- cache more Windows config results for faster initialization.
- delete unused config macros `HAVE_SYS_UTSNAME_H`, `HAVE_SSL_H`.
- delete dead references to `sys/utsname.h`.
Closes#11551
EGD is Entropy Gathering Daemon, a socket-based entropy source supported
by pre-OpenSSL v1.1 versions and now deprecated. curl also deprecated it
a while ago.
Its detection in CMake was broken all along because OpenSSL libs were
not linked at the point of feature check.
Delete detection from both cmake and autotools, along with the related
source snippet, and the `--with-egd-socket=` `./configure` option.
Closes#11556
This patch adds the ability to build a static and shared libcurl library
in a single build session. It also adds an option to select which one to
use when building the curl executable.
New build options:
- `BUILD_STATIC_LIBS`. Default: `OFF`.
Enabled automatically if `BUILD_SHARED_LIBS` is `OFF`.
- `BUILD_STATIC_CURL`. Default: `OFF`.
Requires `BUILD_STATIC_LIBS` enabled.
Enabled automatically if building static libcurl only.
- `STATIC_LIB_SUFFIX`. Default: empty.
- `IMPORT_LIB_SUFFIX`. Default: `_imp` if implib filename would collide
with static lib name (typically with MSVC) in Windows builds.
Otherwise empty.
Also:
- Stop setting the `CURL_STATICLIB` macro via `curl_config.h`, and pass
it directly to the compiler. This also allows to delete a condition
from `tests/server/CMakeLists.txt`.
- Complete a TODO by following the logic used in autotools (also for
`LIBCURL_NO_SHARED`), and set `-DCURL_STATICLIB` in `Cflags:` of
`libcurl.pc` for _static-only_ curl builds.
- Convert an existing CI test to build both shared and static libcurl.
Closes#11505
Extend existing picky compiler options with ones missing compared to
autotools builds. Also sync options between clang and gcc.
Redesign the way we enable these options to avoid the slow option
detection almost completely.
This reduces the number of detections from 35 to zero for clang and
3 for gcc, even after adding a bunch of new options.
clang 3.0 (2011-11-29) and gcc 2.95 (1999-07-31) now required.
Also show enabled picky options.
Ref: https://github.com/libssh2/libssh2/pull/952
Reviewed-by: Daniel Stenberg
Closes#10973
- add QUIC/ngtcp2 detection in CMake with wolfSSL.
Because wolfSSL uses zlib if available, move compression detection
before TLS detection. (OpenSSL might also need this in the future.)
- wolfSSL 5.5.0 started using C99 types in its `quic.h` header, but it
doesn't #include the necessary C99 header itself, breaking builds
(unless another dependency pulled it by chance.) Add local workaround
for it. For this to work with all build tools, we had to fix our
header detection first. Ref: #10745
Ref: 6ad5f6ecc1Closes#10739
Fix `stdint.h` and `inttypes.h` detection with non-autotools builds on
Windows. (autotools already auto-detected them accurately.)
`lib/config-win32.h` builds (e.g. `Makefile.mk`):
- set `HAVE_STDINT_H` where supported.
- set `HAVE_INTTYPES_H` for MinGW.
CMake:
- auto-detect them on Windows. (They were both force-disabled.)
- delete unused `CURL_PULL_STDINT_H`.
- delete unused `CURL_PULL_INTTYPES_H`.
- stop detecting `HAVE_STDINT_H` twice.
Present since the initial CMake commit: 4c5307b456
curl doesn't use these C99 headers, we need them now to workaround
broken wolfSSL builds. Ref: #10739
Once that clears up, we can delete these detections and macros (unless
we want to keep them for future us.)
Reviewed-by: Daniel Stenberg
Closes#10745
The package name passed to find_package_handle_standard_args (BROTLI)
does not match the name of the calling package (Brotli). This can lead
to problems in calling code that expects find_package result variables
(e.g., _FOUND) to follow a certain pattern.
Closes https://github.com/curl/curl/pull/10471
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Build systems like vcpkg alway sets `CMAKE_TOOLCHAIN_FILE` so it should
not be used as a sign that this is a cross-compile.
Also indented the function correctly.
Reported-by: Philip Chan
Fixes#9921Closes#9923
`Curl_getaddrinfo_ex()` gets _defined_ with `HAVE_GETADDRINFO` set. But,
`hostip4.c` _used_ it with `HAVE_GETADDRINFO_THREADSAFE` set alone. It
meant a build with the latter, but without the former flag could result
in calling this function but not defining it, and failing to link.
Patch this by adding an extra check for `HAVE_GETATTRINFO` around the
call.
Before this patch, build systems prevented this condition. Now they
don't need to.
While here, simplify the related CMake logic on Windows by setting
`HAVE_GETADDRINFO_THREADSAFE` to the detection result of
`HAVE_GETADDRINFO`. This expresses the following intent clearer than
the previous patch and keeps the logic in a single block of code:
When we have `getaddrinfo()` on Windows, it's always threadsafe.
Follow-up to 67d88626d4
Reviewed-by: Jay Satiro
Closes#9734
This patch aims to cleanup the use of `process.h` header and the macro
`HAVE_PROCESS_H` associated with it.
- `process.h` is always available on Windows. In curl, it is required
only for `_beginthreadex()` in `lib/curl_threads.c`.
- `process.h` is also available in MS-DOS. In curl, its only use was in
`lib/smb.c` for `getpid()`. But `getpid()` is in fact declared by
`unistd.h`, which is always enabled via `lib/config-dos.h`. So the
header is not necessary.
- `HAVE_PROCESS_H` was detected by CMake, forced to 1 on Windows and
left to real detection for other platforms.
It was also set to always-on in `lib/config-win32.h` and
`lib/config-dos.h`.
In autotools builds, there was no detection and the macro was never
set.
Based on these observations, in this patch we:
- Rework Windows `getpid` logic in `lib/smb.c` to always use the
equivalent direct Win32 API function `GetCurrentProcessId()`, as we
already did for Windows UWP apps. This makes `process.h` unnecessary
here on Windows.
- Stop #including `process.h` into files where it was not necessary.
This is everywhere, except `lib/curl_threads.c`.
> Strangely enough, `lib/curl_threads.c` compiled fine with autotools
> because `process.h` is also indirecty included via `unistd.h`. This
> might have been broken in autotools MSVC builds, where the latter
> header is missing.
- Delete all remaining `HAVE_PROCESS_H` feature guards, for they were
unnecessary.
- Delete `HAVE_PROCESS_H` detection from CMake and predefined values
from `lib/config-*.h` headers.
Reviewed-by: Jay Satiro
Closes#9703
`lib/config-win32.h` enables this configuration option unconditionally.
Make it apply to CMake builds as well.
While here, delete a broken check for
`HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID` from `CMakeLists.txt`. This came with
the initial commit [1], but did not include the actual verification code
inside `CMake/CurlTests.c`, so it always failed. A later commit [2]
added a second test, for non-Windows platforms.
Enabling this flag causes test 1056 to fail with CMake builds, as they
do with autotools builds. Let's apply the same solution and ignore the
results here as well.
[1] 4c5307b456
[2] aec7c5a87c
Reviewed-by: Daniel Stenberg
Assisted-by: Marcel Raad
Closes#9726
autotools enables this configuration option unconditionally for Windows
[^1]. Do the same in CMake.
The above will make this work for all reasonably recent environments.
The logic present in `lib/config-win32.h` [^2] has the following
exceptions which we did not cover in this CMake update:
- Builds targeting Windows 2000 and earlier
- MS Visual C++ 5.0 (1997) and earlier
Also make sure to disable this feature when `HAVE_GETADDRINFO` isn't
set, to avoid a broken build. We might want to handle that in the C
sources in a future commit.
[^1]: 68fa9bf3f5/m4/curl-functions.m4 (L2067-L2070)
[^2]: 68fa9bf3f5/lib/config-win32.h (L511-L528)Closes#9727
`HAVE_SIGNAL` means the availability of the `signal()` function in
autotools, while in CMake it meant the availability of that function
_and_ the symbol `SIGALRM`.
The latter is not available on Windows, but the function is, which means
on Windows, autotools did define `HAVE_SIGNAL`, but CMake did not,
introducing a slight difference into the binaries.
This patch syncs CMake behaviour with autotools to look for the function
only.
The logic came with the initial commit adding CMake support to curl, so
the commit history doesn't reveal the reason behind it. In any case,
it's best to check the existence of `SIGALRM` directly in the source
before use. For now, curl builds fine with `HAVE_SIGNAL` enabled and
`SIGALRM` missing.
Follow-up to 68fa9bf3f5Closes#9725
A custom `HAVE_GETADDRINFO` check came with the initial CMake commit
[1]. A later commit [2] added a standard check for it as well. The
standard check run before the custom one, so CMake ignored the latter.
The custom check was also non-portable, so this patch deletes it in
favor of the standard check.
[1] 4c5307b456
[2] aec7c5a87cCloses#9731
Enable `HAVE_UNISTD_H`, `HAVE_STRTOK_R` and `HAVE_STRCASECMP` detection
on Windows, instead of having predefined values.
With these features detected correctly, CMake Windows builds get closer
to the autotools and `config-win32.h` ones.
This also fixes detecting `HAVE_FTRUNCATE` correctly, which required
`unistd.h`.
Fixing `ftruncate()` in turn causes a build warning/error with legacy
MinGW/MSYS1 due to an offset type size mismatch. This env misses to
detect `HAVE_FILE_OFFSET_BITS`, which may be a reason. This patch
force-disables `HAVE_FTRUNCATE` for this platform.
Reviewed-by: Daniel Stenberg
Closes#9687
Detecting headers and lib separately makes sense when headers come in
variations or with extra ones, but this wasn't the case here. These were
duplicate/parallel macros that we had to keep in sync with each other
for a working build. This patch leaves a single macro for each of these
dependencies:
- Rely on `HAVE_LIBZ`, delete parallel `HAVE_ZLIB_H`.
Also delete CMake logic making sure these two were in sync, along with
a toggle to turn off that logic, called `CURL_SPECIAL_LIBZ`.
Also delete stray `HAVE_ZLIB` defines.
There is also a `USE_ZLIB` variant in `lib/config-dos.h`. This patch
retains it for compatibility and deprecates it.
- Rely on `USE_LIBSSH2`, delete parallel `HAVE_LIBSSH2_H`.
Also delete `LIBSSH2_WIN32`, `LIBSSH2_LIBRARY` from
`winbuild/MakefileBuild.vc`, these have a role when building libssh2
itself. And `CURL_USE_LIBSSH`, which had no use at all.
Also delete stray `HAVE_LIBSSH2` defines.
- Rely on `USE_LIBSSH`, delete parallel `HAVE_LIBSSH_LIBSSH_H`.
Also delete `LIBSSH_WIN32`, `LIBSSH_LIBRARY` and `HAVE_LIBSSH` from
`winbuild/MakefileBuild.vc`, these were the result of copy-pasting the
libssh2 line, and were not having any use.
- Delete unused `HAVE_LIBPSL_H` and `HAVE_LIBPSL`.
Reviewed-by: Daniel Stenberg
Closes#9652
This header is for providing the argument types for recv() and send()
when built to not use a dedicated config-[platfor].h file.
Remove the slow brute-force checks from configure and cmake.
This change also removes the use of the types for select, as they were
not used in code.
Closes#9592
1. Re-enable `HAVE_GETADDRINFO` detection on Windows
Commit d08ee3c83d (in 2013) added logic
that automatically assumed `getaddrinfo()` to be present for builds
with IPv6 enabled. As it turns out, certain toolchains (e.g. original
MinGW) by default target older Windows versions, and thus do not
support `getaddrinfo()` out of the box. The issue was masked for
a while by CMake builds forcing a newer Windows version, but that
logic got deleted in commit 8ba22ffb20.
Since then, some CI builds started failing due to IPv6 enabled,
`HAVE_GETADDRINFO` set, but `getaddrinfo()` in fact missing.
It also turns out that IPv6 works without `getaddrinfo()` since commit
67a08dca27 (from 2019, via #4662). So,
to resolve all this, we can now revert the initial commit, thus
restoring `getaddrinfo()` detection and support IPv6 regardless of its
outcome.
Reported-by: Daniel Stenberg
2. Omit `bcrypt` with original MinGW
Original (aka legacy/old) MinGW versions do not support `bcrypt`
(introduced with Vista). We already have logic to handle that in
`lib/rand.c` and autotools builds, where we do not call the
unsupported API and do not link `bcrypt`, respectively, when using
original MinGW.
This patch ports that logic to CMake, fixing the link error:
`c:/mingw/bin/../lib/gcc/mingw32/9.2.0/../../../../mingw32/bin/ld.exe: cannot find -lbcrypt`
Ref: https://ci.appveyor.com/project/curlorg/curl/builds/44624888/job/40vle84cn4vle7s0#L508
Regression since 76172511e7Fixes#9214Fixes#9393Fixes#9395Closes#9396
Avoids failing test 1014 by replicating configure checks
for HAVE_ATOMIC and _WIN32_WINNT with custom CMake tests.
Reviewed-by: Marcel Raad
Follow up to #8680Closes#9312
Update the ngtcp2 find module to detect the boringssl backend. Determine
if the underlying OpenSSL implementation is BoringSSL and if so use that
as the ngtcp2 backend.
Reviewed-by: Jakub Zakrzewski
Closes#9065
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
-- curl version=[7.81.0-DEV]
CMake Warning (dev) at /usr/share/cmake-3.22.1/Modules/FindPackageHandleStandardArgs.cmake:438 (message):
The package name passed to `find_package_handle_standard_args` (MBEDTLS)
does not match the name of the calling package (MbedTLS). This can lead to
problems in calling code that expects `find_package` result variables
(e.g., `_FOUND`) to follow a certain pattern.
Call Stack (most recent call first):
deps/curl/CMake/FindMbedTLS.cmake:31 (find_package_handle_standard_args)
deps/curl/CMakeLists.txt:473 (find_package)
This warning is for project developers. Use -Wno-dev to suppress it.
Closes#8207
Prior to this change HAVE_IOCTLSOCKET_CAMEL_FIONBIO mistakenly checked
for (lowercase) ioctlsocket when it should have checked for IoctlSocket.
Closes https://github.com/curl/curl/pull/7375
The CMake `try_compile` command is especially slow for
the Xcode generator. With this patch applied it first tests
for the currently used (and Open Group specified) send/recv
signature. In case this fails testing falls-back to the
permutations.
speed-up:
```
time cmake .. -GNinja -DCMAKE_USE_SECTRANSP=ON -DHTTP_ONLY=ON -DCMAKE_USE_LIBSSH2=OFF
before: 11.64s user 11.09s system 55% cpu 40.754 total
after: 7.84s user 6.57s system 51% cpu 28.074 total
```
```
time cmake .. -GXcode -DCMAKE_USE_SECTRANSP=ON -DHTTP_ONLY=ON -DCMAKE_USE_LIBSSH2=OFF
before: 217.07s user 104.15s system 60% cpu 8:51.79 total
after: 108.76s user 51.80s system 58% cpu 4:32.58 total
```
Closes#7158
This was previously defined by the obsolete AC_TYPE_SIGNAL macro,
which was removed in 2682e5f5. The deprecation text says
> Your code may safely assume C89 semantics that RETSIGTYPE is void.
So, remove it and just use void instead.
Closes#6861
By differentiating between ON and AUTO it can make a missing zlib
library a hard error when CURL_ZLIB=ON is used.
Reviewed-by: Jakub Zakrzewski
Closes#6221Fixes#6173
When using clang-cl on windows -fvisibility=hidden is not an known
argument. Instead it behaves exactly like MSVC in this case. So let's
make sure we take that path.
In CMake clang-cl sets both CMAKE_C_COMPILER_ID=clang and MSVC get's
defined since clang-cl is basically a MSVC emulator. So guarding like we
do in this patch seems logical.
Reviewed-by: Jakub Zakrzewski
Closes#6194
include zstd curl patch for Makefile.m32 from vszakats
and include Add CMake support for zstd from Peter Wu
Helped-by: Viktor Szakats
Helped-by: Peter Wu
Closes#5453
Add three new CMake Find modules (using the curl license, but I grant
others the right to apply the CMake BSD license instead).
This CMake config is simpler than the autotools one because it assumes
ngtcp2 and nghttp3 to be used together. Another difference is that this
CMake config checks whether QUIC is actually supported by the TLS
library (patched OpenSSL or boringssl) since this can be a common
configuration mistake that could result in build errors later.
Unlike autotools, CMake does not warn you that the features are
experimental. The user is supposed to already know that and read the
documentation. It requires a very special build environment anyway.
Tested with ngtcp2+OpenSSL+nghttp3 and quiche+boringssl, both built from
current git master. Use `LD_DEBUG=files src/curl |& grep need` to figure
out which features (libldap-2.4, libssh2) to disable due to conflicts
with boringssl.
Closes#5359
We use `check_c_source_compiles` to check possible send/recv signatures
by reproducing the forward declarations from system headers. On Windows
the `winsock2.h` header adds dll linkage settings to its forward
declaration. If ours does not match the compiler warns:
warning C4273: 'recv': inconsistent dll linkage
Add `WINSOCK_API_LINKAGE` to our test signatures when it is defined so
that our linkage is consistent with that from `winsock2.h`.
Fixes#4764Closes#5232
Reported by the new script 'scripts/copyright.pl'. The script has a
regex whitelist for the files that don't need copyright headers.
Removed three (mostly usesless) README files from docs/
Closes#5141
- remove check for unsupported old CMake versions
- do not link to c-ares library twice
- modernize custom Find modules
- FindLibSSH2:
- pass version to FPHSA to show it in the output
- use LIBSSH2_VERSION define to extract the version number in
one shot. This variable exists in the header for 10 years.
- remove unneeded code
- FindNGHTTP2.cmake:
- drop needless FPHSA argument
- mark found variables as advanced
- FindNSS.cmake:
- show version number
- FindCARES.cmake:
- drop default paths
- use FPHSA instead of checking things by hand
- remove needless explict variable dereference
- simplify count_true()
- allow all policies up to version 3.16 to be set to NEW
- do not rerun check for -Wstrict-aliasing=3 every time
In contrast to every other compiler flag this has a = in it, which CMake
can't have in a variable name.
- only read the interesting strings from curlver.h
Reviewed-by: Peter Wu
Closes https://github.com/curl/curl/pull/4975
- Add "libssh2" name to FindLibSSH2 library search.
On Windows systems, libSSH2 CMake installation may name the library
"LibSSH2".
Prior to this change cmake only checked for name "ssh2". On Linux that
works fine because it will prepend the "lib", but it doesn't do that on
Windows.
Closes https://github.com/curl/curl/pull/4804
Options are cross-checked with configure.ac and acinclude.m4.
Tested on Arch Linux, untested on other platforms like Windows or macOS.
Closes#4663
Reviewed-by: Kamil Dudka
CMake interprets an elseif() with no arguments as elseif(FALSE),
resulting in the elseif() block not being executed. That is not what
was intended here. Change the empty elseif() to an else() as it was
intended.
Closes#4101
Reported-by: Artalus <artalus-mail@yandex.ru>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
- remove unused variables
- declare conditionally used variables conditionally
- suppress unused variable warnings in the CMake tests
- remove dead variable stores
- consistently use WIN32 macro to detect Windows
Closes https://github.com/curl/curl/pull/3739
With CMAKE_TRY_COMPILE_TARGET_TYPE set to STATIC_LIBRARY, the try_compile()
(which is used by check_c_source_compiles()) will build static library
instead of executable. This avoids linking additional libraries in and thus
speeds up those checks a little.
This commit also avoids #3743 (GSSAPI build errors) on itself with cmake
3.6 or above. That issue was fixed separately for all versions.
Ref: #3744
Use 'GNUInstallDirs' standard module to set destinations of installed
files.
Use uppercase "CURL" names instead of lowercase "curl" to match standard
'FindCURL.cmake' CMake module:
* https://cmake.org/cmake/help/latest/module/FindCURL.html
Meaning:
* Install 'CURLConfig.cmake' instead of 'curl-config.cmake'
* User should call 'find_package(CURL)' instead of 'find_package(curl)'
Use 'configure_package_config_file' function to generate
'CURLConfig.cmake' file. This will make 'curl-config.cmake.in' template
file smaller and handle components better. E.g. current configuration
report no error if user specified unknown components (note: new
configuration expects no components, report error if user will try to
specify any).
Closes https://github.com/curl/curl/pull/2849
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
Currently CMake cannot detect Brotli support. This adds detection of the
libraries and associated header files. It also adds this to the
generated config.
Closes#2392
The config files define curl and libcurl targets as imported targets
CURL::curl and CURL::libcurl. For backward compatibility with CMake-
provided find-module the CURL_INCLUDE_DIRS and CURL_LIBRARIES are
also set.
Closes#1879
Detect support for compiler symbol visibility flags and apply those
according to CURL_HIDDEN_SYMBOLS option.
It should work true to the autotools build except it tries to unhide
symbols on Windows when requested and prints warning if it fails.
Ref: https://github.com/curl/curl/issues/981#issuecomment-242665951
Reported-by: Daniel Stenberg
Fix the check code to pass 5 arguments instead of 6. This typo was
introduced by commit aebfd4cfbf (cmake: fix gethostby{addr,name}_r in
CurlTests, 2014-10-31).
Set CMAKE_REQUIRED_DEFINITIONS to include definitions needed to get
the winsock2 API from windows.h. Simplify the order of checks to
avoid extra conditions.
Use check_include_file instead of check_include_file_concat to look
for OpenSSL headers. They do not need to participate in a sequence
of dependent system headers. Also they may cause winsock.h to be
included before ws2tcpip.h, causing the latter to not be detected
in the sequence.
Reviewed-by: Brad King <brad.king@kitware.com>
Remove use of an old hack that takes advantage of the auto-dereference
behavior of the if() command to detect if a variable is defined. The
hack has the form:
if("${VAR} MATCHES "^${VAR}$")
where "${VAR}" is a macro argument reference. Use if(DEFINED) instead.
This also avoids warnings for CMake Policy CMP0054 in CMake 3.1.
Revert commit 2257deb502 (Cmake: Avoid cycle directory dependencies,
2014-08-22) and add a comment explaining the purpose of the original
code.
The check_library_exists_concat macro is intended to be called multiple
times on a sequence of possibly dependent libraries. Later libraries
may depend on earlier libraries when they are static. They cannot be
safely linked in reverse order on some platforms.
Signed-off-by: Brad King <brad.king@kitware.com>
Revert commit 1269df2e3b (Cmake: Don't check for all headers each
time, 2014-08-15) and add a comment explaining the purpose of the
original code.
The check_include_file_concat macro is intended to be called multiple
times on a sequence of possibly dependent headers. Later headers
may depend on earlier headers to provide declarations. They cannot
be safely included independently on some platforms.
For example, many POSIX APIs document including sys/types.h before some
other headers. Also on some OS X versions sys/socket.h must be included
before net/if.h or the check for the latter will fail.
Signed-off-by: Brad King <brad.king@kitware.com>
Otherwise Curl_gethostname always fails. Windows has gethostname
since Vista according to
http://msdn.microsoft.com/en-us/library/ms738527%28VS.85%29.aspx, but
accordings to byte_bucket's VC 2005 documentation, it is available even
in Windows 95. (possibly after installing a Platform SDK, the
Windows Server 2003 SP1 Platform SDK should be sufficient).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
There were several -Wunused warnings and one duplicate macro definition.
The EXTRA_DEFINES variable of the CurlCheckCSources macro was being
abused ("__unused1\n#undef inline\n#define __unused2", seriously?) to
insert extra C code. Avoid this broken abstraction and use cmake's
check_c_source_compiles directly (works fine with CMake 2.8, maybe
even cmake 2.6).
After cleaning up all related variables (EXTRA_DEFINES,
HEADER_INCLUDES, auxiliary headers_hack), also remove a duplicate
add_headers_include macro and remove duplicate header additions before
the struct timeval check.
Oh, and now the code is converted to use CheckCSourceRuns and
CheckCSourceCompiles, the two curl-specific helpers can be removed.
Unfortunately, the cmake output is now slightly more verbose. Before:
Performing Test int send(int, const void *, size_t, int) (curl_cv_func_send_test)
Performing Test int send(int, const void *, size_t, int) (curl_cv_func_send_test) - Failed
Since check_c_source_compiles prints the varname, now you see:
Performing Test curl_cv_func_send_test
Performing Test curl_cv_func_send_test - Failed
Tested: int send(int, const void *, size_t, int)
Compared cmake output with each other using vimdiff, no functional
differences were found. Tested with GCC 4.9.1 and Clang 3.5.0.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
This patch cleans up the automatically-generated (?) code and fixes one
case that will always fail due to syntax error.
HAVE_GETHOSTBYADDR_R_5_REENTRANT always failed because of a trailing
character ("int length;q"). Several parameter type and unused variable
warnings popped up. This causes a detection failure with -Werror.
Observe that the REENTRANT cases are exactly the same as their
non-REENTRANT cases except for a `_REENTRANT` macro definition.
Merge all these pieces and build one big main function with different
cases, but reusing variables where logical.
For the cases where the parameters where NULL, I looked at
lib/hostip4.c to get an idea of the parameters types.
void-cast variables such as 'rc' to avoid -Wuninitialized errors.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
autotools does not use features.h nor _BSD_SOURCE. As this macro
triggers warnings since glibc 2.20, remove it. It should not have
functional differences.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
It tries hard to recognise SDK's on different platforms. On windows MIT
Kerberos installs SDK with other things and puts path into registry.
Heimdal have separate zip archive. On linux pkg-config is tried, then
krb5-config script and finally old-style libs and headers detection.
Command line args:
* CMAKE_USE_GSSAPI - enables GSSAPI detection
* GSS_ROOT_DIR - if set, should point to the root of GSSAPI installation
(the one with include and lib directories)
Because we prepended libraries to list, CMake had troubles resolving
link directory order as it detected some cycles. Appending to list ensures
that dependencies will preceed dependees.
One header at a time is the right way. Apart from that the output on
windows goes from:
...
-- Looking for include files I:/src/libssh2-1.4.3/include/libssh2.h, ws2tcpip.h
-- Looking for include files I:/src/libssh2-1.4.3/include/libssh2.h, ws2tcpip.h
- found
-- Looking for 3 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., wins
ock2.h
-- Looking for 3 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., wins
ock2.h - found
-- Looking for 4 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., stdi
o.h
-- Looking for 4 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., stdi
o.h - found
-- Looking for 5 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., wind
ows.h
-- Looking for 5 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., wind
ows.h - found
-- Looking for 6 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., wins
ock.h
-- Looking for 6 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., wins
ock.h - found
-- Looking for 7 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., sys/
filio.h
-- Looking for 7 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., sys/
filio.h - not found
-- Looking for 7 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., sys/
ioctl.h
-- Looking for 7 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., sys/
ioctl.h - not found
-- Looking for 7 include files I:/src/libssh2-1.4.3/include/libssh2.h, ..., sys/
resource.h
...
To much nicer:
...
-- Looking for ws2tcpip.h
-- Looking for ws2tcpip.h - found
-- Looking for winsock2.h
-- Looking for winsock2.h - found
-- Looking for stdio.h
-- Looking for stdio.h - found
-- Looking for windows.h
-- Looking for windows.h - found
-- Looking for winsock.h
-- Looking for winsock.h - found
-- Looking for sys/filio.h
-- Looking for sys/filio.h - not found
-- Looking for sys/ioctl.h
-- Looking for sys/ioctl.h - not found
-- Looking for sys/resource.h
CMake 2.6 is already a bit old. Many bugs have been fixed since
its release. We use 2.8 in our company and we have no intention
of polluting our environment with old software, so 2.6 would
not be tested. This shouldn't be a problem since all one need
to build CMake from source is C and C++ compiler.
All C and H files now (should) feature the proper project curl source
code header, which includes basic info, a copyright statement and some
basic disclaimers.
The CheckTypeSize module that comes with CMake 2.6.2 and above does
everything we need and also supports cross-compiling. Avoid duplicating
an older version of it here. This also fixes a cross-compiling error
because the old line
include ("${CMAKE_MODULE_PATH}/CheckTypeSize.cmake")
failed because CMAKE_MODULE_PATH is a search path and not a directory.
Signed-off-by: Brad King <brad.king@kitware.com>
