- leave transfer loop when --limit-rate is in effect and has
been received
- adjust stream window size to --limit-rate plus some slack
to make the server observe the pacing we want
- add test case to confirm behaviour
Closes#11115
- doing a POST with `--digest` does an override on the initial request
with `Content-Length: 0`, but the http2 filter was unaware of that
and expected the originally request body. It did therefore not
send a final DATA frame with EOF flag to the server.
- The fix overrides any initial notion of post size when the `done_send`
event is triggered by the transfer loop, leading to the EOF that
is necessary.
- refs #11194. The fault did not happen in testing, as Apache httpd
never tries to read the request body of the initial request,
sends the 401 reply and closes the stream. The server used in the
reported issue however tried to read the EOF and timed out on the
request.
Reported-by: Aleksander Mazur
Fixes#11194
Cloes #11200
- refs #11157 and #11175 where uploads get stuck or lead to RST streams
- fixes our h2 send behaviour to continue sending in the nghttp2 session
as long as it wants to. This will empty our send buffer as long as
the remote stream/connection window allows.
- in case the window is exhausted, the data remaining in the send buffer
will wait for a WINDOW_UPDATE from the server. Which is a socket event
that engages our transfer loop again
- the problem in the issue was that we did not exhaust the window, but
left data in the sendbuffer and no further socket events did happen.
The server was just waiting for us to send more.
- relatedly, there was an issue fixed that closing a stream with KEEP_HOLD
set kept the transfer from shutting down - as it should have - leading
to a timeout.
Closes#11176
Make send buffer smaller to have progress and "upload done" reporting
closer to reality. Fix handling of send "drain" condition to no longer
trigger once the transfer loop reports it is done sending. Also do not
trigger the send "drain" on RST streams.
Background:
- a upload stall was reported in #11157 that timed out
- test_07_33a reproduces a problem with such a stall if the
server 404s the request and RSTs the stream.
- test_07_33b verifies a successful PUT, using the parameters
from #11157 and checks success
Ref: #11157Closes#11165
This works around #11138, by doubling the limit, and should be a
relatively safe fix.
Ideally the buffer would grow as needed and there would be no need for a
limit? But that might be follow-up material.
Fixes#11138Closes#11139
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
- nghttp2 does not free connection level window flow for
aborted streams
- when closing transfers, make sure that any buffered
response data is "given back" to the flow control window
- add tests test_02_22 and test_02_23 to reproduce
Closes#11052
- fixes stalled connections
- Make the connection window large enough, so that there is
some room left should 99/100 streams be PAUSED by the application
Reported-by: Paweł Wegner
Fixes#10988Closes#11043
- Makefile support for building test specific clients in tests/http/clients
- auto-make of clients when invoking pytest
- added test_09_02 for server PUSH_PROMISEs using clients/h2-serverpush
- added test_02_21 for lib based downloads and pausing/unpausing transfers
curl url parser:
- added internal method `curl_url_set_authority()` for setting the
authority part of a url (used for PUSH_PROMISE)
http2:
- made logging of PUSH_PROMISE handling nicer
Placing python test requirements in requirements.txt files
- separate files to base test suite and http tests since use
and module lists differ
- using the files in the gh workflows
websocket test cases, fixes for we and bufq
- bufq: account for spare chunks in space calculation
- bufq: reset chunks that are skipped empty
- ws: correctly encode frames with 126 bytes payload
- ws: update frame meta information on first call of collect
callback that fills user buffer
- test client ws-data: some test/reporting improvements
Closes#11006
- just increasing the http/2 flow window does not necessarily
make a server send new data. It may already have exhausted
the window before
Closes#11005
- `drain` was used by http/2 and http/3 implementations to indicate
that the transfer requires send/recv independant from its socket
poll state. Intended as a counter, it was used as bool flag only.
- a similar mechanism exists on `connectdata->cselect_bits` where
specific protocols can indicate something similar, only for the
whole connection.
- `cselect_bits` are cleard in transfer.c on use and, importantly,
also set when the transfer loop expended its `maxloops` tries.
`drain` was not cleared by transfer and the http2/3 implementations
had to take care of that.
- `dselect_bits` is cleared *and* set by the transfer loop. http2/3
does no longer clear it, only set when new events happen.
This change unifies the handling of socket poll overrides, extending
`cselect_bits` by a easy handle specific value and a common treatment in
transfers.
Closes#11005
- with `--proxy-http2` allow h2 ALPN negotiation to
forward proxies
- applies to http: requests against a https: proxy only,
as https: requests will auto-tunnel
- adding a HTTP/1 request parser in http1.c
- removed h2h3.c
- using new request parser in nghttp2 and all h3 backends
- adding test 2603 for request parser
- adding h2 proxy test cases to test_10_*
scorecard.py: request scoring accidentally always run curl
with '-v'. Removed that, expect double numbers.
labeller: added http1.* and h2-proxy sources to detection
Closes#10967
- move all code handling HTTP/2 frames for a particular
stream into a separate function to keep from confusing
the call `data` with the stream `data`.
Closes#10924
- remove NGHTTP2 members of `struct HTTP`
- add `void *h2_ctx` to `struct HTTP`
- add `void *h3_ctx` to `struct HTTP`
- separate h2/h3 pointers are needed for eyeballing
- manage local stream_ctx in http implementations
Closes#10877
- eliminate receive loop in vtls to fill buffer. This may
lead to partial reads of data which is counter productive
- let http2 instead loop smarter to process pending network
data without transfer switches
scorecard improvements
- do not start caddy when only httpd is requested
- allow curl -v to stderr file on --curl-verbose
Closes#10891
- use bufq for send/receive of network data
- usd bufq for send/receive of stream data
- use HTTP/2 flow control with no-auto updates to control the
amount of data we are buffering for a stream
HTTP/2 stream window set to 128K after local tests, defined
code constant for now
- elminiating PAUSEing nghttp2 processing when receiving data
since a stream can now take in all DATA nghttp2 forwards
Improved scorecard and adjuste http2 stream window sizes
- scorecard improved output formatting and options default
- scorecard now also benchmarks small requests / second
Closes#10771
- use the defined, but so far not used, KEEP_SEND_HOLD bit for flow
control based suspend of sending in transfers.
Prior to this change KEEP_SEND_PAUSE bit was used instead, but that can
interfere with pausing streams from the user side via curl_easy_pause.
Fixes https://github.com/curl/curl/issues/10751
Closes https://github.com/curl/curl/pull/10753
RST and connection close were not handled correctly during parallel
transfers, leading to aborted response bodies being reported complete.
Closes#10715
- add parameter to `conn_is_alive()` cfilter method that returns
if there is input data waiting on the connection
- refrain from re-using connnection from the cache that have
input pending
- adapt http/2 and http/3 alive checks to digest pending input
to check the connection state
- remove check_cxn method from openssl as that was just doing
what the socket filter now does.
- add tests for connection reuse with special server configs
Closes#10690
- a reset transfer (HTTP/2 RST) did not always lead to the proper
error message on receiving its response, leading to wrong reports
of a successful transfer
- test_05_02 was able to trigger this condition with increased transfer
count. The simulated response errors did not carry a 'Content-Length'
so only proper RST handling could detect the abort
- When doing such transfers in parallel, a connection could enter the
state where
a) it had been closed (GOAWAY received)
b) the RST had not been "seen" for the transfer yet
or c) the GOAWAY announced an error and the last successful
stream id was not checked against ongoing transfers
Closes#10693
- refs #10634 where errors in the HTTP/2 framing layer are observed.
- the bug was that on connection reuse, the code attempted to switch
in yet another layer of HTTP/2 handling instead of detecting that
this was already in place.
- added pytest testcase reproducing the issue.
Reported-by: rwmjones on github
Fixes#10634Closes#10643
* do not process pending input data when copying pausedata to the
caller
* return CURLE_AGAIN if the output buffer could not be completely
written out.
Ref: #10525Closes#10529
- as reported in #10433, HTTP/2 uploads may stall when a response is
received before the upload is done. This happens when the
data->state.drain is set for such a transfer, as the special handling
in transfer.c from then on only cared about downloads.
- add continuation of uploads, if applicable, in this case.
- add pytest case test_07_12_upload_seq_large to reproduce this scenario
(although, current nghttp2 implementation is using drain less often)
Reported-by: Lucas Pardue
Fixes#10433Closes#10443
add a small buffer to nghttp2 session sending in order to aggregate
small SETTINGS/PRIO/WIN_UPDATE frames that nghttp2 "writes" to the
callback individually.
Ref: #10389Closes#10432
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- Curl_write_plain/Curl_read_plain have been eliminated. Last code use
now uses Curl_conn_send/recv so that requests use conn->send/revc
callbacks which defaults to cfilters use.
- Curl_recv_plain/Curl_send_plain have been internalized in cf-socket.c.
- USE_RECV_BEFORE_SEND_WORKAROUND (active on Windows) has been moved
into cf-socket.c. The pre_recv buffer is held at the socket filter
context. `postponed_data` structures have been removed from
`connectdata`.
- the hanger in HTTP/2 request handling was a result of read buffering
on all sends and the multi handling is not prepared for this. The
following happens:
- multi preforms on a HTTP/2 easy handle
- h2 reads and processes data
- this leads to a send of h2 data
- which receives and buffers before the send
- h2 returns
- multi selects on the socket, but no data arrives (its in the buffer already)
the workaround now receives data in a loop as long as there is something in
the buffer. The real fix would be for multi to change, so that `data_pending`
is evaluated before deciding to wait on the socket.
io_buffer, optional, in cf-socket.c, http/2 sets state.drain if lower
filter have pending data.
This io_buffer is only available/used when the
-DUSE_RECV_BEFORE_SEND_WORKAROUND is active, e.g. on Windows
configurations. It also maintains the original checks on protocol
handler being HTTP and conn->send/recv not being replaced.
The HTTP/2 (nghttp2) cfilter now sets data->state.drain when it finds
out that the "lower" filter chain has still pending data at the end of
its IO operation. This prevents the processing from becoming stalled.
Closes#10280
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
- adding '--with-test-httpd=<path>' to configure non-standard apache2
install
- python env and base classes for running httpd
- basic tests for connectivity with h1/h2/h3
- adding test cases for truncated responses in http versions.
- adding goaway test for HTTP/3.
- adding "stuttering" tests with parallel downloads in chunks with
varying delays between chunks.
- adding a curltest module to the httpd server, adding GOAWAY test.
- mod_curltest now installs 2 handlers
- 'echo': writing as response body what came as request body
- 'tweak': with query parameters to tweak response behaviour
- marked known fails as skip for now
Closes#10175
Prior to this change http2_cfilter_add could return an uninitialized
cfilter pointer in an OOM condition. In this case though, the pointer
is discarded and not dereferenced so there was no risk of a crash.
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Otherwise data->conn is NULL and things go wrong.
This problem caused occastional failures in test 359, 1700 and more
depending on timing and the alignment of various planets.
Assisted-by: Stefan Eissing
Closes#10199
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
No point in having two entry points for the same functions.
Also merged the *safe* function treatment into these so that they can
also be used when one or both pointers are NULL.
Closes#9837
- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing repeated words.
- Replace `a HTTP` with `an HTTP`
Closes#9802
In nghttp2 1.49.0 it returns error on leading and trailing whitespace in
header fields according to language in the recently shipped RFC 9113.
nghttp2 1.50.0 introduces an option to switch off this strict check and
this change enables this option by default which should make curl behave
more similar to how it did with nghttp2 1.48.0 and earlier.
We might want to consider making this an option in the future.
Closes#9448
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
For the "simulated 304" case the done-call isn't considered "premature"
but since the server didn't close the stream it needs to be reset to
stop delivering data.
Closes#8664
The only h2 psuedo header that wasn't previously possible to change by a
user. This change also makes it impossible to send a HTTP/1 header that
starts with a colon, which I don't think anyone does anyway.
The other pseudo headers are possible to change indirectly by doing the
rightly crafted request.
Reported-by: siddharthchhabrap on github
Fixes#8381Closes#8393
If curl_url() returns NULL this should return early to avoid mistakes -
even if right now the subsequent function invokes are all OK.
Coverity (wrongly) pointed out this as a NULL deref.
Closes#8100
While uploading, check for remote window availability in the getsock
function so that we don't wait for a writable socket if no data can be
sent.
Reported-by: Steini2000 on github
Fixes#7821Closes#7839
Regression from 3cb8a74867 (releasde in 7.79.0). That change moved
transfer oriented inits to before the check but also erroneously moved a
few connection oriented ones, which causes problems.
Reported-by: Evangelos Foutras
Fixes#7730Closes#7731
Thus function was written to avoid doing multiple connection data
initializations, which is fine, but since it also initiates stream
related data it is crucial that it doesn't skip those even if called
again for the same connection. Solved by moving the stream
initializations before the "doing-it-again" check.
Reported-by: Inho Oh
Fixes#7630Closes#7692
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
The libssh2 backend has SSH session associated with the connection but
the callback context is the easy handle, so when a connection gets
attached to a transfer, the protocol handler now allows for a custom
function to get used to set things up correctly.
Reported-by: Michael O'Farrell
Fixes#6898Closes#7078
Since the function is called for any protocol, we can't assume that the
HTTP struct is there without first making sure it is HTTP.
Reported-by: Denis Goleshchikhin
Fixes#7079Closes#7080
This is considered not harmful as a following http2_recv shall be
called very soon.
This is considered helpful in the specific situation where some
servers (e.g. nghttpx v1.43.0) may fulfill stream 1 immediately
following the return of HTTP status 101, other than waiting for
the client-side connection preface to arrive.
Fixes#7036Closes#7040
... detected by Coverity:
Error: RESOURCE_LEAK (CWE-772):
lib/http2.c:532: alloc_fn: Storage is returned from allocation function "duphandle".
lib/http2.c:532: var_assign: Assigning: "newhandle" = storage returned from "duphandle(data)".
lib/http2.c:552: noescape: Resource "newhandle" is not freed or pointed-to in "set_transfer_url".
lib/http2.c:555: leaked_storage: Variable "newhandle" going out of scope leaks the storage it points to.
Closes#6986
... detected by Coverity:
Error: RESOURCE_LEAK (CWE-772):
lib/http2.c:480: alloc_fn: Storage is returned from allocation function "curl_url". [Note: The source code implementation of the function has been overridden by a builtin model.]
lib/http2.c:480: var_assign: Assigning: "u" = storage returned from "curl_url()".
lib/http2.c:486: noescape: Resource "u" is not freed or pointed-to in "curl_url_set". [Note: The source code implementation of the function has been overridden by a builtin model.]
lib/http2.c:488: leaked_storage: Variable "u" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK (CWE-772):
lib/http2.c:480: alloc_fn: Storage is returned from allocation function "curl_url". [Note: The source code implementation of the function has been overridden by a builtin model.]
lib/http2.c:480: var_assign: Assigning: "u" = storage returned from "curl_url()".
lib/http2.c:493: noescape: Resource "u" is not freed or pointed-to in "curl_url_set". [Note: The source code implementation of the function has been overridden by a builtin model.]
lib/http2.c:495: leaked_storage: Variable "u" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK (CWE-772):
lib/http2.c:480: alloc_fn: Storage is returned from allocation function "curl_url". [Note: The source code implementation of the function has been overridden by a builtin model.]
lib/http2.c:480: var_assign: Assigning: "u" = storage returned from "curl_url()".
lib/http2.c:500: noescape: Resource "u" is not freed or pointed-to in "curl_url_set". [Note: The source code implementation of the function has been overridden by a builtin model.]
lib/http2.c:502: leaked_storage: Variable "u" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK (CWE-772):
lib/http2.c:480: alloc_fn: Storage is returned from allocation function "curl_url". [Note: The source code implementation of the function has been overridden by a builtin model.]
lib/http2.c:480: var_assign: Assigning: "u" = storage returned from "curl_url()".
lib/http2.c:505: noescape: Resource "u" is not freed or pointed-to in "curl_url_get". [Note: The source code implementation of the function has been overridden by a builtin model.]
lib/http2.c:507: leaked_storage: Variable "u" going out of scope leaks the storage it points to.
Closes#6986
Storing a stream error in the per-connection struct was an error that lead to
race conditions as subsequent stream handling could overwrite the error code
before it was used for the stream with the actual problem.
Closes#6910
This was this one condition where the stream could be closed due to an
error and the function would still wrongly just return 0 for it.
Reported-by: Gergely Nagy
Fixes#6862Closes#6910
Both were used for the same purposes and there was no logical separation
between them. Combined, this also saves 16 bytes in less holes in my
test build.
Closes#6798
... but instead use a private alternative that points to the "driving
transfer" from the connection. We set the "user data" associated with
the connection to be the connectdata struct, but when we drive transfers
the code still needs to know the pointer to the transfer. We can change
the user data to become the Curl_easy handle, but with older nghttp2
version we cannot dynamically update that pointer properly when
different transfers are used over the same connection.
Closes#6520
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
... as the socket might be readable all the time when paused and thus
causing a busy-loop.
Reported-by: Harry Sintonen
Reviewed-by: Jay Satiro
Fixes#6356Closes#6357
