When the legacy CURLOPT_HTTPPOST option is used, it gets converted into
the modem mimpost struct at first use. This data is (now) kept for the
entire transfer and not only per single HTTP request. This re-enables
rewind in the beginning of the second request instead of in end of the
first, as brought by 1b39731.
The request struct is per-request data only.
Extend test 650 to verify.
Fixes#11680
Reported-by: yushicheng7788 on github
Closes#11682
HTTP/1 connections that are upgraded to HTTP/2 should not be picked up
for reuse and multiplexing by other handles until the 101 switching
process is completed.
Lots-of-debgging-by: Stefan Eissing
Reported-by: Richard W.M. Jones
Bug: https://curl.se/mail/lib-2023-07/0045.htmlCloses#11557
- Use CURL_FORMAT_CURL_OFF_T where %zd was erroneously used for some
curl_off_t variables.
- Use %zu where %zd was erroneously used for some size_t variables.
Prior to this change some of the Windows CI tests were failing because
in Windows 32-bit targets have a 32-bit size_t and a 64-bit curl_off_t.
When %zd was used for some curl_off_t variables then only the lower
32-bits was read and the upper 32-bits would be read for part or all of
the next specifier.
Fixes https://github.com/curl/curl/issues/11327
Closes https://github.com/curl/curl/pull/11321
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
If the previous line starts with if/while/for AND ends with a closed
parenthesis and there's an equal number of open and closed parentheses
on that line, verify that this line is indented $indent more steps, if
not a cpp line.
Also adjust the fall-out from this fix.
Closes#11054
The multi-ignore logic that was previously applied to
curl_multi_perform() (#10750) is here applied to the loop within
curl_multi_socket_action() to make it use the same optimization: most
handles have the same signal-ignore option state so this drastically
reduces the number of ignore/unignore calls per libcurl function invoke.
Follow-up to bc90308328Closes#11045
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
'data->multi' is kept a pointer to the multi handle as long as the easy
handle is actually part of it even when the handle is moved to the
pending/msgsent lists. It needs to know which multi handle it belongs
to, if for example curl_easy_cleanup() is called before the handle is
removed from the multi handle.
Alll 'data->multi' pointers of handles still part of the multi handle
gets cleared by curl_multi_cleanup() which "orphans" all previously
attached easy handles.
This is take 2. The first version was reverted for the 8.0.1 release.
Assisted-by: Stefan Eissing
Closes#10801
For GOOD_EASY_HANDLE and GOOD_MULTI_HANDLE checks
- allow NULL pointers to "just" return an error as before
- fail hard on nun-NULL pointers that no longer show the MAGICs
Closes#10812
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
Assisted-by: Stefan Eissing
Ref: #10743Closes#10762
Linked lists themselves do not carry any allocations, so for the lists
that do not have have a set destructor we can just skip the
Curl_llist_destroy() call and save CPU time.
Closes#10764
The feature is rarely used so this frees up data for the vast majority
of easy handles that don't use it.
Rename "protdata" to "ftpwc" since it is always an FTP wildcard struct
pointer. Made the state struct field an unsigned char to save space.
Closes#10639
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
This makes a big difference for cases when the rewind is not actually
necessary to perofm (for example HTTP response code 301 converts to GET)
and therefore the rewind can be avoided. In particular for situations
when that rewind fails, for example when reading from a pipe or similar.
Reported-by: Ali Utku Selen
Fixes#9735Closes#9958
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
The check may take many milliseconds, so now it is performed once the
value is first needed. Also, this change makes sure that the value is
not used if the resolve is set to be IPv4-only.
Closes#9553
Have curl_multi_init() use a much larger DNS hash table than used for
the easy interface to scale and perform better when used with _many_
host names.
curl_share_init() sets an in-between size.
Inspired-by: Ivan Tsybulin
See #9340Closes#9376
First check for errors and return CURLM_UNRECOVERABLE_POLL
before moving forward and waiting on socket readiness events.
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Reported-by: Daniel Stenberg
Ref: #9361
Follow up to #8961Closes#9372
On Windows revents was not populated for extra_fds if
multi_wait had to wait due to the Curl_poll pre-check
not signalling any readiness. This commit fixes that.
Reviewed-by: Marcel Raad
Reviewed-by: Jay Satiro
Closes#9361
Ẃhen it has been used in the multi interface, it is otherwise left in
the connection cache, can't be reused and nothing will close them since
the easy handle loses the association with the multi handle and thus the
connection cache - until the multi handle is closed or it gets pruned
because the cache is full.
Reported-by: Dominik Thalhammer
Fixes#9335Closes#9342
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
Adds two new error codes: CURLE_UNRECOVERABLE_POLL and
CURLM_UNRECOVERABLE_POLL one each for the easy and the multi interfaces.
Reported-by: Harry Sintonen
Fixes#8921Closes#8961
Several years ago a change was made to block user callbacks from calling
back into the API when not supported (recursive calls). One of the calls
blocked was curl_multi_assign. Recently the blocking was extended to the
multi interface API, however curl_multi_assign may need to be called
from within those user callbacks (eg CURLMOPT_SOCKETFUNCTION).
I can't think of any callback where it would be unsafe to call
curl_multi_assign so I removed the restriction entirely.
Reported-by: Michael Wallner
Ref: https://github.com/curl/curl/commit/b46cfbc
Ref: https://github.com/curl/curl/commit/340bb19
Fixes https://github.com/curl/curl/issues/8480
Closes https://github.com/curl/curl/pull/8483
Fix a bug that does not require a new CVE as discussed on hackerone.com.
Previously `connection_id` was accessed after returning connection to
the shared pool.
Bug: https://hackerone.com/reports/1463013Closes#8355
1. The function would only ever return CURLE_OK anyway
2. Only one caller actually used the return code
3. Most callers did (void)Curl_disconnect()
Closes#8303
This makes most libcurl functions return error if called from within a
callback using the same multi handle. For example timer or socket
callbacks calling curl_multi_socket_action.
Reported-by: updatede on github
Fixes#8282Closes#8286
Since each socket hash entry may themselves have a hash table in them,
the destroying of the socket hash needs to make sure all the subhashes
are also correctly destroyed to avoid leaking memory.
Fixes#8129Closes#8131
The callbacks were partially documented to support this. Now the
behavior is documented and returning error from either of these
callbacks will effectively kill all currently ongoing transfers.
Added test 530 to verify
Reported-by: Marcelo Juchem
Fixes#8083Closes#8089
Triggered before a request is made but after a connection is set up
Changes:
- callback: Update docs and callback for pre-request callback
- Add documentation for CURLOPT_PREREQDATA and CURLOPT_PREREQFUNCTION,
- Add redirect test and callback failure test
- Note that the function may be called multiple times on a redirection
- Disable new 2086 test due to Windows weirdness
Closes#7477
The VALID_SOCK() macro was made to only check for FD_SETSIZE if curl was
built to use select(), even though the curl_multi_fdset() function
always and unconditionally uses FD_SET and needs the check.
Reported-by: 0xee on github
Fixes#7718Closes#7719
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
- Check whether a connection has succeded before checking whether it's
timed out.
This means if we've connected quickly, but subsequently been
descheduled, we allow the connection to succeed. Note, if we timeout,
but between checking the timeout, and connecting to the server the
connection succeeds, we will allow it to go ahead. This is viewed as
an acceptable trade off.
- Add additional failf logging around failed connection attempts to
propogate the cause up to the caller.
Co-Authored-by: Martin Howarth
Closes#7178
scan-build-6 otherwise warns, saying: warning: The left operand of '>='
is a garbage value otherwise, which is false.
Later scan-builds don't claim this on the same code.
Closes#7248
The libssh2 backend has SSH session associated with the connection but
the callback context is the easy handle, so when a connection gets
attached to a transfer, the protocol handler now allows for a custom
function to get used to set things up correctly.
Reported-by: Michael O'Farrell
Fixes#6898Closes#7078
Also added 'CURL_SMALLSENDS' to make Curl_write() send short packets,
which helped verifying this even more.
Add test 363 to verify.
Reported-by: ustcqidi on github
Fixes#6950Closes#7024
Reset FD_WRITE by sending zero bytes which is permissible
and will be treated by implementations as successful send.
Without this we won't be notified in case a socket is still
writable if we already received such a notification and did
not send any data afterwards on the socket. This would lead
to waiting forever on a writable socket being writable again.
Assisted-by: Tommy Odom
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Tested-by: tmkk on github
Bug: #6146Closes#6245
1. Consolidate pre-checks into a single Curl_poll call:
This is an attempt to restructure the code in Curl_multi_wait
in such a way that less syscalls are made by removing individual
calls to Curl_socket_check via SOCKET_READABLE/SOCKET_WRITABLE.
2. Avoid resetting the WinSock event multiple times:
We finally call WSAResetEvent anyway, so specifying it as
an optional parameter to WSAEnumNetworkEvents is redundant.
3. Wakeup directly in case no sockets are being monitoring:
Fix the WinSock based implementation to skip extra waiting by
not sleeping in case no sockets are to be waited on and just
the WinSock event is being monitored for wakeup functionality.
Assisted-by: Tommy Odom
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Bug: #6146Closes#6245
This reverts commit 2260e0ebe6,
also restoring previous follow up changes which were reverted.
Authored-by: rcombs on github
Authored-by: Marc Hörsken
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Restores #5634
Reverts #6281
Part of #6245
The ConnectionExists() function will note that the new transfer wants
less then h2 and that it can't multiplex it and therefor opt to open a
new connection instead.
Storing a stream error in the per-connection struct was an error that lead to
race conditions as subsequent stream handling could overwrite the error code
before it was used for the stream with the actual problem.
Closes#6910
Both were used for the same purposes and there was no logical separation
between them. Combined, this also saves 16 bytes in less holes in my
test build.
Closes#6798
Otherwise libcurl is likely to reuse the connection again in the next
attempt since the connection reuse logic doesn't take downgrades into
account.
Reported-by: Anthony Ramine
Fixes#6788Closes#6793
... since the state machine might go to RATELIMITING and then back to
PERFORMING doing once-per-transfer inits in that function is wrong and
it caused problems with receiving chunked HTTP and it set the
PRETRANSFER time much too often...
Regression from b68dc34af3 (shipped in 7.75.0)
Reported-by: Amaury Denoyelle
Fixes#6640Closes#6641
While working on documenting the states it dawned on me that step one is
to use more descriptive names on the states. This also changes prefix on
the states to make them shorter in the source.
State names NOT ending with *ing are transitional ones.
Closes#6612
The Curl_easy pointer struct entry in connectdata is now gone. Just
before commit 215db086e0 landed on January 8, 2021 there were 919
references to conn->data.
Closes#6608
Rename it to 'httpwant' and make a cloned field in the state struct as
well for run-time updates.
Also: refuse non-supported HTTP versions. Verified with test 129.
Closes#6585
- Reorder some internal struct members so that less padding is used.
This is an attempt at saving a bit of space by packing some structs
(using pahole to find the holes) where it might make sense to do
so without losing readability.
I.e., I tried to avoid separating fields that seem grouped
together (like the cwd... fields in struct ftp_conn for instance).
Also abstained from touching fields behind conditional macros as
that quickly can get complicated.
Closes https://github.com/curl/curl/pull/6483
By making the `magic` identifier the same size and at the same place
within the structs (easy, multi, share), libcurl will be able to more
reliably detect and safely error out if an application passes in the
wrong handle to APIs. Easier to detect and less likely to cause crashes
if done.
Such mixups can't be detected at compile-time due to them being
typedefed void pointers - unless `CURL_STRICTER` is defined.
Closes#6484
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
... instead of at end of the DO state. This makes the timer more
accurate for the protocols that use the DOING state (such as FTP), and
simplifies how the function (now called init_perform) is called.
The timer will then include the entire procedure up to PERFORM -
including all instructions for getting the transfer started.
Closes#6454
When doing HTTP authentication and a port number set with CURLOPT_PORT,
the code would previously have the URL's port number override as if it
had been a redirect to an absolute URL.
Added test 1568 to verify.
Reported-by: UrsusArctos on github
Fixes#6397Closes#6400
When failing in TOOFAST, the multi_done() wasn't called so the same
cleanup and handling wasn't done like when it fails in PERFORM, which in
the case of FTP could mean that the control connection wouldn't be
marked as "dead" for the CURLE_ABORTED_BY_CALLBACK case. Which caused
ftp_disconnect() to use it to send "QUIT", which could end up waiting
for a response a long time before giving up!
Reported-by: Tomas Berger
Fixes#6333Closes#6337
This reverts commit d2a7d7c185.
This commit also reverts the subsequent follow-ups to that commit, which
were all done within windows #ifdefs that are removed in this
change. Marc helped me verify this.
Fixes#6146Closes#6281
