And drop the prefix. This function was not use elsewhere and it should
certainly not be present in libcurl code when not used in the library.
Closes#15796
And use it from src and tests.
Syncing this functionality between platforms and build targets.
Also: Stop redefining `O_BINARY` in src, and use a local macro with
the same effect. `O_BINARY` is used in `CURL_SET_BINMODE()` to decide
if this functionality is supported, and redefining it makes this check
pass always in unity builds. The check is required for Apple OS, because
it offers a `setmode()` function, successfully detected by both CMake
and autotools, but that function has a different functionality and
signature than that expected by `CURL_SET_BINMODE()`.
Also:
- drop MetaWare High C (MS-DOS) support for set binmode.
- tests/libtest/Makefile.inc: dedupe comments.
- lib/curl_setup_once.h: tidy up feature guards for `io.h`, `fcntl.h`.
Ref: #15652Closes#15787
Adjusted test 186 to verify.
Regression in 9664d5a547, shipped in 8.11.1
Reported-by: IcedCoffeee on github
Assisted-by: Jay Satiro
Fixes#15761Closes#15762
In the function for handling 'type=' in the -F command line arguments,
we make the code more lax to accept more strings and thereby also avoid
the use of sscanf().
Closes#15683
Sources used `lib/curlx.h` with both `ENABLE_CURLX_PRINTF` set and unset
before including it.
In a cmake "unity" batch where the first included source had it unset,
the next sources did not get the macros requested with
`ENABLE_CURLX_PRINTF` because `lib/curl.x` had already been included
without them.
Fix it by by making the macros enabled permanently and globally for
internal sources, and dropping `ENABLE_CURLX_PRINTF`.
This came up while testing unity builds with smaller batches. The full,
default unity build where all `src` is bundled up in a single unit, was
not affected.
Fixes:
```
$ cmake -B build -DCMAKE_UNITY_BUILD=ON -DCMAKE_UNITY_BUILD_BATCH_SIZE=15
$ make -C build
...
curl/src/tool_getparam.c: In function ‘getparameter’:
curl/src/tool_getparam.c:2409:11: error: implicit declaration of function ‘msnprintf’; did you mean ‘vsnprintf’? [-Wimplicit-function-declaration]
2409 | msnprintf(buffer, sizeof(buffer), "%" CURL_FORMAT_CURL_OFF_T "-",
| ^~~~~~~~~
| vsnprintf
curl/src/tool_getparam.c:2409:11: warning: nested extern declaration of ‘msnprintf’ [-Wnested-externs]
[...]
```
Reported-by: Daniel Stenberg
Bug: https://github.com/curl/curl/pull/14626#issuecomment-2301663491Closes#14632
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
https://best.openssf.org/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C++.html
as of 2023-11-29 [1].
Enable new recommended warnings (except `-Wsign-conversion`):
- enable `-Wformat=2` for clang (in both cmake and autotools).
- add `CURL_PRINTF()` internal attribute and mark functions accepting
printf arguments with it. This is a copy of existing
`CURL_TEMP_PRINTF()` but using `__printf__` to make it compatible
with redefinting the `printf` symbol:
https://gcc.gnu.org/onlinedocs/gcc-3.0.4/gcc_5.html#SEC94
- fix `CURL_PRINTF()` and existing `CURL_TEMP_PRINTF()` for
mingw-w64 and enable it on this platform.
- enable `-Wimplicit-fallthrough`.
- enable `-Wtrampolines`.
- add `-Wsign-conversion` commented with a FIXME.
- cmake: enable `-pedantic-errors` the way we do it with autotools.
Follow-up to d5c0351055#2747
- lib/curl_trc.h: use `CURL_FORMAT()`, this also fixes it to enable format
checks. Previously it was always disabled due to the internal `printf`
macro.
Fix them:
- fix bug where an `set_ipv6_v6only()` call was missed in builds with
`--disable-verbose` / `CURL_DISABLE_VERBOSE_STRINGS=ON`.
- add internal `FALLTHROUGH()` macro.
- replace obsolete fall-through comments with `FALLTHROUGH()`.
- fix fallthrough markups: Delete redundant ones (showing up as
warnings in most cases). Add missing ones. Fix indentation.
- silence `-Wformat-nonliteral` warnings with llvm/clang.
- fix one `-Wformat-nonliteral` warning.
- fix new `-Wformat` and `-Wformat-security` warnings.
- fix `CURL_FORMAT_SOCKET_T` value for mingw-w64. Also move its
definition to `lib/curl_setup.h` allowing use in `tests/server`.
- lib: fix two wrongly passed string arguments in log outputs.
Co-authored-by: Jay Satiro
- fix new `-Wformat` warnings on mingw-w64.
[1] 56c0fde389/docs/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C%2B%2B.mdCloses#12489
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
- freopen stderr with the user-specified file (--stderr file) instead of
using a separate 'errors' stream.
- In tool_setup.h override stdio.h's stderr macro as global variable
tool_stderr.
Both freopen and overriding the stderr macro are necessary because if
the user-specified filename is "-" then stdout is assigned to
tool_stderr and no freopen takes place. See the PR for more information.
Ref: https://github.com/curl/curl/issues/10491
Closes https://github.com/curl/curl/pull/10673
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
While perfectly legal to do, clobbering function parameters and using
them as local variables is confusing at best and rarely improves code
readability. Fix by using a local variable instead, no functionality
is changed.
This also renames the parameter from data to mime_data since the term
data is (soft) reserved for the easy handle struct.
Closes: #10046
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
This no longer provide functions, only macros. Runs faster and produces
smaller output.
The biggest precaution this change brings:
DO NOT use post/pre-increments when passing arguments to the macros.
Closes#9429
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
This loop was using the number of bytes read from the file as condition
to keep reading.
From Linux's fread(3) man page:
> On success, fread() and fwrite() return the number of items read or
> written. This number equals the number of bytes transferred only when
> size is 1. If an error occurs, or the end of the file is reached, the
> return value is a short item count (or zero).
>
> The file position indicator for the stream is advanced by the number
> of bytes successfully read or written.
>
> fread() does not distinguish between end-of-file and error, and
> callers must use feof(3) and ferror(3) to determine which occurred.
This means that nread!=0 doesn't make much sense as an end condition for
the loop: nread==0 doesn't necessarily mean that EOF has been reached or
an error has occured (but that is usually the case) and nread!=0 doesn't
necessarily mean that EOF has not been reached or that no read errors
have occured. feof(3) and ferror(3) should be uses when using fread(3).
Currently curl has to performs an extra fread(3) call to get a return
value equal to 0 to stop looping.
This usually "works" (even though nread==0 shouldn't be interpreted as
EOF) if stdin is a pipe because EOF usually marks the "real" end of the
stream, so the extra fread(3) call will return immediately and the extra
read syscall won't be noticeable:
bash-5.1$ strace -e read curl -s -F file=@- 0x0.st <<< a 2>&1 |
> tail -n 5
read(0, "a\n", 4096) = 2
read(0, "", 4096) = 0
read(0, "", 4096) = 0
http://0x0.st/oRs.txt
+++ exited with 0 +++
bash-5.1$
But this doesn't work if curl is reading from stdin, stdin is a
terminal, and the EOF is being emulated using a shell with ^D. Two
consecutive ^D will be required in this case to actually make curl stop
reading:
bash-5.1$ curl -F file=@- 0x0.st
a
^D^D
http://0x0.st/oRs.txt
bash-5.1$
A possible workaround to this issue is to use a program that handles EOF
correctly to indirectly send data to curl's stdin:
bash-5.1$ cat - | curl -F file=@- 0x0.st
a
^D
http://0x0.st/oRs.txt
bash-5.1$
This patch makes curl handle EOF properly when using fread(3) in
file2memory() so that the workaround is not necessary.
Since curl was previously ignoring read errors caused by this fread(3),
ferror(3) is also used in the condition of the loop: read errors and EOF
will have the same meaning; this is done to somewhat preserve the old
behaviour instead of making the command fail when a read error occurs.
Closes#8701
In an argument like `-F 'x=@/etc/hostname;filename="foo"abc'` the `abc`
is ignored. This adds a warning if the ignored data isn't all
whitespace.
Closes#7394
- Stick to a single unified way to use structs
- Make checksrc complain on 'typedef struct {'
- Allow them in tests, public headers and examples
- Let MD4_CTX, MD5_CTX, and SHA256_CTX typedefs remain as they actually
typedef different types/structs depending on build conditions.
Closes#5338
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876Closes#3883
Option -F generates an intermediate representation of the mime structure
that is used later to create the libcurl mime structure and generate
the --libcurl statements.
Reported-by: Daniel Stenberg
Fixes#3532Closes#3546
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes#2631
When a zeroed out allocation is required, use calloc() rather than
malloc() followed by an explicit memset(). The result will be the
same, but using calloc() everywhere increases consistency in the
codebase and avoids the risk of subtle bugs when code is injected
between malloc and memset by accident.
Closes https://github.com/curl/curl/pull/2497
Also upgrade test 1133 to cover this case and clarify man page about
form data quoting.
Bug: https://github.com/curl/curl/issues/2022
Reported-By: omau on github
If stdin is not a regular file, its content is memory-buffered to enable
a possible data "rewind".
In all cases, stdin data size is determined before real use to avoid
having an unknown part's size.
--libcurl generated code is left as an unbuffered stdin fread/fseek callback
part with unknown data size.
Buffering is not supported in deprecated curl_formadd() API.
curl_mime_encoder() is operational and documented.
curl tool -F option is extended with ";encoder=".
curl tool --libcurl option generates calls to curl_mime_encoder().
New encoder tests 648 & 649.
Test 1404 extended with an encoder specification.
This feature is badly supported in Windows: as a replacement, a caller has
to use curl_mime_data_cb() with fread, fseek and possibly fclose
callbacks to process opened files.
The cli tool and documentation are updated accordingly.
The feature is however kept internally for form API compatibility, with
the known caveats it always had.
As a side effect, stdin size is not determined by the cli tool even if
possible and this results in a chunked transfer encoding. Test 173 is
updated accordingly.
As the 'error' and 'mute' options are now part of the GlobalConfig,
rather than per Operation, updated the warnf() function to use this
structure rather than the OperationConfig.
