- use CLIENTWRITE_BODY *only* when data is actually body data
- add CLIENTWRITE_INFO for meta data that is *not* a HEADER
- debug assertions that BODY/INFO/HEADER is not used mixed
- move `data->set.include_header` check into Curl_client_write
so protocol handlers no longer have to care
- add special in FTP for `data->set.include_header` for historic,
backward compatible reasons
- move unpausing of client writes from easy.c to sendf.c, so that
code is in one place and can forward flags correctly
Closes#11885
Not the counter that accumulates all headers over all redirects.
Follow-up to 3ee79c1674
Do a second check for 20 times the limit for the accumulated size for
all headers.
Fixes#11871
Reported-by: Joshix-1 on github
Closes#11872
When the legacy CURLOPT_HTTPPOST option is used, it gets converted into
the modem mimpost struct at first use. This data is (now) kept for the
entire transfer and not only per single HTTP request. This re-enables
rewind in the beginning of the second request instead of in end of the
first, as brought by 1b39731.
The request struct is per-request data only.
Extend test 650 to verify.
Fixes#11680
Reported-by: yushicheng7788 on github
Closes#11682
To avoid abuse. The limit is set to 300 KB for the accumulated size of
all received HTTP headers for a single response. Incomplete research
suggests that Chrome uses a 256-300 KB limit, while Firefox allows up to
1MB.
Closes#11582
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
- state is fully kept at connection, since curl_ws_send() and
curl_ws_rec() have lifetime beyond usual transfers
- no more limit on frame sizes
Reported-by: simplerobot on github
Fixes#10962Closes#10999
Prior to this change STRING_AWS_SIGV4 (CURLOPT_AWS_SIGV4) was wrongly
marked as binary data that could not be duplicated.
Without this fix, this option's value is not copied upon calling
curl_easy_duphandle().
Closes https://github.com/curl/curl/pull/11021
- `drain` was used by http/2 and http/3 implementations to indicate
that the transfer requires send/recv independant from its socket
poll state. Intended as a counter, it was used as bool flag only.
- a similar mechanism exists on `connectdata->cselect_bits` where
specific protocols can indicate something similar, only for the
whole connection.
- `cselect_bits` are cleard in transfer.c on use and, importantly,
also set when the transfer loop expended its `maxloops` tries.
`drain` was not cleared by transfer and the http2/3 implementations
had to take care of that.
- `dselect_bits` is cleared *and* set by the transfer loop. http2/3
does no longer clear it, only set when new events happen.
This change unifies the handling of socket poll overrides, extending
`cselect_bits` by a easy handle specific value and a common treatment in
transfers.
Closes#11005
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
Some IP cameras send malformed RTSP interleaved frames sometimes, which
can cause curl_easy_perform return 1 (CURLE_UNSUPPORTED_PROTOCOL). This
change attempts to skip clearly incorrect RTSP interleaving frame data.
Closes#10808
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
'data->multi' is kept a pointer to the multi handle as long as the easy
handle is actually part of it even when the handle is moved to the
pending/msgsent lists. It needs to know which multi handle it belongs
to, if for example curl_easy_cleanup() is called before the handle is
removed from the multi handle.
Alll 'data->multi' pointers of handles still part of the multi handle
gets cleared by curl_multi_cleanup() which "orphans" all previously
attached easy handles.
This is take 2. The first version was reverted for the 8.0.1 release.
Assisted-by: Stefan Eissing
Closes#10801
For GOOD_EASY_HANDLE and GOOD_MULTI_HANDLE checks
- allow NULL pointers to "just" return an error as before
- fail hard on nun-NULL pointers that no longer show the MAGICs
Closes#10812
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
Assisted-by: Stefan Eissing
Ref: #10743Closes#10762
By letting curl_easy_header() and curl_easy_nextheader() store the
header data in their own struct storage when they return a pointer to
it, it makes it possible for applications to use them both in a loop.
Like the curl tool does.
Reported-by: Boris Okunskiy
Fixes#10704Closes#10707
The feature is rarely used so this frees up data for the vast majority
of easy handles that don't use it.
Rename "protdata" to "ftpwc" since it is always an FTP wildcard struct
pointer. Made the state struct field an unsigned char to save space.
Closes#10639
- Change readwrite_upload() to call win_update_buffer_size() no more
than once a second to update SO_SNDBUF (send buffer limit).
Prior to this change during an upload readwrite_upload() could call
win_update_buffer_size() anywhere from hundreds of times per second to
an extreme test case of 100k per second (which is likely due to a bug,
see #10618). In the latter case WPA profiler showed
win_update_buffer_size was the highest capture count in
readwrite_upload. In any case the calls were excessive and unnecessary.
Ref: https://github.com/curl/curl/pull/2762
Closes https://github.com/curl/curl/pull/10611
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- add test2600 as a unit test that triggers various connect conditions
and monitors behaviour, available in a debug build only.
- this exposed edge cases in connect.c that have been fixed
Closes#10312
- Curl_write_plain/Curl_read_plain have been eliminated. Last code use
now uses Curl_conn_send/recv so that requests use conn->send/revc
callbacks which defaults to cfilters use.
- Curl_recv_plain/Curl_send_plain have been internalized in cf-socket.c.
- USE_RECV_BEFORE_SEND_WORKAROUND (active on Windows) has been moved
into cf-socket.c. The pre_recv buffer is held at the socket filter
context. `postponed_data` structures have been removed from
`connectdata`.
- the hanger in HTTP/2 request handling was a result of read buffering
on all sends and the multi handling is not prepared for this. The
following happens:
- multi preforms on a HTTP/2 easy handle
- h2 reads and processes data
- this leads to a send of h2 data
- which receives and buffers before the send
- h2 returns
- multi selects on the socket, but no data arrives (its in the buffer already)
the workaround now receives data in a loop as long as there is something in
the buffer. The real fix would be for multi to change, so that `data_pending`
is evaluated before deciding to wait on the socket.
io_buffer, optional, in cf-socket.c, http/2 sets state.drain if lower
filter have pending data.
This io_buffer is only available/used when the
-DUSE_RECV_BEFORE_SEND_WORKAROUND is active, e.g. on Windows
configurations. It also maintains the original checks on protocol
handler being HTTP and conn->send/recv not being replaced.
The HTTP/2 (nghttp2) cfilter now sets data->state.drain when it finds
out that the "lower" filter chain has still pending data at the end of
its IO operation. This prevents the processing from becoming stalled.
Closes#10280
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
- by using BIT() instead of bool
- imap: shrink struct
- ftp: make state 'unsigned char'
- ftp: sort ftp_conn struct entries on size
- urldata: use smaller fields for SSL version info storage
- pop3: reduce the pop3_conn struct size
- smtp: reduce the size of the smtp structs
Closes#10186
- copy `struct Curl_addrinfo` on filter setup into context
- remove `struct Curl_addrinfoi *` with `struct Curl_sockaddr_ex *` in
connectdata that is set and NULLed by the socket filter
- this means we have no reference to the resolver info in connectdata or
its filters
- trigger the CF_CTRL_CONN_INFO_UPDATE event when the complete filter
chain reaches connected status
- update easy handle connection information on CF_CTRL_DATA_SETUP event.
Closes#10213
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
The only TLS auth type libcurl ever supported is SRP and that is the
default type. Since nobody ever sets any other type, there is no point
in wasting space to store the set type and code to check the type.
If TLS auth is used, SRP is now implied.
Closes#10181
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
- source_quote, source_prequote and source_postquote have not been used since
5e0d9aea3; September 2006
- make several fields conditional on proxy support
- make three quote struct fields conditional on FTP || SSH
- make 'mime_options' depend on MIME
- make trailer_* fields depend on HTTP
- change 'gssapi_delegation' from long to unsigned char
- make 'localportrange' unsigned short instead of int
- conn->trailer now depends on HTTP
Closes#10147
The cookiefile entries are set into the handle and should remain set for
the lifetime of the handle so that duplicating it also duplicates the
list. Therefore, the struct field is moved from 'state' to 'set'.
Fixes#10133Closes#10134
This makes a big difference for cases when the rewind is not actually
necessary to perofm (for example HTTP response code 301 converts to GET)
and therefore the rewind can be avoided. In particular for situations
when that rewind fails, for example when reading from a pipe or similar.
Reported-by: Ali Utku Selen
Fixes#9735Closes#9958
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
This struct field MUST remain what the application set it to, so that
handle reuse and handle duplication work.
Instead, the request state bit 'no_body' is introduced for code flows
that need to change this in run-time.
Closes#9888
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
Unlike `CONNECT`, currently we don't keep track whether `PROXY` is
already sent or not. This causes `PROXY` header to be sent twice during
`MSTATE_TUNNELING` and `MSTATE_PROTOCONNECT`.
Closes#9878Fixes#9442
Adds a new option to control the maximum time that a cached
certificate store may be retained for.
Currently only the OpenSSL backend implements support for
caching certificate stores.
Closes#9620
- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing repeated words.
- Replace `a HTTP` with `an HTTP`
Closes#9802
Detecting headers and lib separately makes sense when headers come in
variations or with extra ones, but this wasn't the case here. These were
duplicate/parallel macros that we had to keep in sync with each other
for a working build. This patch leaves a single macro for each of these
dependencies:
- Rely on `HAVE_LIBZ`, delete parallel `HAVE_ZLIB_H`.
Also delete CMake logic making sure these two were in sync, along with
a toggle to turn off that logic, called `CURL_SPECIAL_LIBZ`.
Also delete stray `HAVE_ZLIB` defines.
There is also a `USE_ZLIB` variant in `lib/config-dos.h`. This patch
retains it for compatibility and deprecates it.
- Rely on `USE_LIBSSH2`, delete parallel `HAVE_LIBSSH2_H`.
Also delete `LIBSSH2_WIN32`, `LIBSSH2_LIBRARY` from
`winbuild/MakefileBuild.vc`, these have a role when building libssh2
itself. And `CURL_USE_LIBSSH`, which had no use at all.
Also delete stray `HAVE_LIBSSH2` defines.
- Rely on `USE_LIBSSH`, delete parallel `HAVE_LIBSSH_LIBSSH_H`.
Also delete `LIBSSH_WIN32`, `LIBSSH_LIBRARY` and `HAVE_LIBSSH` from
`winbuild/MakefileBuild.vc`, these were the result of copy-pasting the
libssh2 line, and were not having any use.
- Delete unused `HAVE_LIBPSL_H` and `HAVE_LIBPSL`.
Reviewed-by: Daniel Stenberg
Closes#9652
Move the curl_prot_t to its own conditional block. Introduce symbol
PROTO_TYPE_SMALL to control it.
Fix a cast in a curl_prot_t assignment.
Remove an outdated comment.
Follow-up to cd5ca80.
Closes#9534
This internal-use-only storage type can be bumped to a curl_off_t once
we need to use bit 32 as the previous 'unsigned int' can no longer hold
them all then.
The websocket protocols take bit 30 and 31 so they are the last ones
that fit within 32 bits - but cannot properly be exported through APIs
since those use *signed* 32 bit types (long) in places.
Closes#9481
Next Protocol Negotiation is a TLS extension that was created and used
for agreeing to use the SPDY protocol (the precursor to HTTP/2) for
HTTPS. In the early days of HTTP/2, before the spec was finalized and
shipped, the protocol could be enabled using this extension with some
servers.
curl supports the NPN extension with some TLS backends since then, with
a command line option `--npn` and in libcurl with
`CURLOPT_SSL_ENABLE_NPN`.
HTTP/2 proper is made to use the ALPN (Application-Layer Protocol
Negotiation) extension and the NPN extension has no purposes
anymore. The HTTP/2 spec was published in May 2015.
Today, use of NPN in the wild should be extremely rare and most likely
totally extinct. Chrome removed NPN support in Chrome 51, shipped in
June 2016. Removed in Firefox 53, April 2017.
Closes#9307
By (almost) sorting the struct fields in connectdata in a decending size
order, having the single char ones last, we reduce the number of holes
in the struct and thus the amount of storage needed.
Closes#9280
So that an address used from the DNS cache that was previously used for
QUIC can be reused for TCP and vice versa.
To make this possible, set conn->transport to "unix" for unix domain
connections ... and store the transport struct field in an unsigned char
to use less space.
Reported-by: ウさん
Fixes#9274Closes#9276
and make 'dnstype' in 'struct dnsprobe' use the DNStype to fix the icc compiler warning:
doh.c(924): error #188: enumerated type mixed with another type
Reported-by: Matthew Thompson
Ref #9156Closes#9174
ftp_filemethod, ftpsslauth and ftp_ccc are now uchars
accepttimeout is now unsigned int - almost 50 days ought to be enough
for this value.
Closes#9106
... as replacements for deprecated CURLOPT_PROTOCOLS and
CURLOPT_REDIR_PROTOCOLS as these new ones do not risk running into the
32 bit limit the old ones are facing.
CURLINFO_PROTCOOL is now deprecated.
The curl tool is updated to use the new options.
Added test 1597 to verify the libcurl protocol parser.
Closes#8992
- Send no more than 150 cookies per request
- Cap the max length used for a cookie: header to 8K
- Cap the max number of received Set-Cookie: headers to 50
Bug: https://curl.se/docs/CVE-2022-32205.html
CVE-2022-32205
Reported-by: Harry Sintonen
Closes#9048
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
The callback set by CURLOPT_SSH_HOSTKEYFUNCTION is called to check
wether or not the connection should continue.
The host key is passed in argument with a custom handle for the
application.
It overrides CURLOPT_SSH_KNOWNHOSTS
Closes#7959
Folded header lines will now get passed through like before. The headers
API is adapted and will provide the content unfolded.
Added test 1274 and extended test 1940 to verify.
Reported-by: Petr Pisar
Fixes#8844Closes#8899
These two options were only ever used for the OpenSSL backend for
versions before 1.1.0. They were never used for other backends and they
are not used with recent OpenSSL versions. They were never used much by
applications.
The defines RANDOM_FILE and EGD_SOCKET can still be set at build-time
for ancient EOL OpenSSL versions.
Closes#8670
Also move static function safecmp() as non-static Curl_safecmp() since
its purpose is needed at several places.
Bug: https://curl.se/docs/CVE-2022-22576.html
CVE-2022-22576
Closes#8746
... and make connect_init() refusing trying to tunnel protocols marked
as not working. Avoids a double-free.
Reported-by: Even Rouault
Fixes#8018Closes#8020
Until now, form field and file names where escaped using the
backslash-escaping algorithm defined for multipart mails. This commit
replaces this with the percent-escaping method for URLs.
As this may introduce incompatibilities with server-side applications, a
new libcurl option CURLOPT_MIME_OPTIONS with bitmask
CURLMIMEOPT_FORMESCAPE is introduced to revert to legacy use of
backslash-escaping. This is controlled by new cli tool option
--form-escape.
New tests and documentation are provided for this feature.
Reported by: Ryan Sleevi
Fixes#7789Closes#7805
The code for sending DoH requests with GET was never enabled in a way
such that it could be used or tested. As there haven't been requests
for this feature, and since it at this is effectively dead, remove it
and favor reimplementing the feature in case anyone is interested.
Closes#7870
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Triggered before a request is made but after a connection is set up
Changes:
- callback: Update docs and callback for pre-request callback
- Add documentation for CURLOPT_PREREQDATA and CURLOPT_PREREQFUNCTION,
- Add redirect test and callback failure test
- Note that the function may be called multiple times on a redirection
- Disable new 2086 test due to Windows weirdness
Closes#7477
warning C4189: 'netrc_user_changed': local variable is initialized but
not referenced
warning C4189: 'netrc_passwd_changed': local variable is initialized but
not referenced
Closes#7423
The libssh2 backend has SSH session associated with the connection but
the callback context is the easy handle, so when a connection gets
attached to a transfer, the protocol handler now allows for a custom
function to get used to set things up correctly.
Reported-by: Michael O'Farrell
Fixes#6898Closes#7078
Also added 'CURL_SMALLSENDS' to make Curl_write() send short packets,
which helped verifying this even more.
Add test 363 to verify.
Reported-by: ustcqidi on github
Fixes#6950Closes#7024
Previously this logic would cap the send to CURL_MAX_WRITE_SIZE bytes,
but for the situations where a larger upload buffer has been set, this
function can benefit from sending more bytes. With default size used,
this does the same as before.
Also changed the storage of the size to an 'unsigned int' as it is not
allowed to be set larger than 2M.
Also added cautions to the man pages about changing buffer sizes in
run-time.
Closes#7022
- Disable auto credentials by default. This is a breaking change
for clients that are using it, wittingly or not.
- New libcurl ssl option value CURLSSLOPT_AUTO_CLIENT_CERT tells libcurl
to automatically locate and use a client certificate for
authentication, when requested by the server.
- New curl tool options --ssl-auto-client-cert and
--proxy-ssl-auto-client-cert map to CURLSSLOPT_AUTO_CLIENT_CERT.
This option is only supported for Schannel (the native Windows SSL
library). Prior to this change Schannel would, with no notification to
the client, attempt to locate a client certificate and send it to the
server, when requested by the server. Since the server can request any
certificate that supports client authentication in the OS certificate
store it could be a privacy violation and unexpected.
Fixes https://github.com/curl/curl/issues/2262
Reported-by: Jeroen Ooms
Assisted-by: Wes Hinsley
Assisted-by: Rich FitzJohn
Ref: https://curl.se/mail/lib-2021-02/0066.html
Reported-by: Morten Minde Neergaard
Closes https://github.com/curl/curl/pull/6673
Both were used for the same purposes and there was no logical separation
between them. Combined, this also saves 16 bytes in less holes in my
test build.
Closes#6798
The Curl_easy pointer struct entry in connectdata is now gone. Just
before commit 215db086e0 landed on January 8, 2021 there were 919
references to conn->data.
Closes#6608
- New libcurl options CURLOPT_DOH_SSL_VERIFYHOST,
CURLOPT_DOH_SSL_VERIFYPEER and CURLOPT_DOH_SSL_VERIFYSTATUS do the
same as their respective counterparts.
- New curl tool options --doh-insecure and --doh-cert-status do the same
as their respective counterparts.
Prior to this change DOH SSL certificate verification settings for
verifyhost and verifypeer were supposed to be inherited respectively
from CURLOPT_SSL_VERIFYHOST and CURLOPT_SSL_VERIFYPEER, but due to a bug
were not. As a result DOH verification remained at the default, ie
enabled, and it was not possible to disable. This commit changes
behavior so that the DOH verification settings are independent and not
inherited.
Ref: https://github.com/curl/curl/pull/4579#issuecomment-554723676
Fixes https://github.com/curl/curl/issues/4578
Closes https://github.com/curl/curl/pull/6597
HTTP auth "accidentally" worked before this cleanup since the code would
always overwrite the connection credentials with the credentials from
the most recent transfer and since HTTP auth is typically done first
thing, this has not been an issue. It was still wrong and subject to
possible race conditions or future breakage if the sequence of functions
would change.
The data.set.str[] strings MUST remain unmodified exactly as set by the
user, and the credentials to use internally are instead set/updated in
state.aptr.*
Added test 675 to verify different credentials used in two requests done
over a reused HTTP connection, which previously behaved wrongly.
Fixes#6542Closes#6545
Rename it to 'httpwant' and make a cloned field in the state struct as
well for run-time updates.
Also: refuse non-supported HTTP versions. Verified with test 129.
Closes#6585
and rename it from 'ftp_list_only' since it is also used for SSH and
POP3. The state is updated internally for 'type=D' FTP URLs.
Added test case 1570 to verify.
Closes#6578
... and make sure the code never updates 'set.prefer_ascii' as it breaks
handle reuse which should use the setting as the user specified it.
Added test 1569 to verify: it first makes an FTP transfer with ';type=A'
and then another without type on the same handle and the second should
then use binary. Previously, curl failed this.
Closes#6578
Since the set value then risks getting used like that when the easy
handle is reused by the application.
Also: renamed the struct field from 'ftp_append' to 'remote_append'
since it is also used for SSH protocols.
Closes#6579
- Add support services without region and service prefixes in
the URL endpoint (ex. Min.IO, GCP, Yandex Cloud, Mail.Ru Cloud Solutions, etc)
by providing region and service parameters via aws-sigv4 option.
- Add [:region[:service]] suffix to aws-sigv4 option;
- Fix memory allocation errors.
- Refactor memory management.
- Use Curl_http_method instead() STRING_CUSTOMREQUEST.
- Refactor canonical headers generating.
- Remove repeated sha256_to_hex() usage.
- Add some docs fixes.
- Add some codestyle fixes.
- Add overloaded strndup() for debug - curl_dbg_strndup().
- Update tests.
Closes#6524
