Rework the event based handling of transfers and connections to
be "localized" into a single source file with clearer dependencies.
- add multi_ev.c and multi_ev.h
- add docs/internal/MULTI-EV.md to explain the overall workings
- only do event handling book keeping when the socket callback
is set
- add handling for "connection only" event tracking, when internal
easy handles are used that are not really tied to a connection.
Used in connection pool.
- remove transfer member "last_poll" and connections "shutdown_poll"
and keep all that internal to multi_ev.c
- add CURL_TRC_M() for tracing of "multi" related things, including
event handling and connection pool operations. Add new trace
feature "multi" for trace config.
multi traces will show exactly what is going on in regard to
event handling.
- multi: trace transfers "mstate" in every CURL_TRC_M() call
- make internal trace buffer 2048 bytes and end the silliness
with +n here -m there. Adjust test 1652 expectations of resulting
length and input edge cases.
- add trace feature "lib-ids" to perfix libcurl traces with transfer
and connection ids. Useful for debugging libcurl applications.
Closes#16308
lib : remove all hyper code
configure: stop detecting hyper
docs: no more mention of hyper
tests: mo more special-handling of hyper builds
CI: no jobs using hyper
Closes#15120
Described in detail in internal doc TLS-SESSIONS.md
Main points:
- use a new `ssl_peer_key` for cache lookups by connection filters
- recognize differences between TLSv1.3 and other tickets
* TLSv1.3 tickets are single-use, cache can hold several of them for a peer
* TLSv1.2 are reused, keep only a single one per peer
- differentiate between ticket BLOB to store (that could be persisted) and object instances
- use put/take/return pattern for cache access
- remember TLS version, ALPN protocol, time received and lifetime of ticket
- auto-expire tickets after their lifetime
Closes#15774
Designed to aid converting off from sscanf parsers. sscanf is hard to
use right, easy to mess up and often makes for sloppy error checking.
The new parsers allow more exact and pedandic parsing.
This new set of functions should be possible to use (and extend) and
switch over other libcurl parser code to use going forward.
Adapts the following to use the new functions:
- altsvc.c
- hsts.c
- http_aws_sigv4.c
Bonus: fewer memory copies, fewer stack buffers.
Test: Unit test1664
Docs: docs/internals/STRPARSE.md
Closes#15692
This partly reverts 0e06603b23
These file formats are not properly documented elsewhere, plus the
website uses these files to populate the documentation pages to which
users end up via the URLs that are mentioned within the alt-svc and hsts
files.
Fixes#15705
Reported-by: Jeffrey Bosboom
Closes#15706
These are files and documentation for established functionality that
should by now be covered properly and completely in the standard
documentation and in everything curl. Having these extra files provides
duplicated information where they risk being out of sync.
Closes#14553
- converted the Curl_hash_count() macro to a function
- Discourage accessing struct fields directly
- Document the internal API in HASH.md
Closes#14503
Give a more consice overview of curl's cipher options and cipher suites.
Removed long lists of ciphers that were directly copied from the SSL
backends' documentation. Instead present the user a more common aproach
acorss the SSL backends, with notes for backends that do not conform
and/or provide alternate means.
Provide a shorter list of cipher suites that is more relevant for modern
usage and should work mostly across all backends, provide a seperate
list with all cipher suites, and provide links to the SSL backends'
documentation for more information.
Also give examples with modern cipher suites.
Add docs/CIPHERS-TLS12.md for TLS 1.2 ciphers.
Closes#14460
- Turned them all into functions to also do asserts etc.
- The llist related structs got all their fields renamed in order to make
sure no existing code remains using direct access.
- Each list node struct now points back to the list it "lives in", so
Curl_node_remove() no longer needs the list pointer.
- Rename the node struct and some of the access functions.
- Added lots of ASSERTs to verify API being used correctly
- Fix some cases of API misuse
Add docs/LLIST.md documenting the internal linked list API.
Closes#14485
Lots of organizations distribute curl packages to end users. This is a
collection of pointers to where to learn more about curl on and with
each distro.
Assisted-by: Alan Coopersmith
Assisted-by: Andrew Kaster
Assisted-by: Andy Fiddaman
Assisted-by: Arjan van de Ven
Assisted-by: Brian Clemens
Assisted-by: chrysos349 on github
Assisted-by: Dan Fandrich
Assisted-by: Dan McDonald
Assisted-by: Gaelan Steele
Assisted-by: graywolf on github
Assisted-by: Jan Macku
Assisted-by: John Marshall
Assisted-by: Jonathan Perkin
Assisted-by: Kevin Daudt
Assisted-by: Marcus Müller
Assisted-by: Michał Górny
Assisted-by: Outvi V
Assisted-by: Ross Burton
Assisted-by: Sean Molenaar
Assisted-by: Till Wegmüller
Assisted-by: Viktor Szakats
Assisted-by: Winni Neessen
Closes#13178
Create ASCII version of manpage without nroff
- build src/tool_hugegelp.c from the ascii manpage
- move the the manpage and the ascii version build to docs/cmdline-opts
- remove all use of nroff from the build process
- should make the build entirely reproducible (by avoiding nroff)
- partly reverts 2620aa9 to build libcurl option man pages one by one
in cmake because the appveyor builds got all crazy until I did
The ASCII version of the manpage
- is built with gen.pl, just like the manpage is
- has a right-justified column making the appearance similar to the previous
version
- uses a 4-space indent per level (instead of the old version's 7)
- does not do hyphenation of words (which nroff does)
History
We first made the curl build use nroff for building the hugehelp file in
December 1998, for curl 5.2.
Closes#13047
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk (to be made
into a sperate PR, also)
Added as documented [in
CLIENT-READER.md](5b1f31dfba/docs/CLIENT-READERS.md).
- old `Curl_buffer_send()` completely replaced by new `Curl_req_send()`
- old `Curl_fillreadbuffer()` replaced with `Curl_client_read()`
- HTTP chunked uploads are now formatted in a client reader added when
needed.
- FTP line-end conversions are done in a client reader added when
needed.
- when sending requests headers, remaining buffer space is filled with
body data for sending in "one go". This is independent of the request
body size. Resolves#12938 as now small and large requests have the
same code path.
Changes done to test cases:
- test513: now fails before sending request headers as this initial
"client read" triggers the setup fault. Behaves now the same as in
hyper build
- test547, test555, test1620: fix the length check in the lib code to
only fail for reads *smaller* than expected. This was a bug in the
test code that never triggered in the old implementation.
Closes#12969
- Turn docs/INSTALL.cmake into a proper markdown file,
docs/INSTALL-CMAKE.md
- Move things around to divide the description into configuration,
building and installing sections
- Mention the more modern cmake options to configure, build and install,
but also retain the older variants as fallbacks
Closes#12772
curldown is this new file format for libcurl man pages. It is markdown
inspired with differences:
- Each file has a set of leading headers with meta-data
- Supports a small subset of markdown
- Uses .md file extensions for editors/IDE/GitHub to treat them nicely
- Generates man pages very similar to the previous ones
- Generates man pages that still convert nicely to HTML on the website
- Detects and highlights mentions of curl symbols automatically (when
their man page section is specified)
tools:
- cd2nroff: converts from curldown to nroff man page
- nroff2cd: convert an (old) nroff man page to curldown
- cdall: convert many nroff pages to curldown versions
- cd2cd: verifies and updates a curldown to latest curldown
This setup generates .3 versions of all the curldown versions at build time.
CI:
Since the documentation is now technically markdown in the eyes of many
things, the CI runs many more tests and checks on this documentation,
including proselint, link checkers and tests that make sure we capitalize the
first letter after a period...
Closes#12730
The previously built man page "curl.1" must be copied with the original
modification date, otherwise the man page is never updated.
This fixes a bug that has been introduced with commit 2568441cab.
Reviewed-by: Dan Fandrich
Reviewed-by: Daniel Stenberg
Closes#12199
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
- general construct/destroy in connectdata
- default implementations of callback functions
- connect: cfilters for connect and accept
- socks: cfilter for socks proxying
- http_proxy: cfilter for http proxy tunneling
- vtls: cfilters for primary and proxy ssl
- change in general handling of data/conn
- Curl_cfilter_setup() sets up filter chain based on data settings,
if none are installed by the protocol handler setup
- Curl_cfilter_connect() boot straps filters into `connected` status,
used by handlers and multi to reach further stages
- Curl_cfilter_is_connected() to check if a conn is connected,
e.g. all filters have done their work
- Curl_cfilter_get_select_socks() gets the sockets and READ/WRITE
indicators for multi select to work
- Curl_cfilter_data_pending() asks filters if the have incoming
data pending for recv
- Curl_cfilter_recv()/Curl_cfilter_send are the general callbacks
installed in conn->recv/conn->send for io handling
- Curl_cfilter_attach_data()/Curl_cfilter_detach_data() inform filters
and addition/removal of a `data` from their connection
- adding vtl functions to prevent use of Curl_ssl globals directly
in other parts of the code.
Reviewed-by: Daniel Stenberg
Closes#9855
This is how the RFC calls the protocol. Also rename the file in docs/ to
WEBSOCKET.md in uppercase to match how we have done it for many other
protocol docs in similar fashion.
Add the WebSocket docs to the tarball.
Closes#9496
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
A struct bufref holds a buffer pointer, a data size and a destructor.
When freed or its contents are changed, the previous buffer is implicitly
released by the associated destructor. The data size, although not used
internally, allows binary data support.
A unit test checks its handling methods: test 1661
Closes#6654
This also pins a specific release in the Travis test so future
API-breaking changins in crustls won't break curl builds.
Add RUSTLS documentation to release tarball.
Enable running tests for rustls, minus FTP tests (require
connect_blocking, which rustls doesn't implement) and 313 (requires CRL
handling).
Closes#6763
- enable in the build (configure)
- header parsing
- host name lookup
- unit tests for the above
- CI build
- CURL_VERSION_HSTS bit
- curl_version_info support
- curl -V output
- curl-config --features
- CURLOPT_HSTS_CTRL
- man page for CURLOPT_HSTS_CTRL
- curl --hsts (sets CURLOPT_HSTS_CTRL and works with --libcurl)
- man page for --hsts
- save cache to disk
- load cache from disk
- CURLOPT_HSTS
- man page for CURLOPT_HSTS
- added docs/HSTS.md
- fixed --version docs
- adjusted curl_easy_duphandle
Closes#5896
This document is not maintained and rather than trying to refresh it,
let's kill it. A more up-to-date document with relevant RFCs is this
page on the curl website: https://curl.haxx.se/rfc/Closes#5980
