- Pelles C: Unclear status, failed to obtain a fresh copy a few months
ago. Possible website is HTTP-only. ~10 years ago I left this compiler
dealing with crashes and other issues with no response on the forum
for years. It has seen some activity in curl back in 2021.
- LCC: Last stable release in September 2002.
- Salford C: Misses winsock2 support, possibly abandoned? Last mentioned
in 2006.
- Borland C++: We dropped Borland C++ support in 2018.
- MS Visual C++ 6.0: Released in 1998. curl already requires VS 2010
(or possibly 2008) as a minimum.
Closes#12222
- resolving is done for a connection, not for every transfer
- save create/dup/free of a cares channel for each transfer
- check values of setopt calls against a local channel if no
connection has been attached yet, when needed.
Closes#12198
- use CLIENTWRITE_BODY *only* when data is actually body data
- add CLIENTWRITE_INFO for meta data that is *not* a HEADER
- debug assertions that BODY/INFO/HEADER is not used mixed
- move `data->set.include_header` check into Curl_client_write
so protocol handlers no longer have to care
- add special in FTP for `data->set.include_header` for historic,
backward compatible reasons
- move unpausing of client writes from easy.c to sendf.c, so that
code is in one place and can forward flags correctly
Closes#11885
Plus: reduce the hash table size from 256 to 63. It seems unlikely to
make much of a speed difference for most use cases but saves 1.5KB of
data per instance.
Closes#11862
https://github.com/curl/curl/pull/7121 introduced a macOS system call
to `SCDynamicStoreCopyProxies`, which is invoked every time an IP
address needs to be resolved.
However, this system call is not thread-safe, and macOS will kill the
process if the system call is run first in a fork. To make it possible
for the parent process to call this once and prevent the crash, only
invoke this system call in the global initialization routine.
In addition, this change is beneficial because it:
1. Avoids extra macOS system calls for every IP lookup.
2. Consolidates macOS-specific initialization in a separate file.
Fixes#11252Closes#11254
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
By insisting that the passed in handle is "good" (the magic number is
intact), this can limit the potential damage if a bad pointer is passed
in. Like when this function is called twice on the same handle pointer.
Ref: #10964Closes#11061
- state is fully kept at connection, since curl_ws_send() and
curl_ws_rec() have lifetime beyond usual transfers
- no more limit on frame sizes
Reported-by: simplerobot on github
Fixes#10962Closes#10999
The only user of this define was 'chkdecimalpoint' - a special purpose
test tool that was built but not used anymore (since 17c18fbc3 - Apr
2020).
Closes#10908
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
The cookiefile entries are set into the handle and should remain set for
the lifetime of the handle so that duplicating it also duplicates the
list. Therefore, the struct field is moved from 'state' to 'set'.
Fixes#10133Closes#10134
Deprecation and removal of codeset conversion support from the library
have released the strict need for an early binding of mime structures to
an easy handle (https://github.com/curl/curl/commit/2610142).
This constraint currently forces to create the handle before the mime
structure and the latter cannot be attached to another handle once
created (see https://curl.se/mail/lib-2022-08/0027.html).
This commit removes the handle pointers from the mime structures
allowing more flexibility on their use.
When an easy handle is duplicated, bound mime structures must however
still be duplicated too as their components hold send-time dynamic
information.
Closes#9927
curl_ws_recv() now receives data to fill up the provided buffer, but can
return a partial fragment. The function now also get a pointer to a
curl_ws_frame struct with metadata that also mentions the offset and
total size of the fragment (of which you might be receiving a smaller
piece). This way, large incoming fragments will be "streamed" to the
application. When the curl_ws_frame struct field 'bytesleft' is 0, the
final fragment piece has been delivered.
curl_ws_recv() was also adjusted to work with a buffer size smaller than
the fragment size. (Possibly needless to say as the fragment size can
now be 63 bit large).
curl_ws_send() now supports sending a piece of a fragment, in a
streaming manner, in addition to sending the entire fragment in a single
call if it is small enough. To send a huge fragment, curl_ws_send() can
be used to send it in many small calls by first telling libcurl about
the total expected fragment size, and then send the payload in N number
of separate invokes and libcurl will stream those over the wire.
The struct curl_ws_meta() returns is now called 'curl_ws_frame' and it
has been extended with two new fields: *offset* and *bytesleft*. To help
describe the passed on data chunk when a fragment is delivered in many
smaller pieces.
The documentation has been updated accordingly.
Closes#9636
The mentioned "last 3 includes" order should be respected. easy_lock.h should
be included before those three.
Reported-by: Yuriy Chernyshov
Fixes#9560Closes#9561
Have curl_multi_init() use a much larger DNS hash table than used for
the easy interface to scale and perform better when used with _many_
host names.
curl_share_init() sets an in-between size.
Inspired-by: Ivan Tsybulin
See #9340Closes#9376
.. and update some docs to explain curl_global_* is now thread-safe.
Follow-up to 23af112 which made curl_global_init/cleanup thread-safe.
Closes https://github.com/curl/curl/pull/9016
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
Adds two new error codes: CURLE_UNRECOVERABLE_POLL and
CURLM_UNRECOVERABLE_POLL one each for the easy and the multi interfaces.
Reported-by: Harry Sintonen
Fixes#8921Closes#8961
The callbacks were partially documented to support this. Now the
behavior is documented and returning error from either of these
callbacks will effectively kill all currently ongoing transfers.
Added test 530 to verify
Reported-by: Marcelo Juchem
Fixes#8083Closes#8089
During the protocol-specific parts of connection upkeep, some code
assumes that the data->conn pointer already is set correctly. However,
there's currently no guarantee of that in the code.
This fix temporarily attaches each connection to the Curl_easy object
before performing the protocol-specific connection check on it, in a
similar manner to the connection checking in extract_if_dead().
Fixes#7386Closes#7387
Reported-by: Josie Huddleston
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
Both were used for the same purposes and there was no logical separation
between them. Combined, this also saves 16 bytes in less holes in my
test build.
Closes#6798
While working on documenting the states it dawned on me that step one is
to use more descriptive names on the states. This also changes prefix on
the states to make them shorter in the source.
State names NOT ending with *ing are transitional ones.
Closes#6612
The Curl_easy pointer struct entry in connectdata is now gone. Just
before commit 215db086e0 landed on January 8, 2021 there were 919
references to conn->data.
Closes#6608
... in most cases instead of 'struct connectdata *' but in some cases in
addition to.
- We mostly operate on transfers and not connections.
- We need the transfer handle to log, store data and more. Everything in
libcurl is driven by a transfer (the CURL * in the public API).
- This work clarifies and separates the transfers from the connections
better.
- We should avoid "conn->data". Since individual connections can be used
by many transfers when multiplexing, making sure that conn->data
points to the current and correct transfer at all times is difficult
and has been notoriously error-prone over the years. The goal is to
ultimately remove the conn->data pointer for this reason.
Closes#6425
... to make build tools/valgrind warn if no curl_global_cleanup is
called.
This is conditionally only done for debug builds with the env variable
CURL_GLOBAL_INIT set.
Closes#6410
Paused transfers should not be stopped due to slow speed even when
CURLOPT_LOW_SPEED_LIMIT is set. Additionally, the slow speed timer is
now reset when the transfer is unpaused - as otherwise it would easily
just trigger immediately after unpausing.
Reported-by: Harry Sintonen
Fixes#6358Closes#6359
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
The cache content is not duplicated, like other caches, but the setting
and specified file name are.
Test 1908 is extended to verify this somewhat. Since the duplicated
handle gets the same file name, the test unfortunately overwrites the
same file twice (with different contents) which makes it hard to check
automatically.
Closes#5923
Now that all functions in select.[ch] take timediff_t instead
of the limited int or long, we can remove type conversions
and related preprocessor checks to silence compiler warnings.
Avoiding conversions from time_t was already done in 842f73de.
Based upon #5262
Supersedes #5214, #5220 and #5221
Follow up to #5343 and #5479Closes#5490
... and free it as soon as the transfer is done. It removes the extra
alloc when a new size is set with setopt() and reduces memory for unused
easy handles.
In addition: the closure_handle now doesn't use an allocated buffer at
all but the smallest supported size as a stack based one.
Closes#5472
This change introduces a generic way to provide binary data in setopt
options, called BLOBs.
This change introduces these new setopts:
CURLOPT_ISSUERCERT_BLOB, CURLOPT_PROXY_SSLCERT_BLOB,
CURLOPT_PROXY_SSLKEY_BLOB, CURLOPT_SSLCERT_BLOB and CURLOPT_SSLKEY_BLOB.
Reviewed-by: Daniel Stenberg
Closes#5357
A common set of functions instead of many separate implementations for
creating buffers that can grow when appending data to them. Existing
functionality has been ported over.
In my early basic testing, the total number of allocations seem at
roughly the same amount as before, possibly a few less.
See docs/DYNBUF.md for a description of the API.
Closes#5300
- Ignore CURLE_NOT_BUILT_IN errors returned by c-ares functions in
curl_easy_duphandle.
Prior to this change if c-ares was used as the resolver backend and
either it was too old or libcurl was built without IPv6 support then
some of our resolver functions could return CURLE_NOT_BUILT_IN to
curl_easy_duphandle causing it to fail.
Caused by c8f086b which shipped in 7.69.1.
Reported-by: Karl Chen
Fixes https://github.com/curl/curl/issues/5097
Closes https://github.com/curl/curl/pull/5100
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
With c-ares the dns parameters lives in ares_channel. Store them in the
curl handle and set them again in easy_duphandle.
Regression introduced in #3228 (6765e6d), shipped in curl 7.63.0.
Fixes#4893Closes#5020
Signed-off-by: Ernst Sjöstrand <ernst.sjostrand@verisure.com>
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes#4813
Reported-by: MrdUkk on github
Closes#4833
... since the socket might not actually be readable anymore when for
example the data is already buffered in the TLS layer.
Fixes#4966
Reported-by: Anders Berg
Closes#5000
This reduces the HTTP/2 window size to 32 MB since libcurl might have to
buffer up to this amount of data in memory and yet we don't want it set
lower to potentially impact tranfer performance on high speed networks.
Requires nghttp2 commit b3f85e2daa629
(https://github.com/nghttp2/nghttp2/pull/1444) to work properly, to end
up in the next release after 1.40.0.
Fixes#4939Closes#4940
Previously it was stored in a global state which contributed to
curl_global_init's thread unsafety. This boolean is now instead figured
out in curl_multi_init() and stored in the multi handle. Less effective,
but thread safe.
Closes#4851
- Removed from global_init since it isn't thread-safe. The symbol will
still remain to not break compiles, it just won't have any effect going
forward.
- make the internals NOT loop on EINTR (the opposite from previously).
It only risks returning from the select/poll/wait functions early, and that
should be risk-free.
Closes#4840
... so that failures in the global init function don't count as a
working init and it can then be called again.
Reported-by: Paul Groke
Fixes#4636Closes#4653
