Because of how libssh2_userauth_keyboard_interactive_ex() works: the
libcurl callback allocates memory that is later free()d by libssh2, we
must set the custom memory functions.
Reverts 8b5f100db3
Ref: https://github.com/libssh2/libssh2/issues/1078Closes#11235
Hook the new (1.11.0 or newer) libssh2 support for setting a read timeout
into the SERVER_RESPONSE_TIMEOUT option. With this done, clients can use
the standard curl response timeout setting to also control the time that
libssh2 will wait for packets from a slow server. This is necessary to
enable use of very slow SFTP servers.
Signed-off-by: Daniel Silverstone <daniel.silverstone@codethink.co.uk>
Closes#10965
- Always set the libssh2 'abstract' user-pointer to the libcurl easy
handle associated with the ssh session, so it is always passed to the
ssh keyboard callback.
Prior to this change and since 8b5f100 (precedes curl 8.0.0), if libcurl
was built without CURL_DEBUG then it could crash during the ssh auth
phase due to a null dereference in the ssh keyboard callback.
Reported-by: Andreas Falkenhahn
Fixes https://github.com/curl/curl/pull/11024
Closes https://github.com/curl/curl/pull/11026
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
This makes us debug libssh2 less and libcurl more when for example
running torture tests that otherwise will spend a lot of time in libssh2
functions.
We leave libssh2 to test libssh2.
Closes#10721
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
As is supported by recent libssh2, but should just be ignored by older
versions.
Reported-by: norbertmm on github
Assisted-by: norbertmm on github
Fixes#10143Closes#10145
Commit 3b16575ae9 removed support for
building on Novell Netware, but a few leftover traces remained. This
removes the last bits.
Closes: #9966
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
This struct field MUST remain what the application set it to, so that
handle reuse and handle duplication work.
Instead, the request state bit 'no_body' is introduced for code flows
that need to change this in run-time.
Closes#9888
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
Instances of ISSPACE() use that should rather use ISBLANK(). I think
somewhat carelessly used because it sounds as if it checks for space or
whitespace, but also includes %0a to %0d.
For parsing purposes, we should only accept what we must and not be
overly liberal. It leads to surprises and surprises lead to bad things.
Closes#9432
Since the libssh2 API uses 'long' to store the timestamp, it cannot
transfer >32bit times on Windows and 32bit architecture builds.
Avoid nasty surprises by instead not setting such time.
Spotted by Coverity
Closes#9325
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
The callback set by CURLOPT_SSH_HOSTKEYFUNCTION is called to check
wether or not the connection should continue.
The host key is passed in argument with a custom handle for the
application.
It overrides CURLOPT_SSH_KNOWNHOSTS
Closes#7959
Making it just skip the check unless exactly 32 is too brittle. Even if
the docs says it needs to be exactly 32, it is be safer to make the
comparison fail here instead.
Reported-by: Harry Sintonen
Bug: https://hackerone.com/reports/1549461Closes#8745
Ensure that all infof calls with a warning message are capitalized
in the same way. At some point we should probably set up a style-
guide for infof but until then let's aim for a little consistenncy
where we can.
Closes: #8711
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Previously this code used a compile time constant, meaning that libcurl
always reported the libssh2 version that libcurl was built with. This
could differ from the libssh2 version actually being used. The new code
uses the CURL_LIBSSH2_VERSION macro, which is defined in ssh.h. The
macro calls the libssh2_version function if it is available, otherwise
it falls back to the compile time version.
Closes https://github.com/curl/curl/pull/7768
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
The libssh2 backend has SSH session associated with the connection but
the callback context is the easy handle, so when a connection gets
attached to a transfer, the protocol handler now allows for a custom
function to get used to set things up correctly.
Reported-by: Michael O'Farrell
Fixes#6898Closes#7078
... to avoid memory leaks!
libssh2 is tricky as we have to deal with the non-blockiness even in
close and shutdown cases. In the cases when we shutdown after a timeout
already expired, it is crucial that curl doen't let the timeout abort
the shutdown process as that then leaks memory!
Reported-by: Benjamin Riefenstahl
Fixes#6990
After the recent conn/data refactor in this source file, this function
was mistakenly still getting the old struct pointer which would lead to
crash on servers with keyboard-interactive auth enabled.
Follow-up to a304051620 (shipped in 7.75.0)
Reported-by: Christian Schmitz
Fixes#6691Closes#6782
If libssh2_knownhost_init() returns NULL, like in an OOM situation, the
ssh session was freed but the pointer wasn't cleared which made libcurl
later call libssh2 to cleanup using the stale pointer.
Fixes#6764Closes#6766
and rename it from 'ftp_list_only' since it is also used for SSH and
POP3. The state is updated internally for 'type=D' FTP URLs.
Added test case 1570 to verify.
Closes#6578
Since the set value then risks getting used like that when the easy
handle is reused by the application.
Also: renamed the struct field from 'ftp_append' to 'remote_append'
since it is also used for SSH protocols.
Closes#6579
Readdir data, filenames and attributes are strictly related to the
transfer and not the connection. This also reduces the total size of the
fixed connectdata struct.
Closes#6519
