- adding tests using very large passwords in auth
- fixes general http sending to treat h3 like h2, and
not like http1.1
- eliminate H2_HEADER max definitions and use the commmon
DYN_HTTP_REQUEST everywhere, different limits do not help
- fix http2 handling of requests denied by nghttp2 on send
to immediately report the refused stream
Closes#11509
- a regression introduced by c9ec851211
where optimization of small POST bodies leads to a new code path
for such uploads that did not trigger the "done sending" event
- add triggering this event for early "upload_done" situations
Fixes#11485Closes#11487
Reported-by: Aleksander Mazur
Previously it would count the size of the entire outgoing request and
not just the size of only the Cookie: header field - which was the
intention.
This could make the check be off by several hundred bytes in some cases.
Closes#11331
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
- with `--proxy-http2` allow h2 ALPN negotiation to
forward proxies
- applies to http: requests against a https: proxy only,
as https: requests will auto-tunnel
- adding a HTTP/1 request parser in http1.c
- removed h2h3.c
- using new request parser in nghttp2 and all h3 backends
- adding test 2603 for request parser
- adding h2 proxy test cases to test_10_*
scorecard.py: request scoring accidentally always run curl
with '-v'. Removed that, expect double numbers.
labeller: added http1.* and h2-proxy sources to detection
Closes#10967
- use bufq for send/receive of network data
- usd bufq for send/receive of stream data
- use HTTP/2 flow control with no-auto updates to control the
amount of data we are buffering for a stream
HTTP/2 stream window set to 128K after local tests, defined
code constant for now
- elminiating PAUSEing nghttp2 processing when receiving data
since a stream can now take in all DATA nghttp2 forwards
Improved scorecard and adjuste http2 stream window sizes
- scorecard improved output formatting and options default
- scorecard now also benchmarks small requests / second
Closes#10771
Adding `bufq`:
- at init() time configured to hold up to `n` chunks of `m` bytes each.
- various methods for reading from and writing to it.
- `peek` support to get access to buffered data without copy
- `pass` support to allow buffer flushing on write if it becomes full
- use case: IO buffers for dynamic reads and writes that do not blow up
- distinct from `dynbuf` in that:
- it maintains a read position
- writes on a full bufq return CURLE_AGAIN instead of nuking itself
- Init options:
- SOFT_LIMIT: allow writes into a full bufq
- NO_SPARES: free empty chunks right away
- a `bufc_pool` that can keep a number of spare chunks to
be shared between different `bufq` instances
Adding `dynhds`:
- a straightforward list of name+value pairs as used for HTTP headers
- headers can be appended dynamically
- headers can be removed again
- headers can be replaced
- headers can be looked up
- http/1.1 formatting into a `dynbuf`
- configured at init() with limits on header counts and total string
sizes
- use case: pass a HTTP request or response around without being version
specific
- express a HTTP request without a curl easy handle (used in h2 proxy
tunnels)
- future extension possibilities:
- conversions of `dynhds` to nghttp2/nghttp3 name+value arrays
Closes#10720
This is already how curl is documented to behave in Everything curl, but
in actuality only short POSTs skip this. This should knock 30 seconds
off a full run of the test suite since the 100-continue timeout will no
longer be hit.
Closes#10740
- when h2/h3 eyeballing was involved, unix domain socket
configurations were not honoured
- configuring --unix-socket will disable HTTP/3 as candidate for eyeballing
- combinatino of --unix-socket and --http3-only will fail during initialisation
- adding pytest test_11 to reproduce
Reported-by: Jelle van der Waa
Fixes#10633Closes#10641
As tested in test_02_07, when firing off 200 urls with --parallel, 199
wait for the first connection to be established. if that is multiuse,
urls are added up to its capacity.
The first url over capacity opens another connection. But subsequent
urls found the same situation and open a connection too. They should
have waited for the second connection to actually connect and make its
capacity known.
This change fixes that by
- setting `connkeep()` early in the HTTP setup handler. as otherwise
a new connection is marked as closeit by default and not considered
for multiuse at all
- checking the "connected" status for a candidate always and continuing
to PIPEWAIT if no alternative is found.
pytest:
- removed "skip" from test_02_07
- added test_02_07b to check that http/1.1 continues to work as before
Closes#10456
[CWE-570] V560: A part of conditional expression is always false: conn->bits.authneg.
[CWE-570] V560: A part of conditional expression is always false: conn->handler->protocol & (0 | 0).
https://pvs-studio.com/en/docs/warnings/v560/Closes#10399
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
The message "Mark bundle as not supporting multiuse" was added at commit
29364d93 when an http/2-related bug was fixed, and it appears to be a
leftover trace message.
This message should be removed because:
* it conveys no information to the user
* it is enabled in the default build (--enable-verbose)
* it reads like a warning/unexpected condition
* it is equivalent to "Detected http proto < 2", which is
not a useful message.
* it is a time-wasting red-herring for anyone who encounters
it for the first time while investigating some other, real
problem.
This commit removes the trace message "Mark bundle as not
supporting multiuse"
Closes#10159
When checking if there is a "secure context", which it is if the
connection is to localhost even if the protocol is HTTP, the comparison
for ::1 was done incorrectly and included brackets.
Reported-by: BratSinot on github
Fixes#10120Closes#10121
Otherwise it stores the info HSTS into the persistent cache for the IDN
name which will not match when the HSTS status is later checked for
using the decoded name.
Reported-by: Hiroki Kurosawa
Closes#10111
Deprecation and removal of codeset conversion support from the library
have released the strict need for an early binding of mime structures to
an easy handle (https://github.com/curl/curl/commit/2610142).
This constraint currently forces to create the handle before the mime
structure and the latter cannot be attached to another handle once
created (see https://curl.se/mail/lib-2022-08/0027.html).
This commit removes the handle pointers from the mime structures
allowing more flexibility on their use.
When an easy handle is duplicated, bound mime structures must however
still be duplicated too as their components hold send-time dynamic
information.
Closes#9927
- `Curl_ssl_get_config()` now returns the first config if no SSL proxy
filter is active
- socket filter starts connection only on first invocation of its
connect method
Fixes#9982Closes#9983
This makes a big difference for cases when the rewind is not actually
necessary to perofm (for example HTTP response code 301 converts to GET)
and therefore the rewind can be avoided. In particular for situations
when that rewind fails, for example when reading from a pipe or similar.
Reported-by: Ali Utku Selen
Fixes#9735Closes#9958
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
Follow-up to dafdb20a26
HTTP/3 needs a special filter chain, since it does the TLS handling
itself. This PR adds special setup handling in the HTTP protocol handler
that takes are of it.
When a handler, in its setup method, installs filters, the default
behaviour for managing the filter chain is overridden.
Reported-by: Karthikdasari0423 on github
Fixes#9931Closes#9945
This struct field MUST remain what the application set it to, so that
handle reuse and handle duplication work.
Instead, the request state bit 'no_body' is introduced for code flows
that need to change this in run-time.
Closes#9888
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
Unlike `CONNECT`, currently we don't keep track whether `PROXY` is
already sent or not. This causes `PROXY` header to be sent twice during
`MSTATE_TUNNELING` and `MSTATE_PROTOCONNECT`.
Closes#9878Fixes#9442
- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing repeated words.
- Replace `a HTTP` with `an HTTP`
Closes#9802
Since the date parser allows YYYYMMDD as a date format (due to it being
a bit too generic for parsing this particular header), a large integer
number could wrongly match that pattern and cause the parser to generate
a wrong value.
No date format accepted for this header starts with a decimal number, so
by reversing the check and trying a number first we can deduct that if
that works, it was not a date.
Reported-by Trail of Bits
Closes#9718
This function is currently located in the lib/http.c module and is
therefore disabled by the CURL_DISABLE_HTTP conditional token.
As it may be called by TLS backends, disabling HTTP results in an
undefined reference error at link time.
Move this function to vauth/vauth.c to always provide it and rename it
as Curl_auth_allowed_to_host() to respect the vauth module naming
convention.
Closes#9600
Next Protocol Negotiation is a TLS extension that was created and used
for agreeing to use the SPDY protocol (the precursor to HTTP/2) for
HTTPS. In the early days of HTTP/2, before the spec was finalized and
shipped, the protocol could be enabled using this extension with some
servers.
curl supports the NPN extension with some TLS backends since then, with
a command line option `--npn` and in libcurl with
`CURLOPT_SSL_ENABLE_NPN`.
HTTP/2 proper is made to use the ALPN (Application-Layer Protocol
Negotiation) extension and the NPN extension has no purposes
anymore. The HTTP/2 spec was published in May 2015.
Today, use of NPN in the wild should be extremely rare and most likely
totally extinct. Chrome removed NPN support in Chrome 51, shipped in
June 2016. Removed in Firefox 53, April 2017.
Closes#9307
