This makes a big difference for cases when the rewind is not actually
necessary to perofm (for example HTTP response code 301 converts to GET)
and therefore the rewind can be avoided. In particular for situations
when that rewind fails, for example when reading from a pipe or similar.
Reported-by: Ali Utku Selen
Fixes#9735Closes#9958
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
The check may take many milliseconds, so now it is performed once the
value is first needed. Also, this change makes sure that the value is
not used if the resolve is set to be IPv4-only.
Closes#9553
Have curl_multi_init() use a much larger DNS hash table than used for
the easy interface to scale and perform better when used with _many_
host names.
curl_share_init() sets an in-between size.
Inspired-by: Ivan Tsybulin
See #9340Closes#9376
First check for errors and return CURLM_UNRECOVERABLE_POLL
before moving forward and waiting on socket readiness events.
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Reported-by: Daniel Stenberg
Ref: #9361
Follow up to #8961Closes#9372
On Windows revents was not populated for extra_fds if
multi_wait had to wait due to the Curl_poll pre-check
not signalling any readiness. This commit fixes that.
Reviewed-by: Marcel Raad
Reviewed-by: Jay Satiro
Closes#9361
Ẃhen it has been used in the multi interface, it is otherwise left in
the connection cache, can't be reused and nothing will close them since
the easy handle loses the association with the multi handle and thus the
connection cache - until the multi handle is closed or it gets pruned
because the cache is full.
Reported-by: Dominik Thalhammer
Fixes#9335Closes#9342
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
Adds two new error codes: CURLE_UNRECOVERABLE_POLL and
CURLM_UNRECOVERABLE_POLL one each for the easy and the multi interfaces.
Reported-by: Harry Sintonen
Fixes#8921Closes#8961
Several years ago a change was made to block user callbacks from calling
back into the API when not supported (recursive calls). One of the calls
blocked was curl_multi_assign. Recently the blocking was extended to the
multi interface API, however curl_multi_assign may need to be called
from within those user callbacks (eg CURLMOPT_SOCKETFUNCTION).
I can't think of any callback where it would be unsafe to call
curl_multi_assign so I removed the restriction entirely.
Reported-by: Michael Wallner
Ref: https://github.com/curl/curl/commit/b46cfbc
Ref: https://github.com/curl/curl/commit/340bb19
Fixes https://github.com/curl/curl/issues/8480
Closes https://github.com/curl/curl/pull/8483
Fix a bug that does not require a new CVE as discussed on hackerone.com.
Previously `connection_id` was accessed after returning connection to
the shared pool.
Bug: https://hackerone.com/reports/1463013Closes#8355
1. The function would only ever return CURLE_OK anyway
2. Only one caller actually used the return code
3. Most callers did (void)Curl_disconnect()
Closes#8303
This makes most libcurl functions return error if called from within a
callback using the same multi handle. For example timer or socket
callbacks calling curl_multi_socket_action.
Reported-by: updatede on github
Fixes#8282Closes#8286
Since each socket hash entry may themselves have a hash table in them,
the destroying of the socket hash needs to make sure all the subhashes
are also correctly destroyed to avoid leaking memory.
Fixes#8129Closes#8131
The callbacks were partially documented to support this. Now the
behavior is documented and returning error from either of these
callbacks will effectively kill all currently ongoing transfers.
Added test 530 to verify
Reported-by: Marcelo Juchem
Fixes#8083Closes#8089
Triggered before a request is made but after a connection is set up
Changes:
- callback: Update docs and callback for pre-request callback
- Add documentation for CURLOPT_PREREQDATA and CURLOPT_PREREQFUNCTION,
- Add redirect test and callback failure test
- Note that the function may be called multiple times on a redirection
- Disable new 2086 test due to Windows weirdness
Closes#7477
The VALID_SOCK() macro was made to only check for FD_SETSIZE if curl was
built to use select(), even though the curl_multi_fdset() function
always and unconditionally uses FD_SET and needs the check.
Reported-by: 0xee on github
Fixes#7718Closes#7719
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
- Check whether a connection has succeded before checking whether it's
timed out.
This means if we've connected quickly, but subsequently been
descheduled, we allow the connection to succeed. Note, if we timeout,
but between checking the timeout, and connecting to the server the
connection succeeds, we will allow it to go ahead. This is viewed as
an acceptable trade off.
- Add additional failf logging around failed connection attempts to
propogate the cause up to the caller.
Co-Authored-by: Martin Howarth
Closes#7178
scan-build-6 otherwise warns, saying: warning: The left operand of '>='
is a garbage value otherwise, which is false.
Later scan-builds don't claim this on the same code.
Closes#7248
The libssh2 backend has SSH session associated with the connection but
the callback context is the easy handle, so when a connection gets
attached to a transfer, the protocol handler now allows for a custom
function to get used to set things up correctly.
Reported-by: Michael O'Farrell
Fixes#6898Closes#7078
Also added 'CURL_SMALLSENDS' to make Curl_write() send short packets,
which helped verifying this even more.
Add test 363 to verify.
Reported-by: ustcqidi on github
Fixes#6950Closes#7024
Reset FD_WRITE by sending zero bytes which is permissible
and will be treated by implementations as successful send.
Without this we won't be notified in case a socket is still
writable if we already received such a notification and did
not send any data afterwards on the socket. This would lead
to waiting forever on a writable socket being writable again.
Assisted-by: Tommy Odom
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Tested-by: tmkk on github
Bug: #6146Closes#6245
1. Consolidate pre-checks into a single Curl_poll call:
This is an attempt to restructure the code in Curl_multi_wait
in such a way that less syscalls are made by removing individual
calls to Curl_socket_check via SOCKET_READABLE/SOCKET_WRITABLE.
2. Avoid resetting the WinSock event multiple times:
We finally call WSAResetEvent anyway, so specifying it as
an optional parameter to WSAEnumNetworkEvents is redundant.
3. Wakeup directly in case no sockets are being monitoring:
Fix the WinSock based implementation to skip extra waiting by
not sleeping in case no sockets are to be waited on and just
the WinSock event is being monitored for wakeup functionality.
Assisted-by: Tommy Odom
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Bug: #6146Closes#6245
This reverts commit 2260e0ebe6,
also restoring previous follow up changes which were reverted.
Authored-by: rcombs on github
Authored-by: Marc Hörsken
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Restores #5634
Reverts #6281
Part of #6245
The ConnectionExists() function will note that the new transfer wants
less then h2 and that it can't multiplex it and therefor opt to open a
new connection instead.
Storing a stream error in the per-connection struct was an error that lead to
race conditions as subsequent stream handling could overwrite the error code
before it was used for the stream with the actual problem.
Closes#6910
Both were used for the same purposes and there was no logical separation
between them. Combined, this also saves 16 bytes in less holes in my
test build.
Closes#6798
Otherwise libcurl is likely to reuse the connection again in the next
attempt since the connection reuse logic doesn't take downgrades into
account.
Reported-by: Anthony Ramine
Fixes#6788Closes#6793
