- add hex and octal parsers to the Curl_str_* family
- make curlx_strtoofft use these parsers
- remove all use of strtol() and strtoul() in library code
- generally use Curl_str_* more than strtoofft, for stricter parsing
- supports 64-bit universally, instead of 'long' which differs in size
between platforms
Extended the unit test 1664 to verify hex and octal parsing.
Closes#16336
Instead of strtoul() and strtol() calls.
Easier API with better integer overflow detection and built-in max check
that now comes automatic everywhere this is used.
Closes#16319
Adds a `follow()` callback to protocol handlers, so they may decide how
to act on a `newurl` after a request has been done. This is optional.
This moves the HTTP code for handling redirects from multi.c to http.c
where it should be. If we ever add a protocol with its own logic, it
would install its own follow function.
Closes#16075
`Makefile.mk` supported MS-DOS and Amiga, but `./configure` also
supported them in a better tested and more flexible way.
This patch also adds CMake support for MS-DOS/DJGPP and Amiga OS 3.
`Makefile.mk` was not maintained. Delete it in favour of first-tier
build methods.
Also include some non-MS-DOS/AmigaOS-specific tidy-up, see details at
the end of this message.
Details:
- fix/silence all MS-DOS/DJGPP build warnings and issues.
- add MS-DOS support to cmake.
- default to `ENABLE_THREADED_RESOLVER=OFF` for MS-DOS.
- add support for `WATT_ROOT`.
- use static libcurl with MS-DOS.
- fixup default CMake suffixes/prefixes for DJGPP.
- disable hidden symbols for MS-DOS. Not supported on MS-DOS.
- opt-in MS-DOS into `USE_UNIX_SOCKETS`.
- improve MS-DOS support in autotools.
- default to `--disable-threaded-resolver` for MS-DOS.
- make sure to use `close_s()` (from Watt-32) with autotools and cmake.
`Makefile.mk` used it before this patch.
- GHA: add DJGPP cmake (~30s) and autotools (~60s) build jobs.
Also build tests and examples with cmake.
- improve AmigaOS support in autotools:
- configure: detect `CloseSocket()` when it's a macro.
- configure: fix `IoctlSocket` detection on AmigaOS.
- curl-amissl.m4: pass AmiSSL libs to tests/servers.
- add AmigaOS3 support to cmake:
- cmake: fix `HAVE_IOCTLSOCKET_CAMEL` and
`HAVE_IOCTLSOCKET_CAMEL_FIONBIO` detections.
- set necessary system libs.
- add AmiSSL support.
- inet_ntop, inet_pton: fix using it for AmigaOS. cmake detects them,
and they did not compile with AmigaOS.
- cmake: better sync `gethostname` detection with autotools.
Fixes detection for AmigaOS, where `gethostname` is a macro.
- cmake: fix `sys/utime.h` detection on AmigaOS.
- cmake: force-disable `getaddrinfo` for AmigaOS.
- cmake: tweak threading and static/shared default for AmigaOS.
- cmake: rely on manual variable `AMIGA` to enable the platform.
- GHA: add AmigaOS cmake and autotools (~45s) jobs.
Also build tests and examples with cmake.
- INSTALL: update MS-DOS and AmigaOS build instructions.
- amigaos: fix `-Wpointer-sign` and
`zero or negative size array '_args'` in `Printf()`.
- amigaos: fix `-Wpointer-sign`
- amigaos: fix `-Wredundant-decls` `errno` and `h_errno`.
- amigaos: brute-force silence `lseek()` size warnings.
- amigaos: server/resolve: silence `-Wdiscarded-qualifiers`.
- amigaos: server/resolve: fix `-Wpointer-sign`.
- amigaos: fix `CURL_SA_FAMILY_T` type.
- nonblock: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
`ioctl` is also detected, but fails when used. Make the above override
it for a successful build.
Authored-by: Darren Banfi
Fixes#15537Closes#15603
- tftpd: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
- tftpd: tidy-up conditional code.
- curl: set stack size to 16384 for AmigaOS3/4
Overriding the default 4096.
Suggested-by: Darren Banfi
Ref: https://github.com/curl/curl/pull/15543#issuecomment-2498783123
Ref: https://wiki.amigaos.net/wiki/Controlling_Application_Stack
- functypes.h: fix `SEND_QUAL_ARG2` for AmigaOS.
- tftp: add missing cast in sendto() call for AmigaOS.
- getinfo: fix warning with AmigaOS.
- tool_operate: silence warning with AmigaOS
- amigaos: fix building libtests due to missing `RLIMIT_NOFILE`.
- curl_gethostname: silence warning for AmigaOS.
- ftp: silence `-Wtype-limits` for AmigaOS.
- libtest: fix timeval initialization for AmigaOS.
- examples: fix `timeval` initialization for AmigaOS.
- examples: silence warning for AmigaOS.
- configure: fix IPv6 detection for cross-builds.
- netrc: fix to build with AmigaOS cleanly.
- buildinfo: detect and add `DOS` tag for MS-DOS builds.
- buildinfo: add `AMIGA` to buildinfo.txt in auttools.
- build: move `USE_WATT32` macro definition to cmake/configure.
Non-MS-DOS/AmigeOS-specific tidy-ups:
- configure: sync `sa_family_t` detection with cmake.
- configure: sync `ADDRESS_FAMILY` detection signals with cmake.
- doh: use `CURL_SA_FAMILY_T`.
- lib: drop mingw-specific `CURL_SA_FAMILY_T` workaround.
- cmake: extend instead of override check-specific
configurations/requirements.
This allows to honor global requirements added earlier.
Necessary for AmigaOS for example.
- cmake: omit warning on disabled IPv6 for MS-DOS and AmigaOS.
No IPv6 support on these platforms. Also sync with autotools.
- lib1960: use libcurl `inet_pton()` wrapper.
- cmake: detect LibreSSL (to match autotools).
- cmake: say the specific OpenSSL flavour detected.
- hostip: add missing `HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID` guard.
- lib: simplify classic mac feature guards.
Follow-up to a8861b6ccd#9764Closes#15543
- fix MSH3 static symbol clash.
- fix Quiche static symbol clash.
- fix local macro clash with BearSSL header.
- fix local macro clash with OmniOS system header.
```
In file included from ../../lib/urldata.h:197,
from ../../lib/altsvc.c:32,
from libcurlall.c:2:
../../lib/cf-socket.h:55:25: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
55 | #define sa_addr _sa_ex_u.addr
| ^
In file included from ../../lib/urldata.h:197,
from ../../lib/altsvc.c:32,
from libcurlall.c:2:
../../lib/cf-socket.h:55:25: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
55 | #define sa_addr _sa_ex_u.addr
| ^
```
Ref: https://github.com/curl/curl/actions/runs/10738314933/job/29781644299?pr=14772#step:3:6115
Discovered while adding support for "unity" builds for autotools.
Required-by: #14922
Cherry-picked from #14815Closes#14932
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
- clarify Curl_xfer_setup() with RECV/SEND flags and different calls for
which socket they operate on. Add a shutdown flag for secondary
sockets
- change Curl_xfer_setup() calls to new functions
- implement non-blocking connection shutdown at the end of receiving or
sending a transfer
Closes#13913
Seen when setting `ENABLE_DEBUG=ON` and `-DDEBUGBUILD` for mingw-w64
gcc 13.2.0 CMake unity builds in 'Release' configurations.
```
curl/lib/curl_gethostname.c:71:5: error: 'strncpy' specified bound 1025 equals destination size [-Werror=stringop-truncation]
71 | strncpy(name, force_hostname, namelen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from curl/_bld/lib/CMakeFiles/libcurl_object.dir/Unity/unity_0_c.c:175:
In function 'hostcache_timestamp_remove',
inlined from 'Curl_hash_clean_with_criterium' at curl/lib/hash.c:265:19,
inlined from 'Curl_hash_clean_with_criterium' at curl/lib/hash.c:247:1,
inlined from 'hostcache_prune' at curl/lib/hostip.c:228:3,
inlined from 'Curl_hostcache_prune' at curl/lib/hostip.c:256:21:
curl/lib/hostip.c:205:12: error: 'now' may be used uninitialized [-Werror=maybe-uninitialized]
205 | time_t age = prune->now - c->timestamp;
| ^~~
curl/lib/hostip.c: In function 'Curl_hostcache_prune':
curl/lib/hostip.c:241:10: note: 'now' was declared here
241 | time_t now;
| ^~~
In function 'hostcache_timestamp_remove',
inlined from 'fetch_addr' at curl/lib/hostip.c:310:8:
curl/lib/hostip.c:205:23: error: 'user.now' may be used uninitialized [-Werror=maybe-uninitialized]
205 | time_t age = prune->now - c->timestamp;
| ~~~~~^~~~~
curl/lib/hostip.c: In function 'fetch_addr':
curl/lib/hostip.c:304:33: note: 'user' declared here
304 | struct hostcache_prune_data user;
| ^~~~
In file included from curl/_bld/lib/CMakeFiles/libcurl_object.dir/Unity/unity_0_c.c:40:
curl/lib/cf-socket.c: In function 'cf_socket_send':
curl/lib/cf-socket.c:1294:10: error: 'c' may be used uninitialized [-Werror=maybe-uninitialized]
1294 | if(c >= ((100-ctx->wblock_percent)*256/100)) {
| ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
curl/lib/cf-socket.c:1292:19: note: 'c' was declared here
1292 | unsigned char c;
| ^
In file included from curl/_bld/lib/CMakeFiles/libcurl_object.dir/Unity/unity_0_c.c:364:
In function 'tftp_state_timeout',
inlined from 'tftp_multi_statemach' at curl/lib/tftp.c:1230:27:
curl/lib/tftp.c:1208:5: error: 'current' may be used uninitialized [-Werror=maybe-uninitialized]
1208 | if(current > state->rx_time + state->retry_time) {
| ^
curl/lib/tftp.c: In function 'tftp_multi_statemach':
curl/lib/tftp.c:1192:10: note: 'current' was declared here
1192 | time_t current;
| ^~~~~~~
```
Ref: https://ci.appveyor.com/project/curlorg/curl/builds/49792835/job/91c8dj5qb36spfe0#L112
Ref: https://github.com/curl/curl/actions/runs/9082968838/job/24960616145#step:12:62
Ref: #13592Closes#13643
- Move all the "upload_done" handling to request.c
- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean
- removing data->state.ulbuf and data->req.upload_fromhere
- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer
- tftp, remove setting of data->req.upload_fromhere
- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway
- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition
- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending
- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf
Closes#13010
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk (to be made
into a sperate PR, also)
Added as documented [in
CLIENT-READER.md](5b1f31dfba/docs/CLIENT-READERS.md).
- old `Curl_buffer_send()` completely replaced by new `Curl_req_send()`
- old `Curl_fillreadbuffer()` replaced with `Curl_client_read()`
- HTTP chunked uploads are now formatted in a client reader added when
needed.
- FTP line-end conversions are done in a client reader added when
needed.
- when sending requests headers, remaining buffer space is filled with
body data for sending in "one go". This is independent of the request
body size. Resolves#12938 as now small and large requests have the
same code path.
Changes done to test cases:
- test513: now fails before sending request headers as this initial
"client read" triggers the setup fault. Behaves now the same as in
hyper build
- test547, test555, test1620: fix the length check in the lib code to
only fail for reads *smaller* than expected. This was a bug in the
test code that never triggered in the old implementation.
Closes#12969
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
This clarifies the handling of server responses by folding the code for
the complicated protocols into their protocol handlers. This concerns
mainly HTTP and its bastard sibling RTSP.
The terms "read" and "write" are often used without clear context if
they refer to the connect or the client/application side of a
transfer. This PR uses "read/write" for operations on the client side
and "send/receive" for the connection, e.g. server side. If this is
considered useful, we can revisit renaming of further methods in another
PR.
Curl's protocol handler `readwrite()` method been changed:
```diff
- CURLcode (*readwrite)(struct Curl_easy *data, struct connectdata *conn,
- const char *buf, size_t blen,
- size_t *pconsumed, bool *readmore);
+ CURLcode (*write_resp)(struct Curl_easy *data, const char *buf, size_t blen,
+ bool is_eos, bool *done);
```
The name was changed to clarify that this writes reponse data to the
client side. The parameter changes are:
* `conn` removed as it always operates on `data->conn`
* `pconsumed` removed as the method needs to handle all data on success
* `readmore` removed as no longer necessary
* `is_eos` as indicator that this is the last call for the transfer
response (end-of-stream).
* `done` TRUE on return iff the transfer response is to be treated as
finished
This change affects many files only because of updated comments in
handlers that provide no implementation. The real change is that the
HTTP protocol handlers now provide an implementation.
The HTTP protocol handlers `write_resp()` implementation will get passed
**all** raw data of a server response for the transfer. The HTTP/1.x
formatted status and headers, as well as the undecoded response
body. `Curl_http_write_resp_hds()` is used internally to parse the
response headers and pass them on. This method is public as the RTSP
protocol handler also uses it.
HTTP/1.1 "chunked" transport encoding is now part of the general
*content encoding* writer stack, just like other encodings. A new flag
`CLIENTWRITE_EOS` was added for the last client write. This allows
writers to verify that they are in a valid end state. The chunked
decoder will check if it indeed has seen the last chunk.
The general response handling in `transfer.c:466` happens in function
`readwrite_data()`. This mainly operates now like:
```
static CURLcode readwrite_data(data, ...)
{
do {
Curl_xfer_recv_resp(data, buf)
...
Curl_xfer_write_resp(data, buf)
...
} while(interested);
...
}
```
All the response data handling is implemented in
`Curl_xfer_write_resp()`. It calls the protocol handler's `write_resp()`
implementation if available, or does the default behaviour.
All raw response data needs to pass through this function. Which also
means that anyone in possession of such data may call
`Curl_xfer_write_resp()`.
Closes#12480
This PR has these changes:
Renaming of unencode_* to cwriter, e.g. client writers
- documentation of sendf.h functions
- move max decode stack checks back to content_encoding.c
- define writer phase which was used as order before
- introduce phases for monitoring inbetween decode phases
- offering default implementations for init/write/close
Add type paramter to client writer's do_write()
- always pass all writes through the writer stack
- writers who only care about BODY data will pass other writes unchanged
add RAW and PROTOCOL client writers
- RAW used for Curl_debug() logging of CURLINFO_DATA_IN
- PROTOCOL used for updates to data->req.bytecount, max_filesize checks and
Curl_pgrsSetDownloadCounter()
- remove all updates of data->req.bytecount and calls to
Curl_pgrsSetDownloadCounter() and Curl_debug() from other code
- adjust test457 expected output to no longer see the excess write
Closes#12184
Previously it would only stop them from getting started if the size is
known to be too big then.
Update the libcurl and curl docs accordingly.
Fixes#11810
Reported-by: Elliot Killick
Assisted-by: Jay Satiro
Closes#11820
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
- copy `struct Curl_addrinfo` on filter setup into context
- remove `struct Curl_addrinfoi *` with `struct Curl_sockaddr_ex *` in
connectdata that is set and NULLed by the socket filter
- this means we have no reference to the resolver info in connectdata or
its filters
- trigger the CF_CTRL_CONN_INFO_UPDATE event when the complete filter
chain reaches connected status
- update easy handle connection information on CF_CTRL_DATA_SETUP event.
Closes#10213
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
... and make connect_init() refusing trying to tunnel protocols marked
as not working. Avoids a double-free.
Reported-by: Even Rouault
Fixes#8018Closes#8020
- replace broken URL with the one it was most probably pointing to
when added (lib/tftp.c)
- replace broken URL with archive.org link (lib/curl_ntlm_wb.c)
- delete unnecessary protocol designator from archive.org URL
(docs/BINDINGS.md)
Closes#7562
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
The libssh2 backend has SSH session associated with the connection but
the callback context is the easy handle, so when a connection gets
attached to a transfer, the protocol handler now allows for a custom
function to get used to set things up correctly.
Reported-by: Michael O'Farrell
Fixes#6898Closes#7078
... and make sure the code never updates 'set.prefer_ascii' as it breaks
handle reuse which should use the setting as the user specified it.
Added test 1569 to verify: it first makes an FTP transfer with ';type=A'
and then another without type on the same handle and the second should
then use binary. Previously, curl failed this.
Closes#6578
- Reorder some internal struct members so that less padding is used.
This is an attempt at saving a bit of space by packing some structs
(using pahole to find the holes) where it might make sense to do
so without losing readability.
I.e., I tried to avoid separating fields that seem grouped
together (like the cwd... fields in struct ftp_conn for instance).
Also abstained from touching fields behind conditional macros as
that quickly can get complicated.
Closes https://github.com/curl/curl/pull/6483
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
