- added test cases for various code paths
- fixed handling of blocked write when stream had
been closed inbetween attempts
- re-enabled DEBUGASSERT on send with smaller data size
- in debug builds, environment variables can be set to simulate a slow
network when sending data. cf-socket.c and vquic.c support
* CURL_DBG_SOCK_WBLOCK: percentage of send() calls that should be
answered with a EAGAIN. TCP/UNIX sockets.
This is chosen randomly.
* CURL_DBG_SOCK_WPARTIAL: percentage of data that shall be written
to the network. TCP/UNIX sockets.
Example: 80 means a send with 1000 bytes would only send 800
This is applied to every send.
* CURL_DBG_QUIC_WBLOCK: percentage of send() calls that should be
answered with EAGAIN. QUIC only.
This is chosen randomly.
Closes#11756
In parallel with ngtcp2, quiche also offers the `quiche_conn_on_timeout`
interface for the application to invoke upon timer
expiration. Therefore, invoking the `on_timeout` function of the
Connection is crucial to ensure seamless functionality of quiche with
timeout events.
Closes#11654
- refs #11449 where a segfault is reported when IP Eyeballing did
not immediately connect but made several attempts
- The transfer initiating the eyeballing was initialized too early,
leadding to references to the filter instance that was then
replaced in the subsequent eyeball attempts. That led to a use
after free in the buffer handling for the transfer
- transfers are initiated now more lazy (like in the ngtcp2 filter),
when the stream is actually opened
- suppress reporting on quiche event errors for "other" transfers
than the current one to not fail a transfer due to faults in
another one.
- revert recent return value handling for quiche_h3_recv_body()
to not indicate an error but an EAGAIN situation. We wish quiche
would document what functions return.
Fixes#11449Closes#11469
Reported-by: ウさん
- refs #11449 where weirdness in quiche multi connection tranfers was
observed
- fixes lookup of transfer for a quiche event to take the connection
into account
- formerly, a transfer with the same stream_id, but on another connection
could be found
Closes#11462
- fix HTTP/2 check to not declare a connection dead when
the read attempt results in EAGAIN
- add H2-PROXY alive check as for HTTP/2 that was missing
and is needed
- add attach/detach around Curl_conn_is_alive() and remove
these in filter methods
- add checks for number of connections used in some test_10
proxy tunneling tests
Closes#11368
- Use CURL_FORMAT_CURL_OFF_T where %zd was erroneously used for some
curl_off_t variables.
- Use %zu where %zd was erroneously used for some size_t variables.
Prior to this change some of the Windows CI tests were failing because
in Windows 32-bit targets have a 32-bit size_t and a 64-bit curl_off_t.
When %zd was used for some curl_off_t variables then only the lower
32-bits was read and the upper 32-bits would be read for part or all of
the next specifier.
Fixes https://github.com/curl/curl/issues/11327
Closes https://github.com/curl/curl/pull/11321
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
- ngtcp2 and quiche implementations relied on the DONE_SEND event
to forward the EOF for uploads to the libraries. This often
result in a last 0 length EOF data. Tracking the amount of
data left to upload allows EOF indication earlier.
- refs #11205 where CloudFlare DoH servers did not like to
receive the initial upload DATA without EOF and returned
a 400 Bad Request
Reported-by: Sergey Fionov
Fixes#11205Closes#11207
This works around #11138, by doubling the limit, and should be a
relatively safe fix.
Ideally the buffer would grow as needed and there would be no need for a
limit? But that might be follow-up material.
Fixes#11138Closes#11139
- `drain` was used by http/2 and http/3 implementations to indicate
that the transfer requires send/recv independant from its socket
poll state. Intended as a counter, it was used as bool flag only.
- a similar mechanism exists on `connectdata->cselect_bits` where
specific protocols can indicate something similar, only for the
whole connection.
- `cselect_bits` are cleard in transfer.c on use and, importantly,
also set when the transfer loop expended its `maxloops` tries.
`drain` was not cleared by transfer and the http2/3 implementations
had to take care of that.
- `dselect_bits` is cleared *and* set by the transfer loop. http2/3
does no longer clear it, only set when new events happen.
This change unifies the handling of socket poll overrides, extending
`cselect_bits` by a easy handle specific value and a common treatment in
transfers.
Closes#11005
- with `--proxy-http2` allow h2 ALPN negotiation to
forward proxies
- applies to http: requests against a https: proxy only,
as https: requests will auto-tunnel
- adding a HTTP/1 request parser in http1.c
- removed h2h3.c
- using new request parser in nghttp2 and all h3 backends
- adding test 2603 for request parser
- adding h2 proxy test cases to test_10_*
scorecard.py: request scoring accidentally always run curl
with '-v'. Removed that, expect double numbers.
labeller: added http1.* and h2-proxy sources to detection
Closes#10967
- callbacks and filter methods might be invoked at unexpected
times, e.g. when the transfer's stream_ctx has not been initialized
yet or, more likely, has already been taken down.
- check for existance of stream_ctx in such places and return
an error or silently succeed the call.
Closes#10951
- remove NGHTTP2 members of `struct HTTP`
- add `void *h2_ctx` to `struct HTTP`
- add `void *h3_ctx` to `struct HTTP`
- separate h2/h3 pointers are needed for eyeballing
- manage local stream_ctx in http implementations
Closes#10877
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
- ngtcp2: using bufq for recv stream data
- internal stream_ctx instead of `struct HTTP` members
for quiche, ngtcp2 and msh3
- no more QUIC related members in `struct HTTP`
- experimental use of recvmmsg(), disabled by default
- testing on my old debian box shows no throughput improvements.
- leaving it in, but disabled, for future revisit
- vquic: common UDP receive code for ngtcp2 and quiche
- vquic: common UDP send code for ngtcp2 and quiche
- added pytest skips for known msh3 failures
- fix unit2601 to survive torture testing
- quiche: using latest `master` from quiche and enabling large download
tests, now that key change is supported
- fixing test_07_21 where retry handling of starting a stream
was faulty
- msh3: use bufq for recv buffering headers and data
- msh3: replace fprintf debug logging with LOG_CF where possible
- msh3: force QUIC expire timers on recv/send to have more than
1 request per second served
Closes#10772
- use the defined, but so far not used, KEEP_SEND_HOLD bit for flow
control based suspend of sending in transfers.
Prior to this change KEEP_SEND_PAUSE bit was used instead, but that can
interfere with pausing streams from the user side via curl_easy_pause.
Fixes https://github.com/curl/curl/issues/10751
Closes https://github.com/curl/curl/pull/10753
- add parameter to `conn_is_alive()` cfilter method that returns
if there is input data waiting on the connection
- refrain from re-using connnection from the cache that have
input pending
- adapt http/2 and http/3 alive checks to digest pending input
to check the connection state
- remove check_cxn method from openssl as that was just doing
what the socket filter now does.
- add tests for connection reuse with special server configs
Closes#10690
- time_connect was not updated when the overall connection failed,
e.g. when SSL verification was unsuccessful, refs #10670
- rework gather those values to interrogate involved filters,
also from all eyeballing attempts, to report the maximum of
those values.
- added 3 test cases in test_06 to check reported values on
successful, partially failed and totally failed connections.
Reported-by: Master Inspire
Fixes#10670Closes#10671
vquic stabilization
- udp send code shared between ngtcp2 and quiche
- quiche handling of data and events improved
ngtcp2 and pytest improvements
- fixes handling of "drain" situations, discovered in scorecard
tests with the Caddy server.
- improvements in handling transfers that have already data or
are already closed to make an early return on recv
pytest
- adding caddy tests when available
scorecard improvemnts.
- using correct caddy port
- allowing tests for only httpd or caddy
Closes#10451
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
- ECONNECTREFUSED has not its own fail message in quic filters
- Debug logging in connect eyballing improved
- Fix bug in ngtcp2/quiche that could lead to false success reporting.
Reported-by: Divy Le Ray
Fixes#10245Closes#10248
- quiche in debug mode did not build, fixed.
- moved all vquic implementation files to prefix curl_* to avoid
the potential mixups between provided .h files and our own.
- quich passes test 2500 and 2502. 2501, the POST, fail with
the body being rejected. Quich bug?
Closes#10242
