remove the version numbers
- simplify the texts
The date and version number will be put there for releases when maketgz
runs the updatemanpages.pl script.
Closes#11029
The leftmost "label" of the host name can now only match against single
'*'. Like the browsers have worked for a long time.
- extended unit test 1397 for this
- move some SOURCE variables from unit/Makefile.am to unit/Makefile.inc
Reported-by: Hiroki Kurosawa
Closes#11018
Each execution of test 1451 would leave a file in /tmp before. Since
Windows can't delete a file while it's open, all the temporary file
names are stored and deleted on exit.
Closes#10990
