It can only be an IPv4 address if all parts are all digits and no more than
four parts, otherwise it is a host name. Even slightly wrong IPv4 will now be
passed through as a host name.
Regression from 17a15d8846 shipped in 8.1.0
Extended test 1560 accordingly.
Reported-by: Pavel Kalyugin
Fixes#11129Closes#11131
curl_url_set(uh, CURLUPART_URL, redirurl, flags) was not respecing
CURLU_ALLOW_SPACE and CURLU_NO_AUTHORITY in the host part of redirurl
when redirecting to an absolute URL.
Closes#11136
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
libcurl assumes that a --continue-at resumption is done to continue an
upload using the read callback and neither --data nor --form use
that and thus won't do what the user wants. Whatever the user wants
with this strange combination.
Add test 426 to verify.
Reported-by: Smackd0wn on github
Fixes#11081Closes#11083
The curl binary argument wasn't being quoted properly. This seems to
have broken at some point after quoting was added in commit 606b29fe.
Reported-by: Daniel Stenberg
Ref: #11073Fixes#11074Closes#11076
When the -j option is given, a new process is spawned in which the test
programs are run and from which test servers are started. Only one
process can be started at once, but this is sufficient to test that the
infrastructure can isolate those functions in a new task. There should
be no visible difference between the two modes at the moment.
Ref: #10818Closes#11064
Program arguments are marshalled and then written to the end of a pipe
which is later read from and the arguments unmarshalled before the
desired function is called normally. The function return values are
then marshalled and written into another pipe when is later read from
and unmarshalled before being returned to the caller.
The implementation is currently blocking but can be made non-blocking
without any changes to the API. This allows calling multiple runners
without blocking in the future.
Ref: #10818
There will soon be multiple log directories so the paths will no longer
be static in runtests.pl. Also, get rid of $SERVER2IN which was not
used.
Ref: #10818
Some recent refactoring made these export no longer necessary. Also,
stop displaying the Unix socket paths at startup since there will soon
be many of them and they're not that interesting.
Ref: #10818
If the previous line starts with if/while/for AND ends with a closed
parenthesis and there's an equal number of open and closed parentheses
on that line, verify that this line is indented $indent more steps, if
not a cpp line.
Also adjust the fall-out from this fix.
Closes#11054
- nghttp2 does not free connection level window flow for
aborted streams
- when closing transfers, make sure that any buffered
response data is "given back" to the flow control window
- add tests test_02_22 and test_02_23 to reproduce
Closes#11052
This is required for the macros there to take effect for system
libraries. Specifically, including the system libraries first led to
warnings about `_FILE_OFFSET_BITS` being redefined in curl_config.h on
the Solaris autobuilds for ws-data.c and ws-pingpong.c.
Also make the curl includes come first for the other source files here
for consistency.
Closes https://github.com/curl/curl/pull/11046
Add both lib/ directories (src & build) to the search path so
curl_setup.h and its dependencies can be found.
Followup-to acd82c8b
Ref: #11006Closes#11036
- Makefile support for building test specific clients in tests/http/clients
- auto-make of clients when invoking pytest
- added test_09_02 for server PUSH_PROMISEs using clients/h2-serverpush
- added test_02_21 for lib based downloads and pausing/unpausing transfers
curl url parser:
- added internal method `curl_url_set_authority()` for setting the
authority part of a url (used for PUSH_PROMISE)
http2:
- made logging of PUSH_PROMISE handling nicer
Placing python test requirements in requirements.txt files
- separate files to base test suite and http tests since use
and module lists differ
- using the files in the gh workflows
websocket test cases, fixes for we and bufq
- bufq: account for spare chunks in space calculation
- bufq: reset chunks that are skipped empty
- ws: correctly encode frames with 126 bytes payload
- ws: update frame meta information on first call of collect
callback that fills user buffer
- test client ws-data: some test/reporting improvements
Closes#11006
- remove the version numbers
- simplify the texts
The date and version number will be put there for releases when maketgz
runs the updatemanpages.pl script.
Closes#11029
The leftmost "label" of the host name can now only match against single
'*'. Like the browsers have worked for a long time.
- extended unit test 1397 for this
- move some SOURCE variables from unit/Makefile.am to unit/Makefile.inc
Reported-by: Hiroki Kurosawa
Closes#11018
Each execution of test 1451 would leave a file in /tmp before. Since
Windows can't delete a file while it's open, all the temporary file
names are stored and deleted on exit.
Closes#10990
- state is fully kept at connection, since curl_ws_send() and
curl_ws_rec() have lifetime beyond usual transfers
- no more limit on frame sizes
Reported-by: simplerobot on github
Fixes#10962Closes#10999
- `drain` was used by http/2 and http/3 implementations to indicate
that the transfer requires send/recv independant from its socket
poll state. Intended as a counter, it was used as bool flag only.
- a similar mechanism exists on `connectdata->cselect_bits` where
specific protocols can indicate something similar, only for the
whole connection.
- `cselect_bits` are cleard in transfer.c on use and, importantly,
also set when the transfer loop expended its `maxloops` tries.
`drain` was not cleared by transfer and the http2/3 implementations
had to take care of that.
- `dselect_bits` is cleared *and* set by the transfer loop. http2/3
does no longer clear it, only set when new events happen.
This change unifies the handling of socket poll overrides, extending
`cselect_bits` by a easy handle specific value and a common treatment in
transfers.
Closes#11005
Log messages generated with logmsg can now be buffered and returned from
the runner as a return value. This will be needed with parallel testing
to allow all messages for one test to be displayed together instead of
interspersed with messages of multiple tests. Buffering can be disabled
by setting a logging callback function with setlogfunc, which is
currently being done to preserve existing logging behaviour for now.
Some additional output is generated in verbose and debugprotocol modes,
which don't always use logmsg. These modes also impact some servers
which generate extra messages. No attempt is made to buffer everything
if these modes are enabled.
Ref: #10818Closes#11016
This is closer to the place where logs are displayed on test failure.
Also, only display these logs if -p is given, which is the same flag
that controls display of test failure logs. Some server log files
need to be deleted later so that they stay around long enough to be
displayed on failure.
Ref: #10818
This is currently useful for starting a test server on its own without
an associated test, which can be used for interactive curl testing or
for validating parts of the test harness itself. More commands can be
added to perform additional functions in the future.
Ref: #10818Closes#11008
The test loop now has an initial loop that first runs through all
possible tests to build a set of those to attempt on this run based on
features and keywords and only then goes through that new list to run
them. This actually makes it three loops through all tests cases, as
there is an existing loop that gathers possible test numbers from the
test files on disk.
This has two minor effects on the output: all the tests that will be
skipped are displayed at the start (instead of being interspersed with
other tests) and the -l option no longer shows a count of tests at the
end or a (misleading) statement that tests have run successfully. The
skipped tests are also omitted from the test results sent to AppVeyor
and Azure in CI builds.
Another effect is a reduction in the amount of work considered part of
the "Test definition reading and preparation time" reported with -r
making those figures slightly lower than before.
Ref: #10818
Test 1442's name was not quoted correctly so wasn't registered in
Appveyor and it had the wrong name in Azure. The JSON string quotes were
also invalid, even though both servers happened to accept it regardless.
Closes#11010
The server ports are chosen randomly for each server, but the random
ranges chosen were inconsistently-sized and overlapping. Now, they are
spread out more so at least the first random port chosen for each server
is guaranteed to not also be chosen by another server. The starting port
numbers are also raised to put them in the Ephemeral Port range—not the
range defined by RFC 6335 but the one used by Linux, which starts lower
and gives us more room to work with.
Reported-by: Daniel Stenberg
Calling stopserver() before retrying stunnel due to an error would stop
the dependent server (such as HTTP) meaning stunnel would have nothing
to talk to when it came up. Don't try to force a stop when it didn't
actually start. Also, don't mark the server as bad for future use when
it starts up on a retry.
Reported-by: eaglegai at github
Tested-by: eaglegai at github
Fixes#10976
If a server couldn't be started on a port, a new one is randomly chosen
and the server is tried again. Avoid accidentally using a
randomly-chosen 0 port offset by adding 1 to the random number.
Found-by: Daniel Stenberg
This reduces the startup time when there is a known conflict on the
random port chosen for a server. This was already done for stunnel, but
now it's done for all servers.
testutil.pm now contains a few miscellaneous functions that are used in
several places but have no better place to live. subvariables moves to
servers.pm since most variables that it substitutes relate to servers,
so this is the most appropriate place. Rename a few functions for better
naming consistency.
Ref: #10818Closes#10995
